The Agilent Technologies ion deflect lens is suitable for use with Agilent 7700 and 8800 ICP-MS models. Application: For Agilent 7700 & 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…

The Agilent Technologies cassette lens shadow stop is used for protecting the clarity and visibility of the lenses in any PerkinElmer instruments. This stop is compatible to use with ion lenses. Application: For ELAN 9000/DRCs, PerkinElmer This product is only available to U.S. Domestic…

Agilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated…

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

The ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

10X magnification with LED illumination and measuring scale. Ideal for inspection and measurement of the ICP-MS sampler and skimmer cone orifice. Ten times magnification with LED illumination, manual focus and +/- 15 mm scaled reticle with 0.1 mm divisions. Includes protective case. Requires four…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements. This product is only available to U.S. Domestic Customers. …

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

Replacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For S-Lens of 8900 Semiconductor ICP-MS This product is only available to U.S. Domestic Customers. For…

Agilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated…

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Ion extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…

The Agilent Technologies octopole reaction system cell exit lens is suitable for use with Agilent 7700 and 8800 ICP-MS models. Application: For Agilent 7700 & 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies body tube assembly is suitable for use with penning gauge. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Ion extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…

Agilent manufactures a range of high quality ICP-MS replacements, accessories and consumables including PFA Inert Sample Introduction Kit Supplies. A full range of accessories are available including connector and drain tubes, injector assemblies and torches for 7500 and 7700 ICP-MS systems. All…

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

Agilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated…

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Compatible Part Std: Fitted as standard when instrument shipped from factory 18mm Pt cone insert is recommended for measuring H2SO4 above 2% Pt T-mode cones are not available T-mode is not used with ORS models Agilent Technologies products are intended for sale/shipment…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.