STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore…

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables Best…

Actiosart: Ultra-cleaning of gasses (e.g. to absorb unpleasant smells). MBS housing with high-adsorptive active carbon filling, and two PTFE membranes at 0.45 µm and 5 µm, respectively. Units have male luer slip outlets on both ends.

Thermo Scientific Nalgene sterile syringe filters are ideal for sterilizing (0.2 micron) or clarifying biological solutions, such as cell culture and microbial media, reagents and additives, proteinaceous solutions, and buffers. PES (polyethersulfone) – Lowest protein binding and…

High-quality Econofilters are shipped in large packs and are ideal for busy labs that need fast, efficient filtration. Ideal for busy, high-volume labs Choose from a variety of membrane types and pore sizes   Agilent Technologies products are intended for…

30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…

Finneran 13mm Syringe Filters with glass fiber membranes are available in 1.0um, 2.0um and 5.0um pore sizes. Glass fiber membranes have fast filtration flow, elminate sample contamination and have good chemical compatibility. Finneran syringe filters are autoclavable.

30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…

Increased throughput and speed of sample preparation Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are…

Increased throughput and speed of sample preparation. Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are integrity tested…

30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…

Minisart RC: Ready-to-use syringe filter units with hydrophilic, solvent-resistant Regenerated Cellose (RC) membranes. Provide simple, rapid and reliable ultracleaning of small-volume samples for the HPLC or GC analysis.

75/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Glass Fiber (GF) For viscose solutions or for turbid liquids. Ideal for use…

Syringe Filter; 30 mm

This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. 25 mm syringe filter is recommended for filtering 10–100 milliliter (mL) volumes to remove particles prior to…

EZFlow 25mm sample prep syringe filters are designed for aqueous and orga-nic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are in a variety of filter…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Mixed Cellulose Ester (MCE) Filtration of aqueous solutions; effectively…

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables …

Increased throughput and speed of sample preparation. Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are integrity tested…

A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: RC…

3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The…

This 25 mm syringe filter with a Mixed Cellulose Esters membrane, for non-sterile filtration, has a 0.22 µm pore size used in Fine particle removal from aqueous solutions. Designed for fine particle removal from aqueous solutions Polyvinyl Chloride (PVC) housing Hydrophilic…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Cellulose acetate (CA) sterile/non-sterile Cellulose acetate filters show a…

Increased throughput and speed of sample preparation. Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are integrity tested…

30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…

30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…

EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with…

CHROMAFIL® syringe filters – Ideal for GC, HPLC and UHPLC sample filtration By using CHROMAFIL® syringe filters unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation. So, filtering your samples leads to an increase of…

Increased throughput and speed of sample preparation. Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are integrity tested…

Filtration of samples prior to injection can improve the results of your analysis and extend the life of your column. MicroLiter’s syringe filters are manufactured with the most advanced construction methods and design features available today. A variety of media types and pore sizes are…

mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand…