For sampling liquids and suspensions. The device is manufactured from 316 stainless steel. The Cup Sampler enables discrete samples to be easily taken from a height within the product. Key Features: 316L Stainless Steel Construction Single point liquid sampler Operation: Insert…

Universal powder and granules sampler made of stainless steel AISI 316L (1.4404). Developed initially for milk powder samples, conforms to standards of DIN and IDF (International Dairy Federation). The collector is inserted into bags or casks and the sample is removed using a semi-circular profile…

These 8 mL polystyrene round bottom tubes have an outer diameter of 13 mm.

Sampler for viscous substances such as pastes, mud, creams, oils. The sample is drawn in using the pump rod and directly conveyed to the sampling container. Easy cleaning for flawless sampling. Depending on the viscosity, the removable suction tip can be fitted with suction drills of 2 mm to 6 mm. …

The Ellipso-Spoon® Sampler has a specially curved shape that permits contact with all corners of bottles and containers preventing material loss. Crystals, powders, granulated and solid substances and thick liquids are easily retrieved. Autoclavable. Offset, deep spoon end retrieves…

The right test for each type of contamination Qualitative and semi-quantitative hygiene control Sterile packed and ready-for-use Easy to handle Rapid results Long shelf-life Escherichia coli and coliforms are used traditionally as indicator organisms for fecal contamination…

Ideal for collecting environmental surface sampling without touching the sponge. Polypropylene handle allows maximum contact of the sponge with the sampling surface and helps with the collection of hard-to-reach surfaces, around corners and irregular shaped areas. The PolyProbe™ is…

Allows collection from different angles, including 90° Samples liquids, powder or small solids 6' pole extends to 12’, 8' pole extends to 24' Includes 960 mL , wide mouth, high-density polyethylene bottle End of sampler swings, allowing collection of sample from a horizontal flowing…

The LaboPlast® Bio disposable scoop made of green PE is produced in our clean room of class 7 (10,000) and individually wrapped in bio-PE film for disposable use. Green PE bio-plastic has all the suitable properties of conventional polyethylene but is manufactured from renewable raw…

Sterile and non-sterile powder sampling and dispensing has never been easier thanks to the SteriWare® Powder Spatula. It is tough and comfortable to use with its specially designed rounded handle and its robust U-shaped blade. Available in 2 lengths to allow both surface and deeper powder…

polypropylene (with stopper), volume 12 mL, pk of 100

This range of heavy duty Stainless Toggle Drums from Sampling Systems are ideal for storage and production. As standard they come with a fully welded handle, silicone seal (FDA Grade) and lid. The lid is secured with pull down latches (toggle clamps). Manufactured from high grade 316L Stainless…

Single tube vacuum manifold with #15 o-ring connections on ends. Available in either 3 or 4 port configuration with 0-10 Easy Action stopcocks. Order with either 14/20, 24/40 inner joints or #15 o-ring joints on ports. Distance between ports is 95mm which allows for use of flasks up to 3 Liters.…

Ideal for use with a range of liquids. Dippers are quick and easy to use. They are ideal for obtaining a surface sample from a wide range of environments. Sampling Systems™ offer 3 sizes of Stainless dipper. Key Features Manufactured in 316L Stainless Steel Available with…

Sorbent Tube, Anasorb CSC, Coconut Charcoal, 6 x 70-mm size, 2 sections, 50/100 mg sorbent, 20/40 mesh, with GS ends and FFW separators, fits Type A tube cover.

Our range of stainless steel beakers are made from high grade 316L Stainless Steel. Available in 4 convenient sizes in a polished finish. Ideal for use in the laboratory or production environment. These multi-purpose 316 stainless steel beakers are ideal for the collection and storage of powders…

Precise liquid samples can be taken with the Target immersion cylinder. Weight 2.5 kg Incl. venting lowering cable (5 m), valve and cable reel Screw-off top enables easy cleaning

The SteriWare LiquiThief is simple to use and comes with the added advantage that there is no cleaning validation and no cleaning. The sampler is made in a cleanroom so you simply unwrap and use. If you want to buy a disposable liquid sampler then the LiquiThief is the sampler of choice. The…

The integrated valve of this sterile tool closes as it is pushed against a container bottom securing the sample for withdrawal. Sample can then be poured from the top of the tool into your sample container. Provides effective cross-sectional sampling of liquids and light creams Reaches…

The SteriPlast® food scoop, made of blue polystyrene, is produced and assembled in our class 7 clean room (10,000, except for the 1000 ml scoop), individually wrapped for disposable use and then sterilised by gamma rays. The food scoop is ideal for powders, granulates and pastes. The…

For convenient sampling from tanks, vats, streams, ponds, lakes, etc., these economy dippers are lightweight, easy to use and portable. Thread on 500mL (16 oz.) polypropylene cup can be exchanged to reduce cross contamination Two pouring spouts on cup allow left or right pouring …

These high quality Stainless Steel Buckets with swing handles are ideal for a range of applications. Crevice free interior Graduated Supplied with skirt band Robust design Manufactured from 304 Stainless Steel Lids sold seperately

Class Leading Multilevel Powder Sampler with variable Sample Volumes Key Features Made from high quality 316L stainless steel. Multi-Level Range of inserts available Ideal for free flowing powders Operation: Select the correct volume inserts. Slide the…

Available in two lengths to suit your needs, these sterile liquid thieves draw a sample with a simple pull of the handle, then dispense easily into the vessel of your choice. Ideal for sampling water and other low viscosity liquids, oils and ointments; 0.15cm (¹⁄16") tip hole…

Tubing Adapters and Connectors provide a means to connect the component shown to the screw fittings of the PTFE tubing assemblies or to connect the tubing components described.

The Steriware Powder Lance have long been a great choice for taking cross sectional samples of cohesive powders. These disposable samplers just need to be pushed into the product, rotated and withdrawn, allowing for a fast sample to be taken. They are constructed from FDA conforming HDPE, and…

QuEChERS kit with extraction materials packed in ready-to-use tubes supporting EN 15662 methodology. Volume: 50 mL Quantity: 50 MgSO4: 4 g Na Citrate: 1 g Na Citrate Sesquihydrate: 0.5 g NaCL: 1 g

Good quality and inexpensive Secchi Disk for water clarity measurements. Constructed of robust white plastic disk with permanent screen printed black sectors. Includes attached sinker and rot-proof polymer line on a polymer foam bobbin. Line length is approximately 72 feet.

The new SteriWare Blue Liquid Funnels from Sampling Systems are ideal for transferring liquids in hygienic applications. The highly visible blue colour of the funnel allows it to be easily identified if left in the product. Key Features: Moulded & packed in a Medical Cleanroom …

The SteriPlast® sample spoon made of polystyrene is produced in our clean room of class 7 (10,000), individually wrapped for disposable use and then sterilised by gamma rays. The sample spoon is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and…

All-layer sampler, with open inner tube, no separate chambers, and large sampling volume. For all-layer samples through all the layers of the sample. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be…