Boiling Flasks
-
ValueWare® Flat Bottom Flasks, Short Neck, Full-Length
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Flask Boiling Round Bottom 250ml
DWK Life Sciences (Kimble)KIMAX® round bottom boiling flask with a short neck and a medium length Standard Taper joint Designed from ASTM Specification E1403, Type II, Class III requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Borosilicate Glass Round Bottom Boiling Flasks with Ground Glass Joints
United Scientific SuppliesBoiling, round bottom flasks with ground glass joints. Our boiling flasks are made from low-expansion borosilicate glass. Feature uniform wall thickness for superior mechanical strength and shock resistance. Ideal for boiling, heating and mixing in the laboratory.
-
-
Single Neck Flat Bottom Flasks
ChemglassSingle neck, flat bottom flask with a standard taper outer joint.
-
Round bottom, single neck flask with either a beaded tube end port or a beaded tube end well. Well I.D. on 6935-03 thru 6935-17 is approximately 9.5mm. Well I.D. on 6935-64 thru 6935-78 is approximately 9mm.
-
SYNTHWARE Round Bottom Flasks with Threaded Side Inlets
Kemtech AmericaSYNTHWARE round bottom, heavy wall, flask with standard taper outer joint and threaded side port. All sizes are hand blown from tubing to ensure uniform wall thickness. Side port is for insertion of thermometer or bleed tube having an O.D. between 5mm and 7.5mm.
-
SYNTHWARE Round Bottom Angled Four Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Flask, Two Neck, Angled Side Neck
Ace GlassTwo neck, one center and one angled side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.
-
Flask, Single Neck, Spherical, Receiving
Ace GlassWith short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall.
-
Round bottom, single neck flasks design for use with our 6810 series giant extractor apparatus.
-
Flask Boiling Flat Bottom 250ml
DWK Life Sciences (Kimble)KIMAX boiling flask with a short joint neck. Designed from ASTM Specification E1403, Type I, Class 4 requirements.
-
SYNTHWARE Round Bottom Flasks
Kemtech AmericaSYNTHWARE round bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.
-
SYNTHWARE Round Bottom Angled Three Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Round bottom flask with four necks arranged 3 in-line and one #7 Ace-Thred neck (ideal for suspending a thermometer or probe) at 90 degrees. The 500ml and 250ml sizes have angled side necks while the larger sizes feature vertical necks. Available in he
-
Flasks, PFA, Round Bottom, Single Neck
ChemglassAll PFA single neck round bottom flask with standard taper outer joint. Flask can withstand MAX temperature of 250°C and a MIN temperature of -200C.
-
These 250mL PYREX(r) low actinic flat bottom boiling flasks have full length outer 24/40 Standard Taper joints, but with shorter necks. Low actinic stained glass provides protection for materials sensitive to light. The protective color is an integral part of the flask, which retains the mechanical…
-
Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Please note: There are separate listings for different capacity single neck round bottom flasks.
-
These 22L PYREX(r) round bottom boiling flasks have short ring necks and take a No. 14 rubber stopper. These ring neck boiling flasks are precisely tooled for uniform stopper fit. The reinforced rim increases mechanical strength. These flasks are used in applications requiring rigid stoppering and…
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.
-
Florence Boiling Flasks
EiscoMade of high quality, heavy duty borosilicate glass Narrow neck, flat bottom, beaded rim Perfect for any science or home laboratory Florence boiling flask made out of high quality, heavy duty borosilicate glass. Narrow neck, beaded rim and flat bottom. No stopper included. Autoclavable, with…
-
Single Standard Taper Neck Heavy Wall Round Bottom Flasks
DWK Life Sciences (Kimble)Single neck flask with a Standard Taper outer joint Heavy wall Ref: ASTM Method D95 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Flasks, Flat Bottom, Long Necks
ChemglassSingle neck, flat bottom flask with a standard taper outer joint.
-
PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…
-
Flask, Three Necks, Angled
Ace GlassRound bottom flask, three necks with angled sides. All joints are standard taper. Available in standard and heavy wall.
-
Round Bottom Four-Neck Flasks
SP Wilmad-LabGlassAvailable in various sizes, these borosilicate glass round bottom flasks have four vertical necks - one center neck and three side necks which are 90° apart. All necks have Standard Taper outer joints.
-
SYNTHWARE Microscale Pear-Shape Flasks
Kemtech AmericaPear Shape Flask, Threaded, Synthware, Capacity: 5, 10, and 25mL available, Joint: 14/10, Supplied with one open top compressioncap and one size 014 Viton O-ring and one PTFE-faced septa.
-
-
ValueWare® Flat Bottom Flasks, Florence, Reinforced Beaded Top
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Class A Mixing Bulb Style Wide Mouth Flasks with Standard Taper Stoppers
DWK Life Sciences (Kimble)Wide mouths allow easy access into these mixing bulb volumetric flasks for applications such as dissolving tablets and other solids. Mixing bulb in neck accommodates approximately one tenth of the flask’s total volume and is designed to aid in dissolving or mixing the contents of the…
-
Round bottom, HEAVY WALL single short neck flask for use on rotary evaporators for receiving distillate. Joint at the top of the flask is a 35/25 socket. Plastic Coated to prevent injury from broken glass while preventing spillage of hazardous materials.
-