Sterilization Indicators Products (0)

Compare Tool

Select up to 3 products

  • Thumbnail Image for B/T Sure™ Biological Indicators


    Verifies the sterility of your instruments, glassware and other products in just two days Simple, three step process Run indicator through standard sterilization cycle; compress plastic vial to break glass ampule inside and then incubate for a minimum of 48 hours. When complete, read color...

  • Thumbnail Image for Sterikon Plus Biological Sterilization Indicator


    For monitoring the effectiveness of steam sterilization at 121°C for 15 minutes Easy-to-read; media’s color changes with growth Rapid results; read after 24 hours Sterikon ® Plus indicators contain nutrient broth, sugar, a pH indicator and spores of apathogenic bacillus stearothermophilus....

  • Thumbnail Image for Attest Biological Indicators


    1251D01 detects the presence of Bacillus stearothermophilus spores 1251D07 detects the presence of Bacillus subtilis spores 1251D01 indicators are designed for monitoring 270°F (132°C) gravity steam sterilization processes. Detection media will turn yellow in the event of a sterilization...

  • Placeholder Image for Standard Steam Autoclave Indicator Tapes


    High quality tape specially designed for steam autoclave conditions. Indicator tapes provide immediate identication to verify exposure to sterilization process. Easy to read color change indicator 60 yards rolls Available in multiple widths Designed for use at 250°F (121°C) for 30 minutes...

  • Thumbnail Image for Duo-Spore® Biological Indicator System

    Propper Manufacturing

    For monitoring the efficacy of steam, ethylene oxide gas, chemical vapor and dry heat sterilization processes used in healthcare facilities, body modification parlors and industry.  Biological monitoring is recommended weekly, but preferably daily, and with every load containing implants....

  • Thumbnail Image for Sure-Check® Sterilization Pouches


    Sure-Check Pouches with built-in internal/external multi-parameter steam sterilization indicators confirm all sterilization criteria—time, temperature and presence of steam. Until now, due to limitations in technology, sterilization pouches have had only single parameter chemical indicators...

  • Thumbnail Image for Chex-All® III Pouches

    Propper Manufacturing

    Process indicators are printed on the pouch corners and covered by the extension of the transparent film beyond the sealed area. This guarantees protection of the indicators from direct contact with metal trays or instruments, yet does not obstruct observation of the indicator color change....

  • Thumbnail Image for Paper Heat-Seal Sterilization Pouches

    Cardinal Health

    Cardinal Health™ Paper Sterilization Pouch combines a blue film and a medical grade paper to provide breathability, sterile barrier, and indication of processing. Each pouch includes an external process indicator for Steam and Ethylene Oxide (EO) Gas sterilization. To assist opening, a...

  • Thumbnail Image for OK® Sterilization Indicator Strips

    Propper Manufacturing

    For steam sterilization cycles of 250°F (121°C) and 273°F (134°C) OK® Strips are indicators that monitor all critical sterilization arameters: steam, time, and temperature. In sterilization cycles OK® Strips guard against incomplete steam penetration, presence of...

  • Thumbnail Image for O.K.® Sterilizer Bags

    Propper Manufacturing

    These all-paper, high quality, gusseted sterilization packaging bags are available in three sizes and are manufactured to meet stringent requirements. The exterior of each bag carries a pre-printed process indicator to allow easy identification of packs that have been subjected to the steam...

  • Thumbnail Image for Dry Heat Sterility Tape


    Adhesive tape for use with dry heat sterilization. Use these tapes to enhance confidence that sterilization has occurred. Color changes from white to brown. Conforms with ISO 11140/2005

  • Thumbnail Image for Strate-Line® Steam Sterilization Strips

    Propper Manufacturing

    Strate-Line Sterilization Indicator Strips are an economical alternative to OK strips and are designed for monitoring steam sterilization cycles at 250°F (121°C) and 273°F (134°C). It uses the same reactive ink as the OK strip. The correct endpoint is indicated when the...

  • Thumbnail Image for Twindicator® Sterilization Indicators

    Propper Manufacturing

    Twindicator® is an indicator designed for monitoring all critical parameters of steam sterilization cycles at 250°F (121°C) and 273°F (134°C). Twindicator® adds extra flexibility in sterilization monitoring: each 8” strip is perforated to allow for two 4” strips....

  • Thumbnail Image for SporView® Self-Contained Biological Indicators


    The SporView Self-Contained Biological Indicators (BIs) are approved for use in gravity, prevacuum, and flash cycles. SporViewPlus can also be purchased with 50 BIs and 50 STEAMPlus™ integrators per pack, for immediate release of routine or flashed loads. Final visual spore growth is recorded...

  • Thumbnail Image for Gas-Chex® EO Gas Indicator Tape

    Propper Manufacturing

    Designed for universal application: specifically formulated adhesive provides secure bonding with fabric and non-woven wraps, paper, metal and glass. The words "Gas" will change from Red to Green indicating that the pack has passed through the Ethylene Oxide sterilization cycle.

  • Thumbnail Image for Chex-All® Sterilization Pouches

    Propper Manufacturing

    Heat-Sealable Chex-All® Pouches are premium quality sterile packaging products designed to reduce the cost of sterilization processing. The pouches have independent indicators imprinted on both inside and outside of every pouch. While external indicators serve as process indicators, the internal...

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.