The Agilent Technologies 6.4 mm N adapter consists of an external thread that provides good connection and ensures a leak-tight seal. Application: For FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer This product is only available to U.S. Domestic Customers. For research use only,…

Agilent mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems are equivalent to genuine mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems. With these supplies you can be confident that it will integrate…

This assembly includes: Ajustable Torch Mount Assembly, Qty. 1 (N0790214) Viton O-Ring 20.29 mm I.D. Qty. 2 (09902223) PTFE-Coated O-Ring 2.57 mm I.D., Qty. 2 (N0791334) Torch Nut, Qty. 1 (N0776027) Torch Washer, Qty. 1 (N0776028) Torch Sleeve, Qty. 1 (N0791125)

Completely seal the plates using Captiva Pierceable 96-well silicone covers. The silicone covers are specially designed for 96-well autoinjectors, providing easy piercing and removal. This seal positions the outlet tips at a specified distance inside each well, to prevent cross contamination of…

SPME Arrows are the next-generation improvement of SPME fibers and can be used for headspace analysis or by immersion in a liquid to concentrate analyte on the Arrow. Available with a variety of polymer coatings, SPME Arrows have demonstrated up to 10 times the sensitivity of traditional SPME…

Dissolution baskets are cylindrical baskets that contain dosage forms and are placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of…

Captiva 96-well collection plates are specially designed for use with Captiva filtration plates, SPEC SPE 96-well plates, and Bond Elut 96-well plates. Captiva filtration and SPEC 96-well plates can be joined directly onto Agilent collection plates using a CaptiVac vacuum collar. This forms a…

Barrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies PEEK basket holder assembly is suitable for use with 400-DS dissolution testing apparatus. Application: For 400-DS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

This product has approximately 580 Spectra

The Vac Elut SPS 24 manifold allows you to process up to 24 SPE cartridges simultaneously. Like all Vac Elut manifolds, the SPS 24 is made from durable, solvent-resistant materials and engineered to last. The glass sides allow easy viewing of the entire sample collection process. This product is…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent offers disintegration tube plungers for the 100 automated disintegration apparatus. Application: For Agilent 100 Disintegration Apparatus This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies complete cell and window is compatible to use with cells and Hg lamps in any PerkinElmer instruments. Application: For FIMS-100/400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

The Agilent Technologies reservoir LRC with 2 frits offers a capacity of 10 cc/10 mL. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Concentration: 10,000 µg/mL Matrix:: 5% HNO3 Volume: 500 mL Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities…

Replacement Reed Valve for oil free Compressor

Sampling and manifold replacement tubing and tubing kits are available to connect an Agilent dissolution tester to a sampling instrument such as the 850-DS dissolution sampling station. These tubings should be replaced on a regular basis. Application: For 708-DS. For Motorized Manifold Options …

Instrument Calibration Standard 1

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

1.5 mm Quartz injector. Attaches to ESI spray chamber.

Captiva syringe filters offer the industry's highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to prepare small-volume samples for High-Performance Liquid Chromatography (HPLC)…

Agilent graphite platforms and tubes for PerkinElmer THGA and HGA graphite furnace AA systems are batch tested to ensure they our demanding performance requirements for contamination, sensitivity, precision, electrical resistance, and lifetime. Application: For Fume Extraction System, For THGA…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Laboratory Needle Valves are deck mounted turret base. They are straight pattern forged brass. They have a floating stainless steel needle and replaceable stainless steel seat. The handle is a four-arm handle with a color coded index button/cap.

The Agilent Technologies SPME fiber in grey color helps in extraction of required analytes from sample. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The corrosion-resistant VacElut cartridge manifolds allow simultaneous processing of multiple Bond Elut cartridges. The clear glass base allows observation of the entire sample collection process. Its compact, linear design requires little bench space. Application: For 16 x 100 mm Tubes, For Vac…

Sampling and manifold replacement tubing and tubing kits are available to connect an Agilent dissolution tester to a sampling instrument such as the 850-DS dissolution sampling station. These tubings should be replaced on a regular basis. Application: For Bio-Dis & 8000 Sampling Station Female…

The Agilent Technologies pump valve seal cap assembly can be used with all manual purge valves. Application: For All Manual Purge Valves, HPLC This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.