Radiation Chemical Process Indicators (CPIs) are manufactured to meet performance specifications described in ANSI/AAMI/ISO 11140-1 “Sterilization of health care products - Chemical indicators - Part 1: General Requirements,” for Class 1 Process Indicators. The color transitions are…

Propper BI-OK® self-contained biological indicators for Steam and EO gas are designed for sterilization efficacy monitoring in hospitals, clinics, and for industrial applications. After processing in a sterilization cycle and activation of media by crushing the glass vial, indicators need to be…

Dry Heat Chemical Process Indicators (CPIs) are designed to signal, through a transition in color, when exposed to high temperatures such as dry heat and steam sterilization or depyrogenation processes. The CPIs will transition from the initial to the signal color depending on the temperature and…

Sure-Check Pouches with built-in internal/external multi-parameter steam sterilization indicators confirm all sterilization criteria—time, temperature and presence of steam. Until now, due to limitations in technology, sterilization pouches have had only single parameter chemical…

The SporView Self-Contained Biological Indicators (BIs) are approved for use in gravity, prevacuum, and flash cycles. SporViewPlus can also be purchased with 50 BIs and 50 STEAMPlus™ integrators per pack, for immediate release of routine or flashed loads. Final visual spore growth is recorded…

Crosstex manufactures Bacillus subtilis (Cell Line 5230) Spore Suspensions utilized in low temperature (<121°C) steam sterilization processes. The Spore Suspensions are pure suspensions of spores with known steam resistance characteristics and a variety of population levels standardized per…

The Vapor Line® Reusable Steam Sterilization Process Challenge Test is a reusable process challenge device for use in prevacuum steam sterilization processes at 273°F/134°C.  It consists of a metal capsule with a removable cap equipped with a plastic holder for the Propper…

Crosstex manufactures Bacillus subtilis (Cell Line 6633) Spore Suspensions utilized in low temperature (<121°C) steam sterilization processes. The Spore Suspensions are pure suspensions of spores with known steam resistance characteristics and a variety of population levels standardized per…

These all-paper, high quality, gusseted sterilization packaging bags are available in three sizes and are manufactured to meet stringent requirements. The exterior of each bag carries a pre-printed process indicator to allow easy identification of packs that have been subjected to the steam…

For monitoring the efficacy of steam, ethylene oxide gas, chemical vapor and dry heat sterilization processes used in healthcare facilities, body modification parlors and industry.  Biological monitoring is recommended weekly, but preferably daily, and with every load containing implants.…

Smalstrip Sterilization Indicator Strips are an economical alternative to OK strips and are designed for monitoring steam sterilization cycles at 250°F (121°C) and 273°F (134°C). It uses the same reactive ink as the OK strip. The correct endpoint is indicated when the…

Kimtech™ Pure Kimguard Sterilization Wrap is a must-have tool for sterile processing environments, such as in pharmaceuticals and medical devices. The line comes in six grades of wrap fabric, from KC 100 to KC 600, so you can get precisely the right protection for your needs. The higher the…

Self-adhesive Steri-Dot® Indicators offer a fast, positive visual check on items that were sterilized by Ethylene Oxide gas. They also display a Red for Stop, Green for Go color scheme. A Red Steri-Dot® indicates that the package or load has not yet passed through sterilization - a Green…

The Vapor Line® integrator is a chemical indicator for monitoring the essential conditions of steam sterilization processes - saturated steam, temperature, and time in gravity displacement and pre-vacuum sterilizers operating in the 250°F - 272°F temperature range. The integrator…

Strate-Line Sterilization Indicator Strips are an economical alternative to OK strips and are designed for monitoring steam sterilization cycles at 250°F (121°C) and 273°F (134°C). It uses the same reactive ink as the OK strip. The correct endpoint is indicated when the…

Mini Self-Contained Biological Indicators (SCBIs) for Monitoring Steam Sterilization Processes, Geobacillus stearothermophilus Cell Line 7953, SCBIs each 8.4 mm x 45.5 mm, 10 5 population level, 25 per box, ISO 11138-1, 11138-3 and USP compliant where applicable.

VERIFY™ Dual Species Self-Contained Biological Indicators (SCBIs) are for use in monitoring steam sterilization and ethylene oxide (EO) sterilization processes. Each SCBI is completely self contained within a vial and contains a disc inoculated with dual species bacterial spores (Geobacillus…

Label Applicators Direct reading dials on the label applicators allow the operator to set expiration date, sterilizer number, Julian calendar date, and load number according to the system used by the hospital. For use with Duo-Record® large labels. Each applicator is of a sturdy,…

Process indicators are printed on the pouch corners and covered by the extension of the transparent film beyond the sealed area. This guarantees protection of the indicators from direct contact with metal trays or instruments, yet does not obstruct observation of the indicator color change. …

Heat-Sealable Chex-All® Tubes are premium quality sterile packaging products designed to reduce the cost of sterilization processing. The tubes have independent indicators imprinted on both inside and outside of every roll. While external indicators serve as process indicators, the internal…

Adhesive tape for use with dry heat sterilization. Use these tapes to enhance confidence that sterilization has occurred. Color changes from white to brown. Conforms with ISO 11140/2005

Steam Dot Blu™ utilizes the latest in environmentally friendly inks: the Blu™ ink technology. All products made with Blu™ inks are free of all heavy metals, including lead.  Environmentally Friendly Technology: Manufactured without lead & heavy metals …

Steam Sterilization Monitor Strips are used for evaluating sterilization process. These indicators which are specified by the U.S. military specification MIL-S- 36586 are GMP requirements of U.S. FDA. Appearance: Filter paper strip impregnated with spores of standard culture of…

Cardinal Health™ Paper Sterilization Pouch combines a blue film and a medical grade paper to provide breathability, sterile barrier, and indication of processing. Each pouch includes an external process indicator for Steam and Ethylene Oxide (EO) Gas sterilization. To assist opening, a…

A strong wrap especially suitable for heavy instrument trays Features: Efficient microbial barrier and provides for pack security Virtually lint free and has a tightly anchored fiber structure Does not delaminate and can be used on either side Excellent liquid repellency and…

Separate color-coded envelopes for steam and EO gas sterilization: Each envelope is specifically designed for its sterilization process, and contains checklists for operators All essential data is in one place: Each envelope holds charts, indicators, Duo-Record cards and biological monitoring…

Chemical indicator strips, for use with steam sterilizers, require a temperature of 132 to 135°C (270 to 275°F). Daily verification ensures that items being processed have been run through a cycle, preventing the accidental use of items that have not been adequately processed.

Ethylene Oxide (EO) Chemical Process Indicators (CPIs) are manufactured to meet performance specifications described in ISO 11140-1 “Sterilization of health care products - Chemical indicators - Part 1: General requirements,” for Class 1 Process Indicators. The purple-to-green color…

Twindicator® is an indicator designed for monitoring all critical parameters of steam sterilization cycles at 250°F (121°C) and 273°F (134°C). Twindicator® adds extra flexibility in sterilization monitoring: each 8” strip is perforated to allow for two 4” strips.…

Steam Chemical Process Indicators (CPIs) are manufactured to meet performance specifications described in ISO 11140-1 “Sterilization of health care products - Chemical indicators - Part 1: General requirements,” for Class 1 Process Indicators. The blue-to-pink color transition is…

Hydrogen Peroxide Chemical Process Indicators (CPIs) are manufactured to meet performance specifications as described in ISO 11140-1 “Sterilization of health card products - Chemical indicators - Part 1: General Requirements,” for Class 1 Process Indicators. Hydrogen Peroxide CPIs are…

For steam sterilization cycles of 250°F (121°C) and 273°F (134°C) OK® Strips are indicators that monitor all critical sterilization arameters: steam, time, and temperature. In sterilization cycles OK® Strips guard against incomplete steam penetration, presence of…