Vapor Traps
These devices, including vacuum traps, glass cold traps, dry ice condensers, and steam traps, are designed to condense or absorb vapors from experiments or vacuum systems. They protect sensitive instruments and maintain a clean air environment, essential for precise scientific work.
Vapor traps are available in various designs to suit different types of vapors and laboratory setups, ensuring that labs can maintain the highest standards of safety and cleanliness
-
Adapter Vacuum ST 24/40
DWK Life Sciences (Kimble)Vertical adapter with vacuum take-off and drip tip.
-
High Vacuum System Trap
Ace GlassVacuum trap system protects gauge heads, like our 14034, and pumps from corrosive vapors and particle fouling. System consists of a Dewar flask, cold trap and inlet arm. High-vacuum stopcocks are used throughout. Gauge & inlet arm are Ace-Thred connections. Pump & manifold connections are o-ring joints.
-
Vactrap™ G
Foxx Life SciencesFoxx Life Sciences’ Vactrap™ G (Glass) is the ultimate vacuum trap system, adhering to the strictest CDC recommendations for laboratory safety. With its new continuous full vacuum rating, it is ideal for protecting vacuum lines and users. Vactrap™ G safely contains waste produced during supernatant…
-
PYREX® Replacement Trap
CorningThis specially designed PYREX® trap is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C) Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation and absorbed in a…
-
Replacement glassware for Buchi rotary evaporators. The C glassware set is the most popular and is available with either a plain or safety coated outer trap. Outer trap bodies, codes -01 & -03 do not include plugs. Order separately 1 each 13295-08 and 1 each 13295-10.
-
SYNTHWARE Cylindrical Vacuum Traps
Kemtech AmericaVacuum Trap, Cylindrical Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.
-
SYNTHWARE Vacuum Traps, Hose Connections
Kemtech AmericaVacuum Trap, Hose Connections Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.
-
Trap, Rotary Evaporator, Anti-Splash
Ace GlassBump trap for use between the rotary evaporator's steam tube and evaporator flask, preventing fluid from being drawn into the condenser.
-
SYNTHWARE Vacuum Trap with #15 O-Ring Joint
Kemtech AmericaVacuum Trap Body Joint: 45/50 O-ring Joint Size: #15 Outer Body OD: 50mm Outer Body Length: 250mm below joint supplied with two size 116 Viton O-rings
-
Vacuum Traps, Threaded Body
Ace GlassConsists of Body with Ace-Thred, adjustable Inner Tube and Nylon Bushing with FETFE O-Ring. Available with optional threaded tubing adapters (-75,-78), or modified with #15 Ace-Threds on inlet/outlet for use with PTFE Ace-Safe connectors to allow safe easy tubing connect-disconnect. Simply attach…
-
Adapter Valve No.15 O-Ring Joints
Ace GlassBorosilicate glass valve adapter with various Hi-Vac valve sizes and (2) No.15 O-Ring joints. Ideal for assembling Schlenk or vacuum lines Comes with (2) size -116 FETFE O-Rings.
-
-
Trap is designed for large volume solvent vapor removal during rotary evaporation. Trap is placed between the vacuum source and the rotary evaporator to prevent solvent vapors from entering the vacuum pump. PLASTIC COATED to contain solvent in case of breakage and supplied complete with a…
-
Replacement glassware for Buchi rotary evaporators. Available with either a plain or safety coated outer trap. Outer trap bodies, codes -01 and -03 do not include a plug. Order separately 1 each 13295-10.
-
Two-Piece Vacuum Traps with Hose Connection
SP Wilmad-LabGlassThese borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.
-
Thomas Nos. 1166V25, 1166V26 and 1166V28 Same as 8746 except adjustable inlet and outlet tubes have six ring hose connections. O.D. of smallest ring is 14mm; largest is 16mm. Thomas Nos. 1166V27 and 1166V29 Vacuum trap,Complete with a 51mm x 250mm body with a hose²connection side…
-
Dry Ice Trap, Twin
Ace GlassTwin chambered dry ice condenser-trap similar to 8748 except dry ice finger condensers in this unit are NOT removable. Ports at top for connecting to Rotary Evaporator and to vacuum source are 3/8" O.D. Condensate stopcock at bottom is 4mm PTFE, 90 degree bore, that allows draining each chamber…
-
Vacuum Trap Com Size 21
DWK Life Sciences (Kimble)Outlets are 180º apart for easy installation into a variety of vacuum systems. Protects the mechanical pump from attack by corrosive vapors which can be condensed by using liquid nitrogen or dry ice/slurry mixtures. Two-piece construction allows removal of condensate.
-
Complete Vacuum Traps
ChemglassTwo piece vacuum trap connected with an inner and outer joint to facilitate cleaning.
-
Trap, Rotary Evaporator, Elliptical
Ace GlassSpace saving, Elliptical shaped, bump trap. For use in Rotary Evaps between the steam tube and the evaporator flask. Prevents fluid from being drawn into the condenser. Shape allows for the same effect as standard traps but with less space between the flask and evaporator tube. This allows for use…
-
Vacuum Guage Trap
ChemglassTrap provides protection of vacuum gauges from particulates which contaminate the mercury when the gauge is vented to the atmosphere. Supplied packed with glass wool. Hose connections have a 9mm OD at the middle serration.
-
Rotary Evaporator Bump Traps, Modified
ChemglassTrap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
-
SYNTHWARE Large Volume Vacuum Traps
Kemtech AmericaVacuum Trap, Large Volume Capacity: 500 and 1000mL available.
-
Complete Vacuum Traps with 3/8" Hose Connections
SP Wilmad-LabGlassWidely used to protect vacuum pumps from contamination, these borosilicate glass vacuum traps are a one piece unit with two 3/8" hose connectors. Connectors are 180° apart to ease connection of heavy wall rubber tubing used in basic vacuum set-ups. These traps are frequently used with…
-
-
Vacuum Trap
Ace GlassUsed for freezing out undesired vapors in the vacuum system and also for use in conjunction with Dewar flasks.
-
Vactrap™2 Round Tubing
Foxx Life SciencesFoxx Life Sciences' Vactrap2™ is the world's most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, Vactrap2™ safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all,…
-
Vacuum Trap
Ace GlassVacuum trap with joint to facilitate cleaning. Available modified with top tube bent in line with side tube, but in opposite direction.
-
-
Insect/Vegetation sweeping net 10" Diameter frame 36" lightweight aluminum handle Rubber grip for dependable handling 12" deep nylon net is durable for years of use This net has 10? frame, made of steel wire and 36? light weight aluminum handle with a rubber grip to ensure dependability when…
-
Dry Ice Condenser-Trap, with Ace-Threds
Ace GlassTwin chambered dry ice condenser-trap,for Rotary Evaporator use. Squatty design 18"high, two chambers. Dry ice fingers secured in main body via #50 Ace-Thred, bushings, and O-Rings allowing for easy cleaning. Two ports at top of chamber are 3/8" O.D. (for connecting to evaporator & vacuum source).…