S-Pak sterile, individually packed, gridded membrane filters are made from mixed esters of cellulose and have been optimized for MF method microbiological analysis of water or other liquids. Type HA (0.45 µm) for total coliform or yeast and mold analysis and type RA (1.2 µm) for yeast…

CELLTREAT Vacuum Filter Systems are ideal for large volume sample separation and purification. The filter systems are manufactured in a Class 100,000 clean room, from USP class VI virgin polystyrene. The filter membrane is Polyethersulfone (PES) material in 0.22µm or 0.45µm pore sizes…

Convenience of a bottle top filter with the ability to re-use the filter housing Nalgene 320 Autoclavable Securely screws onto glass media bottles* with 33 mm or 45 mm neck sizes Deep screw threads attach directly to bottle allowing convenient filling and vacuum filtration without…

STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore…

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables Best…

Actiosart: Ultra-cleaning of gasses (e.g. to absorb unpleasant smells). MBS housing with high-adsorptive active carbon filling, and two PTFE membranes at 0.45 µm and 5 µm, respectively. Units have male luer slip outlets on both ends.

Thermo Scientific Nalgene sterile syringe filters are ideal for sterilizing (0.2 micron) or clarifying biological solutions, such as cell culture and microbial media, reagents and additives, proteinaceous solutions, and buffers. PES (polyethersulfone) – Lowest protein binding and…

High-quality Econofilters are shipped in large packs and are ideal for busy labs that need fast, efficient filtration. Ideal for busy, high-volume labs Choose from a variety of membrane types and pore sizes   Agilent Technologies products are intended for…

12/cs Angled hose barb adapter fits 3 size hose diameters and improves stability Polyethersulfone (PES) membrane for high flow and low binding Two membrane pore sizes: 0.22µm or 0.45µm Filter systems include bottle top filter and solution bottle with cap Bottle top…

Membrane filters for quantitative determination of microorganisms in QC analysis. Cellulose Nitrate (Cellulose Ester) and Cellulose Acetate filters are offered with or without a hydrophobic edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in…

Excellent choice for use in environments with extreme temperature up to 900°C and/or aggressive chemical exposure. Retention loading and air flow permeation similar to glass microfiber filters. Use wherever filters of the highest purity are needed.

EZBio® 47mm gridded disc filters are used for microbiology analysis of water and other liquids in the food, beverage, and pharmaceutical industries. The material of the gridded membrane is mixed cellulose ester and gridded with a 0.45µm pore size. Each gridded disc filter is sterilized by gamma…

Finneran 13mm Syringe Filters with glass fiber membranes are available in 1.0um, 2.0um and 5.0um pore sizes. Glass fiber membranes have fast filtration flow, elminate sample contamination and have good chemical compatibility. Finneran syringe filters are autoclavable.

Increased throughput and speed of sample preparation Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are…

mdi’s Centrifugal Filters are meant for high value laboratory applications like sterilization, purification, particulate removal and clarification of up to 500 µL of high value, difficult to get, biological/chemical samples. These filters offer a number of key features: Absolute…

Depth filtration glass micro fiber GRADE A - Fine porosity, fast flow rate, with a 1.6µm size particle retention. Frequently used in the filtration of precipitated proteins and cells. Ideally suited for use as a filter for radioimmuno assay of weak beta emitters by scintillation…

Foxx Life Sciences’ Autofil Bottle-Top Filtration Systems are disposable, sterile, vacuum operated systems for the sterile preparation of buffers, tissue culture media, microbiological media, and other biological fluids. Systems are available with asymmetric 0.22 µm (sterilization…

Ensure product integrity of Thermo Scientific™ Nalgene™ MF75 Series Filter Unit or Bottle Top Filters by using the Nalgene™ Bubble Point Test Apparatus. Tests filter unit membranes without removing the membrane from the filter unit. Cast aluminum Tests the bubble point…

Corning Spin-X UF centrifugal concentrators offer a simple, one step procedure for concentrating or desalting proteins and other biomolecules with 90% or better recovery. Integrated dead stop design eliminates risk of spinning to dryness; no respinning necessary Low binding polyethersulfone…

Increased throughput and speed of sample preparation. Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are integrity tested…

Mesh Screens for Macrofiltration Separations Spectrum provides a broad range of Spectra/Mesh Woven Filters that consist of individual strands woven into a mesh screen, characterized by precise mesh openings, percent open area and mesh thickness. There are 5 material types with different physical,…

The RC Membranes are appropriate for sample preparation in many applications and as a standalone or syringe filter membrane. This membrane media can be sterilized by all common methods keeping a mechanically stability. The superior strength assures an high chemical resistance for usage with a wide…

Depth Filtration Glass Micro Fiber GRADE C - Fine porosity, fast flow rate, with a 1.2 µm size particle retention. Primarily used for RIA procedures and harvesting lymphocytes. Binderless borosilicate glass microfiber. Particle retention: 1.20 µm Filtration speed: 25 seconds Thickness: 0.28…

30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…

From Very Fast Filtration to Very Slow Filtration, the wide range of GVS Quantitative Papers provide the right solution for any application need. Highest retention and very slow flow Extremely difficult filtrations Analytical precipitates: barium sulphate, matastannic acid and finely precipitated…

Minisart RC: Ready-to-use syringe filter units with hydrophilic, solvent-resistant Regenerated Cellose (RC) membranes. Provide simple, rapid and reliable ultracleaning of small-volume samples for the HPLC or GC analysis.

Designed for very fine precipitates Slow filtering speed; 1 µm particle retention High retentivity, which retains very fine crystalline precipitates such as cuprous oxide, lead sulfate, barium sulfate and manganese carbonate Thickness approximately 0.20 mm, 1.5 µm pore size

Nalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…

GVS MCE Filtration Membranes are composed of a mixture of inert cellulose nitrate and cellulose acetate polymers. The uniform microporous structure of these filters provides the fastest flow rates and highest throughputs available in a membrane filter. Because they are biologically inert, GVS MCE…

GVS MCE Filtration Membranes are composed of a mixture of inert cellulose nitrate and cellulose acetate polymers. The uniform microporous structure of these filters provides the fastest flow rates and highest throughputs available in a membrane filter. Because they are biologically inert, GVS MCE…

Qualitative filter papers: Made of refined pulp and cotton linters with more than 95% alpha cellulose content. The ash content of these filter papers is < 0.1% and they are essentially used for qualitative analysis. Sartorius offers two categories of qualitative filter paper: those that are wet…

30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…