Vapor Traps
-
Rotary Evaporator Bump Traps, Modified
ChemglassTrap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
-
Vactrap™2 Round Tubing
Foxx Life SciencesFoxx Life Sciences' Vactrap2™ is the world's most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, Vactrap2™ safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all,…
-
Vactrap™ G
Foxx Life SciencesFoxx Life Sciences’ Vactrap™ G (Glass) is the ultimate vacuum trap system, adhering to the strictest CDC recommendations for laboratory safety. With its new continuous full vacuum rating, it is ideal for protecting vacuum lines and users. Vactrap™ G safely contains waste produced during supernatant…
-
O-Ring Style Vacuum Traps
ChemglassSimilar to CG-4515 traps but having an o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration…
-
SYNTHWARE Micro Dewar Vacuum Traps
Kemtech AmericaVacuum Trap, Dewar, Micro Reservoir Capacity: 100mL Stopcock: Glass or Teflon options available 2mm Stopcock Bore
-
Vacuum Trap, O-Ring Flange Connection
Ace GlassVacuum trap assembly with o-ring flange connection. This design has flexibility and ease of assembly-disassembly for cleaning. Comes with Viton o-ring and stainless steel pinch clamp.
-
Trap is designed for large volume solvent vapor removal during rotary evaporation. Trap is placed between the vacuum source and the rotary evaporator to prevent solvent vapors from entering the vacuum pump. PLASTIC COATED to contain solvent in case of breakage and supplied complete with a…
-
Complete Vacuum Traps
ChemglassTwo piece vacuum trap connected with an inner and outer joint to facilitate cleaning.
-
SYNTHWARE Vacuum Trap with #15 O-Ring Joint
Kemtech AmericaVacuum Trap Body Joint: 45/50 O-ring Joint Size: #15 Outer Body OD: 50mm Outer Body Length: 250mm below joint supplied with two size 116 Viton O-rings
-
Dewar Type PTFE Stopcock Vacuum Traps
ChemglassDewar style trap CONDENSERS designed for large volume solvent removal. Lower reservoir has a capacity of either 500 or 1000mL, with a 4mm PTFE stopcock. Serrated hose connections are 12mm at the smallest serration and 14mm at the largest serration. Optional UHMW Lid prevents evaporation of dry…
-
Dry Ice Trap, Twin
Ace GlassTwin chambered dry ice condenser-trap similar to 8748 except dry ice finger condensers in this unit are NOT removable. Ports at top for connecting to Rotary Evaporator and to vacuum source are 3/8" O.D. Condensate stopcock at bottom is 4mm PTFE, 90 degree bore, that allows draining each chamber…
-
High Vacuum System Trap
Ace GlassVacuum trap system protects gauge heads, like our 14034, and pumps from corrosive vapors and particle fouling. System consists of a Dewar flask, cold trap and inlet arm. High-vacuum stopcocks are used throughout. Gauge & inlet arm are Ace-Thred connections. Pump & manifold connections are o-ring joints.
-
Trap, Rotary Evaporator, Anti-Splash
Ace GlassBump trap for use between the rotary evaporator's steam tube and evaporator flask, preventing fluid from being drawn into the condenser.
-
Vactrap™ XL Vacuum Trap System
Foxx Life SciencesFoxx Life Sciences VactrapXL™ is the world's most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, VactrapXL safely contains waste from supernatural removal, chemical separation, and cell or tissue culture media aspiration. Best of all,…
-
-
Vacuum Trap Size 21
DWK Life Sciences (Kimble)Connections are 180º apart for easy installation into a variety of vacuum systems. Protects the mechanical pump from attack by corrosive vapors which can be condensed by using liquid nitrogen or dry ice/slurry mixtures.
-
SYNTHWARE Dual Vacuum Trap Assembly
Kemtech AmericaVacuum Trap Assembly, Dual Joints: #15 O-ring, with high vaccum valves
-
SYNTHWARE Two-Piece Vacuum Trap with #15 O-Ring Joint
Kemtech AmericaVacuum Trap with #15 O-ring joint Features 0-12mm high vaccum valve as the shut off. Connection is made via a 57mm O-ring flat flange. Length below flange is 300mm. Steel Clamps sold seperately.
-
-
Adapter Vacuum ST 24/40
DWK Life Sciences (Kimble)Vertical adapter with vacuum take-off and drip tip.
-
Complete Vacuum Traps with 3/8" Hose Connections
SP Wilmad-LabGlassWidely used to protect vacuum pumps from contamination, these borosilicate glass vacuum traps are a one piece unit with two 3/8" hose connectors. Connectors are 180° apart to ease connection of heavy wall rubber tubing used in basic vacuum set-ups. These traps are frequently used with…
-
Self washing, rotary evaporator trap design by Dr. William Boulanger. Superior design prevents blow-through and enables continuous addition with rotary evaporators. Solvent vapor rapidly flows out while condensed solvent continuously rinses both the trap walls and the evaporator shaft returning any…
-
Two-Piece Vacuum Traps with Hose Connection
SP Wilmad-LabGlassThese borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.
-
Thomas Nos. 1166V25, 1166V26 and 1166V28 Same as 8746 except adjustable inlet and outlet tubes have six ring hose connections. O.D. of smallest ring is 14mm; largest is 16mm. Thomas Nos. 1166V27 and 1166V29 Vacuum trap,Complete with a 51mm x 250mm body with a hose²connection side…
-
Dry Ice Condenser / Trap, with Reservoir
Ace GlassTrap,dry ice condenser,glass hose connections,PTFE stopcock bottom.
-
Replacement glassware for Buchi rotary evaporators. The C glassware set is the most popular and is available with either a plain or safety coated outer trap. Outer trap bodies, codes -01 & -03 do not include plugs. Order separately 1 each 13295-08 and 1 each 13295-10.
-
Trap, Rotary Evaporator, Anti-Climb
Ace GlassUpper tubulation prevents migration of film and foam directly into the condenser.
-
Freezing Section, 29/42
labForce® (powered by Thomas Scientific)Prevents corrosion by acid and alkaline vapors, moisture, etc., entrained during evacuation of distilling apparatus, vacuum desiccators, etc. Freezing trap, when immersed in suitable freezing mixture, removes condensable vapors, gauge liquid or other foreign material accidentally introduced…
-
Vacuum Trap, Vertical Side Arm
Ace GlassModified version of 8750 series of vacuum traps, with side arm bent 90 degrees upward for easier attachment of vacuum tubing. For use with vacuum systems to capture undesirable vapors. Fits easily into Dewar flasks.
-
Deep nylon net, Approximately 27" 12" diameter Lightweight aluminum handle Simple assembly and disassembly for convenient storage Great for catching insects and small fish This lightweight insect and fish collecting net is comprised of a 32" sturdy aluminum handle and a 12" diameter basket…
-
Replacement glassware for Buchi rotary evaporators. Available with either a plain or safety coated outer trap. Outer trap bodies, codes -01 and -03 do not include a plug. Order separately 1 each 13295-10.
-