Water Sampling Outfit, LaMotte 3103 For collecting water samples to be tested for dissolved oxygen content Clear acrylic sampling chamber takes 60 mL sample collecting bottle Includes sampling chamber, 9866A35 Calibrated Line and nine USP Type 1 glass sample bottles with…

Dipping bottle with glass container for sampling in sewage plants, for mud and water samples. For testing crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants of Hazard Categories IIA and IIB. Completely made from non-spark producing…

The LiquiDip is a fast efficient disposable liquid sampler. It is a self-closing liquid sampler that offers both cross sectional and point sampling. A valve is housed on the base of the sampler. Upon contact with the bottom of a container, the valve will close, locking the liquid inside.…

Dipping bottle for testing mineral oil products Category A, Explosion Categories IIA, IIB and IIC, crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants. Completely made from non-spark producing materials, nickel-plated. Screw-off…

UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth. Sampler for liquid samples from precisely pre-determined depth, with hand-operated vacuum pump. Sampling using vacuum pumps has the advantage…

These high quality Stainless Steel Buckets with swing handles are ideal for a range of applications. Crevice free interior Graduated Supplied with skirt band Robust design Manufactured from 304 Stainless Steel Lids sold seperately

The SteriPlast® Bio sample spoon made of green PE is produced in our clean room of class 7 (10,000), individually wrapped in bio-PE film for disposable use and then sterilised by gamma rays. Green PE bio-plastic has all the suitable properties of conventional polyethylene but is…

The Sludge Judge® is designed to take accurate readings of settleable solids, 5% or less, in a variety of liquids, to any depth. It is ideal for sewage treatment plants, chemical plants, and food processing facilities - anywhere that accurate sample levels of settleable solids in noncaustic…

Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

We offer replacement Sample Trays for use with NexION 300 inductively coupled plasma mass spectrometry (ICP-MS) models.

Mix and Divide a Water Sample into Subsamples for Testing Provides an efficient method of preparing subsamples of collected water-sediment mixtures from stream flows for water quality analysis. Water sediment samples are poured into the sample splitter where they are composited into one…

For sampling liquids and suspensions. The device is manufactured from 316 stainless steel. The Cup Sampler enables discrete samples to be easily taken from a height within the product. Key Features: 316L Stainless Steel Construction Single point liquid sampler Operation: Insert…

Jumbo sampler with a tube diameter of 50 mm, ideal for coarse grains and larger quantities. With an open inner tube and large sampling volume, for all-layer samples through all layers of the sample or with sample chambers separated by PTFE separators for multi point sampling from several…

The SteriPlast® sample scoop made of polystyrene is produced and assembled in our clean room of class 7 (10,000, except for the 1000 ml scoop), individually wrapped for disposable use and then sterilised by gamma rays. The sample scoop is ideal for powders, granulates and pastes. The…

The disposable Slot Sampler is ideal for taking fast multilevel, cross sectional samples from powders and granules. The disposable Slot Sampler takes a single composite sample from the top, middle and bottom of your powder bed. Full batch traceability Fully welded construction (no…

Tubing Adapters and Connectors provide a means to connect the component shown to the screw fittings of the PTFE tubing assemblies or to connect the tubing components described.

The LiquiDip is a fast efficient disposable liquid sampler. It is a self-closing liquid sampler that offers both cross sectional and point sampling. A valve is housed on the base of the sampler. Upon contact with the bottom of a container, the valve will close, locking the liquid inside.…

Ideal for sampling for both production work and laboratory use, Pharma Scoops are used by pharmaceutical, food, cosmetic, and chemical companies. High handle location keeps hand further from sample Made from FDA and EU conforming materials; safe for food, drug and cosmetic use High impact…

Extract Samples at 3 Levels from One Container For proper sampling of powders, pellets and other friable materials which may become non-homogeneous in bags, this three zone sampler is invaluable. The steel point is inserted through the bag wall. When the sampler is in deep enough to cover the…

Burkle PowderDispo is ideal for taking a cross-sectional sample from within a bulk powder. Length of sample chamber 500mm. (22mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples, all-layer and cross-sectional samples of…

Ideal for surface sampling of powders and core sampling of viscous material like cheese, pastes and gels. The ‘V’ shape allows easy discharge of the powders into containers or bags. Key Features: Made from high quality 316L stainless steel. Polished finish Fully welded, crevice free…

0.25mm i.d. Carbon fiber support SC-autosampler probe for ST nebulizers, 100 µL/min uptake rate, 150 cm capillary.

PTFE Digestion Tube 50 ml (pk/6)

Twelve-inch rim dip net is fitted with a heavy canvas bag approximately 6½" deep Bag attached to metal frame with clamp rings Bottom of bag is a mesh material of approximately 500 micron nylon Canvas skirt extends three inches below bag bottom to protect mesh Aluminum pole…

Diameter: 30 mm

For busy labs, additional acid resistant, polycarbonate Racks are available for all SPB systems. Exclusive RackLock feature locks DigiTUBEs in position within the rack allowing for easy, one-handed closure of screw cap.

Available either in a large package with 100 pieces or 100 pieces packaged individually and radiation sterilised. The shade of blue that is used does not occur in a natural form in foodstuffs. Because of this, blue products or parts of them can be quickly found and easily identified in a visual…

Q-Swab is a ready-to-use sample collection and delivery device for environmental surface sampling. Money and time are saved by eliminating pipettes and broth preparation required with other sample collection methods. Each of the broths offered in Q-Swab are self-contained, gamma irradiated and held…

For collecting liquid samples from storage tanks, ponds, wells, etc. Permits collection at various depths Constructed of corrosion-resistant stainless steel, Type 302 Plunger can be activated by bumping unit on tank bottom or at any depth means of a second cord. A weighted…

The PerkinElmer seal holder is made from dense PEEK material and is compatible to use with XQ80 and XF100 pressure vessels that are installed in the multi-wave 3000 instruments.

Sampling Probe with Screw Fitting

To create a more comprehensive profile of our health and wellness vs. disease, multiple analytes need to be included in the analytical mix such as DNA, RNA, proteins, and cell morphology. Unfortunately due to the limitations of current sample collection practices this means multiple samples need to…