Lab Glass Stopcocks
-
SYNTHWARE Glass High Vacuum Double Oblique Bore Stopcocks
Kemtech AmericaStopcock, High Vacuum, Double Oblique, Synthware, Bore: 4mm, Plug Size: 17.35/50, Stem OD: 10mm, With solid glass plug, Precision ground with corresponding numbers on the barrel and the plug.
-
PTFE Stopcock Valve, 2 Way
Ace GlassPTFE stopcock valve, 2-way, one 1/4 inch male luer port and one 1/4 inch male NPT port, 0.046 orifice. PTFE valve used with NPT fittings. Various ends available (male and female NPT, luer, 1/4" tube and 1/4"-28 UNF). IPS PTFE Stopcocks made of virgin PTFE. Compression ferrules made of virgin PTFE.…
-
Stopcock, High Vacuum
Ace GlassPrecision grade, with 3-way oblique stopcock. Available with oblique bore hollow or solid plug. Plug has hole to permit evacuation of the lower chamber and prevents leakage through the bottom.
-
Spigot "Air"
BürkleNo additional ventilation opening required, PE, transparent, 3/4" thread connection outside. Self-venting NW 13 mm Seal made of natural rubber
-
Stopcock, Polyethylene Miniature
DynalonMiniature Stopcocks. The low friction properties of high density polyethylene allows for easy turning of key which requires no lubricant, thus eliminating blockage of the bores with grease.
-
-
High Vacuum Single Oblique Stopcocks
ChemglassHollow plug, oblique bore stopcock is precision ground with corresponding numbers on barrel and plug. Lower vacuum chamber is evacuated via a separate hole in the plug which is not in the line of flow.
-
Exposed O-ring Tip Valves
ChemglassHi-vac valve with two sidearms sealed to the barrel at a 90° angle to one another. Designed with a precision external thread for fine control.
-
IBC Discharge Valve
BürkleIBC discharge valve with 90° hose nozzle and sealing cap. The hose can also be closed with the enclosed sealing cap. Hose nozzle external PA Ø 30 mm, suitable for flexible hoses. The IBC discharge valve is a sturdy, high-quality ball valve with a hose connection and connection adapter…
-
-
SYNTHWARE High Vacuum Valve Plugs
Kemtech AmericaHigh Vacuum Valve Plug, PTFE Protected, Synthware, Size: 0-4, 0-8 or 0-12mm available, Plug has a machined in PTFE tip O-ring to make the primary seal.
-
Commercially available spigots made of the materials polyethylene or polypropylene cannot be used for solvents. The spigot StopCock PA is made of electrically conductive polyamide and therefore perfectly suitable for solvents. StopCock PA fits onto 3/4" outer threads and with the…
-
Stopcock Assembly
Thermo Scientific NalgenePhase interface visible down to stopcock. Polypropylene funnel and screw closure are chemically inert, translucent, autoclavable and have no known solvents at room temperature. Susceptible to softening and swelling from strong oxidizers and aggressive solvents. TFE stopcock assembly has…
-
SYNTHWARE High Vacuum Valves, 180 Degree
Kemtech AmericaHigh Vacuum Valve, 180 Degree, Synthware, Size: 0-4 or 0-8mm available, Side Arm OD: 9mm.
-
T-Bore PTFE Plug Stopcocks
ChemglassA 1:5 taper PTFE stopcock with three stems sealed 90º apart. PTFE plug has a "T" shaped bore to connect any two or all three stems.
-
Pressure Release Bubbler
ChemglassBUBBLERS, HIGH CAPACITY, CHECK VALVES, High capacity check valve bubbler keeps oil and air from being drawn into a reaction system when negative pressure is developed. Bubbler has two 1/2" swagelock type fittings on top permitting one side to be connected to the nitrogen source and one side to…
-
Glass Plug Straight Bore Stopcocks
ChemglassThe 2mm through 6mm bore sizes are supplied complete with the listed size metal retaining clip CG-423. The 8mm and 10mm bore sizes are supplied with a #29 and #34 CG-145 Keck clip respectively.
-
T-BORE, CAPILLARY ARMS, Similar to CG-436, but with all three arms being made of 2mm ID capillary tubing. 120°, A 1:5 taper PTFE stopcock with three sidearms sealed 120º apart. Plug has a bore to allow connection of any two arms at once.
-
Chem-Vac™ Hi-Vac Valves
ChemglassCHEM-VAC™ valve has single sidearm sealed at a 90º angle to the barrel. This inexpensive configuration allows for the lower portion of the barrel to be sealed directly to the apparatus being constructed, making for more compact, stronger assemblies. Valve has a TFE plug with three…
-
For lubricating ground glass joints, glass stopcocks and valves, Tensette Pipets, and for sealing desiccators. Lubricant has low vapor pressure and resists attack by acidic and alkaline solutions. Hach products are intended for sale/shipment within the US only. International customers…
-
Exposed O-ring Tip Valves
ChemglassVALVES, IN-LINE, EXPOSED O-RING TIP, Hi-vac valve with bent arms to minimize hold up of fluids that would occur in conventional valves. Designed with a precision external thread for fine control. VALVES, 3-WAY, EXPOSED O-RING TIP, Hi-vac valve with three way configuration for use in construction…
-
SYNTHWARE Glass High Vacuum Stopcocks, T-Type
Kemtech AmericaStopcock, High Vacuum, T-Type, Synthware, Bore: 2 or 4mm available, Plug Size: 12.6/40 or 17.35/50 available, Stem OD: 8 or 10mm available, with hollow glass plug, Precision ground with corresponding numbers on the barrel and plug.
-
SYNTHWARE PTFE Double Oblique Bore Stopcock Plugs
Kemtech AmericaStopcock Plug, Double Oblique, PTFE, Synthware, Bore: 2 or 4mm available, Plug Size: 12.9/44 or 14.4/44 available.
-
High vacuum stopcock that eliminates exposure to corrosive materials. Use to at least 13.6 Kg internal pressure. Variable openings from 0-3mm to 0-10mm. Ultimate vacuum of 10-7 can be realized with standard three seals. Smooth acting valve permits fine
-
SYNTHWARE Glass T-Bore Stopcocks
Kemtech AmericaStopcock, T-Bore, Glass, Synthware, Multiple Bore and plug sizes available, with solid glass plug.
-
Adapter, Claisen, Stopcock
Ace GlassClaisen adapter. Center tube has 10/30 outer top for 76mm immersion thermometer and a 24/40 inner bottom. 75 degree take-off arm with 24/40 outer top and 24/40 inner stopcock side arm. Available with glass or PTFE stopcock plug.
-
SYNTHWARE Glass High Vacuum Oblique Stopcocks
Kemtech AmericaStopcock, High Vacuum, Oblique, Synthware, Bore: 4 and 8mm, Plug Size: 17.35/50 or 25/65 available, Stem OD: 10 or 16mm, with hollow plug, Precision ground with corresponding numbers on the barrel and the plug.
-
SYNTHWARE Sublimation Apparatus
Kemtech AmericaSublimation Apparatus, Synthware, Capacity: 100 or 150mL available, Flange Size: 57 or 80mm available, supplied complete with condenser, flask, O-ring and horseshoe clamp.
-
Replacement one-piece stem and control knob for our NEW 0-14mm drain valve. Available with either a red indicator band used for high temperature applications up to 230°C, or with a blue indicator band used for low temperature applications down to -60°C. The high temperature plug…
-
PYREX Brand Stopcocks
CorningValves, In-Line, Rotaflo® For vacuum or pressure work Borosilicate glass, with Teflon® stem providing chemically inert seal Require no lubrication Permit precide control of liquid or gas flow at temperatures from -40°C to +200°C Maximum vacuum 10 -8 torr…
-
Chem-Vac™ Glass Portion Only 90° Valves
ChemglassCHEM-VAC™ valve glass portion only. Valve has two sidearms sealed to the barrel at a 90º angle to one another. Heavy duty rounded coarse thread and precision formed tapered seat. Dimensions as listed. PLEASE NOTE: THE 0-20mm BORE SIZE IS OUR PREVIOUS STYLE CG-500 SERIES VALVE…
-
HI-VAC® Straight Valves with Tip O-Rings and CTFE Plug
DWK Life Sciences (Kimble)This straight high-vacuum valve is for use in vacuum applications up to 5 x 10-7 Torr. Designed with a precision external thread for fine control Can be used as a bleed up to 1/2 turn Full open position is at 1-1/2 turns Primary seal is made with a FKM o-ring on a tapered seat …