Lab Separatory Funnel
-
PTFE valve These improved PYREX® Squibb type separatory funnels provide an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied complete with PTFE valve assembly and a screw cap with PTFE-faced silicone liner. Valve sizes range from 2 to 8 mm.…
-
European style funnel with new leak-tight, locking stopper that will not fall out during shaking or transportation. Outer ground joint at top is a Rodaviss joint. Stopper can be secured in top joint via cap and O-ring for a positive, leak-tight seal; n
-
KIMAX Squibb Separatory Funnels With Glass Stopper
DWK Life Sciences (Kimble)Supplied with a round glass stopper and a PTFE stopcock plug Lower stems have an i.d. that allows for more complete seperation and eliminates the necessity of emptying the funnel
-
Funnel, Separatory, Squibb, Pear-Shaped
Ace GlassSeparatory funnel featuring a glass stopcock and a PTFE stopper included. See Ace family 12632 for extra stoppers.
-
Funnel Rack
Bennett WoodConstructed of hardwood, with clear laquer finish Holes are spaced 132 mm center to center. Maximum height approximatelly 48 cm; minimum 38 cm.
-
Separatory funnel featuring a PTFE stopcock and a PTFE stopper included. See Ace family 12632 for extra stoppers.
-
SYNTHWARE Separatory Funnels with Standard Taper Joint
Kemtech AmericaSeparatory Funnel, Standard Taper Joint Capacity: 10-250mL Available Joints: 14/20, 19/22, and 24/40 available PTFE Stopcock Bore: 2mm Supplied with PTFE stopcock and PTFE or glass penny-head stopper
-
Funnel Squibb Pear PTFE Stpk 1000ml
DWK Life Sciences (Kimble)KIMAX funnel is supplied with a closed-bottom linear, high-density polyethylene stopper to fit in the ground neck, and PTFE stopcock. Lower stems have an I.D. large enough that a column of liquid will "break" with the stopcock closed, thereby giving a more complete separation…
-
Funnel Separatory 1000ml
Glas-ColVentSep, a special 1000 mL separatory funnel with a built-in relief valve, can be used on Glas-Col's Bench-top Shaker or either of the Glas-Col 3D shakers. These separatory funnels feature a built-in relief valve Funnels have a fluoropolymer resin stopcock, and a screw cap with…
-
SYNTHWARE Separatory Funnels with Squibb Glass Stopcocks
Kemtech AmericaSeparatory Funnel, Squibb, Glass Stopcock, Synthware, Capacity: 30-1000mL available, Stopper Size: #13, #16, #22, or #27, Stopcock Bore: 2 or 4mm, Supplied with flask length glass stopper.
-
Squibb shaped separatory blank complete with tooled and finished ground stopper neck top. Lower portion of blank is unfinished and requires a stopcock to be sealed. NOTE: SUPPLIED WITHOUT STOPPER.
-
Glass Separatory Funnel Kits
Across InternationalIntroducing the new Ai separatory funnel kits with all PTFE valves. A separatory funnel, also known as separation funnel, separating funnel, or colloquially sep funnel, is a piece of laboratory glassware used in liquid-liquid extractions to separate (partition) the components of a mixture into two…
-
-
SYNTHWARE Sure-Grip Separatory Funnels
Kemtech AmericaSeparatory Funnel, Sure Grip, Glass or PTFE Stopper, Synthware, Capacity: 500-2000mL available, Stopper Size: #27, PTFE Stopcock Bore: 4mm, Straight section between globe and stopcock provides a sure grip while shaking and also aids in clamping.
-
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length PTFE stopper. See CG-3020-A for replacement stoppers.
-
Teflon® stopcock plug fits into the micro-finish barrel Plug reduces freezing problems and grease contamination
-
Squibb style separatory funnel with a glass stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.
-
Plastic Separatory Funnels
Thermo Scientific NalgenePolyproylene funnels resist virtually all chemicals including hydrofluoric acid (5246T01 to T19) Teflon® TFE stopcock and housing Leakproof closure and stopcock Visible phase interface TFE housing eliminates need for lubrication which reduces the possibility of…
-
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length PE stopper of the listed size. For replacement stoppers see CG-8740.
-
KIMAX Squibb Separatory Funnels With Plastic Stopper
DWK Life Sciences (Kimble)With Teflon ® stopcock plug Standard Taper ground neck has solid plug stopper of high-density polyethylene Designed for Federal Specification NNN-F-800
-
Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body
-
European squibb style separatory funnel with a PTFE stopcock. Supplied complete with a glass stopper of the listed size. For replacement stoppers see CG-3000.
-
Dropping Funnels
EiscoCYLINDRICAL Cylindrical glass dropping funnel/separatory funnel TRANSPARENT & DURABLE Made of high quality Borosilicate 3.3 glass - Transparency allows for high visibility FOR SEPARATION Used to transfer liquids - Using the stopcock allows fluids, including reagents, to dispense…
-
Squibb Separatory Funnels with PTFE Plug
SP Wilmad-LabGlassThis borosilicate glass pear-shaped separatory funnel is supplied with a Standard Taper glass stopper/stopcock and a PTFE plug.
-
Plastic Separatory Funnel Holder
United Scientific SuppliesThis non-corrosive separatory funnel holder, molded in PP, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.
-
Borosil® Separatory Funnels use a self-lubricating, replaceable PTFE stopcock that does not require grease or lubrication in order to achieve fine, smooth control of flow. Glass pennyhead stoppers included. For the best performance in the world, check out Borosil® Boroflo Screw-Thread…
-
Squibb-style dropping/separatory funnels with glass key stopcock used for precise, controlled dispensing of liquids Made of high quality borosilicate 3.3 glass with superior durability and heat tolerance Features a ground glass socket fitted with an interchangeable plastic stopper Designed…
-
Funnel 125 ml
CorningThese 125mL PYREX® glass separatory funnels have Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcocks and inner and outer 19/22 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For replacement…
-
Ungraduated Addition Funnels
DWK Life Sciences (Kimble)Cylindrical funnel has a PTFE stopcock and a glass hex head stopper 633031 is supplied without a stopper Standard Taper bottom joint is 24/40 with a drip tip Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
PEAR Pear-shaped dropping/separatory funnel TRANSPARENT & DURABLE Made of high quality Borosilicate 3.3 glass - Transparency allows for high visibility FOR SEPARATION Used to transfer liquids - Using the stopcock allows fluids, including reagents, to dispense slowly (drop-wise) …
-
These replacement 60mL PYREX® Squibb separatory funnels do not have a Polytetrafluorethylene (PTFE) valve assembly or glass stopper.
-
Similar to CG-1728, but graduated with a double scale of numbers, one up from the stopcock and one down from the capacity line. Supplied complete with listed size stopper. For replacement stoppers see CG-3018. Dimensions are the same as CG-1726.