Volumetric Flasks
Sizes available include a 1 ml volumetric flask, a 100 ml volumetric flask, and a 1l volumetric flask. As sizes are measured precisely, they eliminate the need for repetitive volume measurements and increase accuracy.
Volumetric flasks are manufactured to the highest quality and materials. Options include autoclavable and chemical-resistant plastics such as a polypropylene volumetric flask.
Plastic flasks offer break-resistant properties to ensure safety and are easy to clean within the lab in case of an accident or spillage.
Glass and Pyrex volumetric flasks are also an ideal solution to increase accuracy as they are transparent, colored, and coated for handling light-sensitive liquids.
-
Blown in high quality, heavy duty polypropylene plastic Microwavable and autoclavable for easy cleaning and sterilization Features a highly visible graduation line Flask is fitted with screw cap to prevent leakage Designed for use in professional laboratories, but is also an ideal choice for…
-
ValueWare® Volumetric Flasks, Class A, Unserialized, Ts Stopper
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
An excellent alternative to glass flasks, these glass flasks are made from PMP are gravimetrically calibrated to contain at 20º C. These plastic volumetric flasks meet Class B tolerances per DIN EN ISO 1042.
-
Borosil® Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard PP stoppers. Flasks comply with ASTM E-288-Class A. 20mL option is not covered in ASTM. 5mL, 10mL, and 20mL options have a trapezoidal shape…
-
Molded to class B tolerance in translucent polypropylene with a tooled neck. Each flask is individually calibrated. Supplied complete with polypropylene stoppers and have the material and temperature characteristics printed in green.
-
KIMAX® Heavy-Duty Wide Mouth Class A Volumetric Flasks with Glass Stoppers
DWK Life Sciences (Kimble)Clear glass with glass stoppers Pipet access is easy with wide mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars …
-
KIMAX® Heavy-Duty Wide-Mouth Class A Volumetric Flasks
DWK Life Sciences (Kimble)Clear Glass With PE Stoppers Pipet access is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars …
-
Volumetric Flasks, Class A, Kohlrausch
DWK Life Sciences (Kimble)Capacity: 500mL Tolerance: ±0.20mL Rubber Stopper Size: 9 Approx. Height: 264mm
-
Class B Polymethypentene (PMP) Volumetric Flasks
Thermo Scientific NalgeneProtect against leakage, breakage, and contamination. Thermo Scientific™ Nalgene™ Class B Polymethylpentene (PMP) Volumetric Flasks with Screw Caps are calibrated "To Contain" and "To Deliver" at 20°C. Flasks are lighter in weight than glass, more transparent…
-
Calibrated "to contain" Red stripe, through which capacity mark is etched for legibility and permanence Barrel-shaped Standard Taper glass stoppers
-
Borosil® Amber Light Blocking Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard taper glass stoppers. Flasks comply with ASTM E-288, Class A. 20mL option is not covered in ASTM. 5mL, 10mL, and 20mL…
-
These flasks are for use in determining phosphoric acid in mixed fertilizer. Flasks feature a wide neck and heavy construction throughout.
-
Volumetric flasks for microchemical work, sizes 1 through 5mL, are designed in accordance with the recommendations of the Committee of Microchemical Apparatus, Analytical Division of the A.C.S. Solid Standard Taper glass stopper and hexagonal base Calibrated to contain at 20°C, in…
-
Sibata Glass Erlenmeyer Flask
Vee Gee ScientificThe Erlenmeyer Flask features heavy-duty rim to reduce chipping, white permanent graduations, and marking squares. It is made from high-quality borosilicate tubing with a low coefficient of expansion.
-
These PYREX® standard volumetric flasks conform to Class A capacity tolerances prescribed by ASTM. However, to facilitate transfer of crystals, salts and powders, the open end has been expanded on the 25mL and 50mL sizes. The standard 18-410 G.P.I. thread screw caps have a durable cone-shaped…
-
Low actinic red stained glass provides protection to light sensitive solutions. Allowing less than 1% transmission below 400nm and 5% from 400-600nm. Wide mouth design facilitates mixing, pipette access, sampling and filling. Unique Flat Bottom Interior permits the use of a standard stir bar. Large…
-
Colorware Class A Flasks
DWK Life Sciences (Kimble)Available with markings in four colors, the KIMAX® Colorware flasks are brighter in appearance than traditional glassware with white markings. These flasks are also commonly used to help reduce cross-contamination and for easy identification of glassware between labs. KIMAX®…
-
Dual angled sidearm fittings can be used for aseptically transferring medium into or out of angled sidearm spinner flasks or for sparging the medium with gases. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Two 316 stainless steel tubes,…
-
Flask Only 200 ml
CorningThese PYREX® 200mL volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 13 Standard Taper glass stoppers.…
-
These PYREX VISTA volumetric flasks are designed for use by customers that do not require the precision accuracy of our Class A capacity flasks. The shape, body and wall are the same as regular flasks but display the large blue marking spot and designation "PYREX VISTA" unique to the…
-
PYREX® Class A Volumetric Flasks
CorningThese PYREX® volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for Standard Taper glass stoppers. Stoppers are…
-
KIMAX Brand Volumetric Flasks With Stopper
DWK Life Sciences (Kimble)Calibrated "to contain", they are designed from ASTM Specification E288, Class B requirements Sizes 10 through 50 mL include Standard Taper 9 glass stopper; size 100 mL, Standard Taper 13; sizes 200 and 250 mL, Standard Taper 16, size 500 mL, Standard Taper 19; 1,000 mL, Standard Taper…
-
Flask, Volumetric, Pilot Plant
Ace GlassLarge volumetric flask with joint and flat bottom. Available with or without graduation mark. See 8255-18 and 8255-20 for 34/28 and 40/35 stoppers.
-
Made of high quality borosilicate 3.3 glass Includes polyethylene snap cap Single graduation line for precise dilution and preparation Class A as per ASTM-E288 Volumeteric flaks made of durable borosilicate 3.3 glass with a single graduation mark. Fitted with a chemically-resistant…
-
These Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 PTFE color-coded keyhole stoppers. For replacement stoppers see No. 7630. The graduation line is sharp and permanent. Large white block letters make the…
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Borosil® Wide Mouth Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard taper glass stoppers. Flasks comply with ASTM E-288, Class A. 20mL option is not covered in ASTM. 5mL, 10mL, and 20mL options have…
-
Volumetric Flask, Class B, with Snap Cap
United Scientific SuppliesDurable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A plastic snap cap is included.
-
Scan the QR code printed directly on the body of the flask to retrieve a PDF of the calibration batch certificate Made of high quality, heavy duty, borosilicate 3.3 glass. Can withstand high temperatures & thermal shocks Class A tolerance conforms to ISO 1042 standards Ground socket fitted with…
-
KIMAX Brand Class A Volumetric Flasks
DWK Life Sciences (Kimble)Calibrated "to contain " Standard Taper stoppers (4997K13 to K76) Size 2 mL is test-tube shape and not marked A (as tolerances are larger) Sizes 5 mL and larger are designed for Federal Specification NNN-F-289 and meet ASTM Standard E 288 Capacity/stopper size given in listings …