General Purpose Sealing Film Application: Ideal for ELISA, Incubation and General Use Temperature Range: -40°C to +120°C - Certified DNase- & RNase- free - Designed to be used with both polystyrene and polypropylene plates - 2.0mil clear polypropylene film features good…

Certified DNase- & RNase- free Available in two sizes : Standard cut is compatible with all plate types; when using raised-rim plates, the standard cut must be used so the film does not extend up the side walls of the plate and cause excessive evaporation Standard cut features…

A 38 mum thick aluminum sealing foil film with a 38 mum layer of acrylic adhesive for use with 96 well plates. Fits inside the rim of raised-rim plates. AlumaSeal 96 sealing films have one partial-width end tab with no perforations. •Film dimensions are 127 mm x 78 mm (9.5 mm end tab) •Available…

Application: PCR, Sample storage and transport, Long-term storage, High throughput, Automation, Anaerobic conditions, and Re-sealing pierced plates Temperature Range: -80°C to +105°C Features & Benefits ·Hermetically seals plates to protect samples …

Polycarbonate membranes Easy cultivation of most cell types without matrix coating Treated for cell culture Inserts with 0.02 µm membrane have maximum clarity for microscopy, and are non-auto-fluorescent and highly porous Polycarbonate membranes in larger pore sizes are adaptable to many…

A comprehensive range of film and foil microplate heat seals, ideal for use with the Vitl VTS and Vitl MicroTS. Vitl stock a comprehensive range of film and foil microplate heat seals, ideal for (but not limited to) use with the Vitl VTS Microplate Heat Sealer and Vitl MicroTS Microplate Heat…

Foil Adhesive Seal  Appropriate for PCR, storage, incubation, and other high temperature applications  Peelable  Pierceable  Seal integrity: -40°C to 120°C  Certified free from DNase, RNase, nucleases and human gDNA

Designed for qPCR Optically clear film is made from heat-resistant polyester and is easy to handle and apply due to its rigidity 21A00K701 - Designed for use with raised-rim, non-skirted polypropylene, and dual component (e.g., polycarbonate/polypropylene) PCR plates. Smaller dimensions and…

Sealing films prevent evaporation and protect samples during processing storage and shipment. They have superior quality film and uniform adhesive with 2 perforated end tabs for accurate positioning. Films are packaged in zipper bags. Manufactured from 2mL polyester. Specifications: …

Ideal for ELISA, Incubation and General Use Certified DNase- & RNase- free Designed to be used with both polystyrene and polypropylene plates 2.0mil clear polypropylene film features good clarity and easy handling Specially formulated adhesive provides an excellent seal to minimize…

Unique design for maximum safety Store, dispense, and cut Parafilm®, tape, labels, and Tough-Tags®. ABS plastic dispenser designed with a safety razor that slides and cuts with no danger to fingers. Dispenser holds one or two 2-inch rolls, or one 4-inch roll.

Also useful for protecting contents of plate from contamination during multiple manual reagent additions over time. X-Pierce films are 89 mum thick vinyl with a 18 mum thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96 well plates. A precut…

Polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates. This seal is ideally suited for short term storage,…

This transparent sealing tape consists of a 2.0 mil polyolefin film coated on one side with a pressure sensitive acrylate adhesive which does not interfere with cycle reactions. It is ideal for reducing well-to-well contamination and/or spill over in sensitive PCR applications where the…

MicronPlus  adhesive sealing films have adhesive-free areas over the microplate wells so that the adhesive is not in contact with the well contents. The sealing films are made with color adhesives with outstanding chemical and temperature resistance.  The PTFE material is inert, optically…

Easily pierceable sealing foil, high solvent resistance,resealable, suitable for PCR, compound storage and sample shipping.  This sealing film has high solvent resistance and has the ability to seal samples as low as -20 degrees C, ideal for low and room temperature compound storage in DMSO…

Axygen® AxyMats™ sealing mats minimize evaporation in a wide range of temperatures in PCR and storage applications. Made of research-grade silicone, they can be autoclaved, and following a bleach wash and ethanol rinse protocol, they can also be reused. Pierceable Sealing Mat …

SealPlate ColorTab adhesive films consist of 50 mum thickness clear polyester. They minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal for ELISA, EIA, and similar assays. These unique films include a color dot and white writing area on each end tab for…

AbsorbMax films are 200 mum thick black vinyl adhesive films for use with 96 well, 384 well, and 1536 well black microplates. The films may be applied to either the top or bottom of the plate. A split backing aids in applying the film properly. Edge cutouts assist in positioning and accommodate…

Ideal for standard PCR, long-term storage, light sensitive assays and robotics Certified DNase- & RNase- free Designed for use with standard plates; not recommended for raised-rim plates Easy to pierce with pipet tips or robotic probes for direct sample recovery 1.4mil conformable…

The encapsulated silicone seal does not expose your sample to adhesive! These optically clear polyester films are ideally suited for Real Time PCR (qPCR). They feature an inert, ultra-clear, and strong encapsulated silicone adhesive that provides extraordinary performance in real-time PCR…

The Microplate Sealing Tape is clear, self-sticking tape for standard microplates.  Suitable for both 96-well and 384-well plates. The precut, pressure-senstive tape seals and reseals the surface of the plates during incubations to prevent evaporationand allow more vigorous mixing.…

Peelable from all plate types Seal integrity range: -80 °C to 110 °C Good solvent resistance including DMSO Autoclavable (121°C) Use Suitable for short term room temperature storage Suitable for very low temperature storage

Non-pierceable Peelable Seal integrity range: -20 °C to 80 °C Use Applications: sample storage (aqueous samples only) Suitable for all plate types

AlumaSeal CS sealing films are a specially formulated aluminum foil with a 50 mum layer of acrylic adhesive that withstands cold storage at temperatures between: -80 C to +120 C . Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or…

Axygen® microplate heat sealing films are designed for applications ranging from PCR and Real-Time PCR to storage. They can be used in a wide range of temperatures making them suitable for nearly any application. Thickness: 100.5 µm Material: Polyester Dimensions (mm):…

Peelable Seal integrity range: -200 °C to 110 °C High solvent resistance Autoclavable (121 °C) Use Recommended for PCR, including with water bath thermal cyclers Seals polypropylene plates Suitable for long term storage and transportation Suitable for very low…

Clear Heat Seal, Permanent Bond Appropriate for PCR, qPCR, long term storage, and disposal of hazardous substances Ideal for use with water bath thermal cyclers Seals PP plates Permanent seal, non-peelable Good resistance to DMSO and other organic solvents Difficult to…

Aluma Seal II Film are 1.5mil soft permeable aluminum foil with medical grade adhesive. It eliminates the need for heat sealing devices or mats during thermal cycling. Aluma Seal II has less of a tendency to roll back when removing the backing paper and conforms well to the plate during…

XTR films offer high performance under extreme conditions. A 2 mil polyester film with a 1.65 mil layer of strong acrylic adhesive. eXTReme Seal films remove cleanly from plate surfaces without adhesive stringing, residue or contamination. Each sealing films measures 78.3 x 140.5 mm and offers…