ICP-MS Supplies
-
Peristaltic Pump Tubing and Sample Line Supplies
Agilent TechnologiesThe peristaltic pump tubing has to be washed prior to use. The common way is to run about 5% HNO 3 (v/v) solution. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place…
-
Cone Removal Tool
Agilent TechnologiesAgilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…
-
UltiMetal Plus Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements. This product is only available to U.S. Domestic Customers. …
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Pre-heating pipe w/connector GC-ICP-MS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Sampler Cones & Care Package
Agilent TechnologiesThe ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…
-
Deflect lens
Agilent TechnologiesThe Agilent Technologies ion deflect lens is suitable for use with Agilent 7700 and 8800 ICP-MS models. Application: For Agilent 7700 & 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Tubing & Filter Kit
Agilent TechnologiesTubing and filter for Argon supply to instrument, for Agilent ICP-MS with s-lens for semiconductor analysis. Includes PTFE tubing (5 m) with fittings and connector (p/n 5063-9132), high purity Argon Gas filter (p/n 5064-8092). Suitable for 7700. Application: For Argon Supply to Instrument, for…
-
Sample tray for ICP-MS, 1/pk.
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
ISIS valve assembly kit
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Argon Clean Gas Filter
Agilent TechnologiesThe Agilent Technologies argon clean gas filter ensures high purity for all kinds of semi-conductor applications. This replacement filter is recommended for lowest background required in semiconductor applications (s-lens configuration) and is suitable for use with all Agilent ICP-MS instruments. …
-
Comprehensive Spares Kit
Agilent TechnologiesComprehensive spares kit for Agilent 7800 ICP-MS only, with x lens, excludes interface cones. Application: For Agilent 7800 ICP-MS only, with X Lens, Excludes Interface Cones This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Basic Consumables Kit
Agilent TechnologiesThe Agilent Technologies basic consumables kit consists of 12 easy-fit peristaltic pump tubes for sample (2-stop, white/white, 5005-0020), 12 waste (3-stop, yellow/blue, 5005-0022), 12 internal standard (2-stop, blue/orange, 5005-0021). It also includes PFA sample tubing measuring 0.5 mm I.D x 1.6…
-
Skimmer base, brass, 7900 w/m-lens
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
ORS Octopole Assembly
Agilent TechnologiesThe Agilent Technologies octopole reaction system (ORS) assembly is compatible with Agilent 7700, 8800 ICP-MS models. Application: For Agilent 7700, 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Octopole Reaction System Cell Focus Lens
Agilent TechnologiesThe Agilent Technologies octopole reaction system cell focus lens is suitable for use with Agilent 7700 and 8800 ICP-MS models. Application: For Agilent 7700 & 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
G1131A option - Mandatory option for a 79 with x-lens
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Ion Extraction Lens 2
Agilent TechnologiesIon extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…
-
G3690A option - Add Ni skimmer cone for x-lens, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Integrated Sample Introduction System 3 Flangeless Fitting
Agilent TechnologiesThe ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…
-
GC Interface Manual
Agilent TechnologiesThe Agilent Technologies GC interface manual provides with the necessary information required to use the specific interface. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Ion Omega Bias Lens
Agilent TechnologiesIon extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…
-
G3690A option - Add Pt skimmer cone for x-lens, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Skimmer Cone
Agilent TechnologiesICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…
-
Connectors
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Extraction-Omega Lens Assembly
Agilent TechnologiesReplacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For S-Lens of 7700 & 8800 Semiconductor ICP-MS This product is only available to U.S. Domestic Customers. …
-
Sample Probe
Agilent TechnologiesMany types of autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 and ASX 500 series used with earlier model instruments. Standard carbon fiber sample…
-
Skimmer base, stainless, 7900 w/x-lens
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Plasma/Aux gas tubing with inner sleeve
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Sampler Cones & Care Package
Agilent TechnologiesThe ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…
-
G3690A option - Add Ni sampling cone for x-lens, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Peristaltic Pump Tubing Adapter
Agilent TechnologiesAdapter for peristaltic pump tubing used on ISIS, purple/black tabs, 2.29 mm id. For use with ISIS on Agilent 7700, 8800 ICP-MS. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.