Boiling Flasks
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.
-
Round bottom, HEAVY WALL single short neck flask with a spherical socket joint. Flasks having a 35/20 socket joint are used as replacements for the collection flask on rotary evaporators.
-
Flask, Single Neck
Ace GlassRound bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.
-
PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…
-
Single Standard Taper Neck Heavy Wall Round Bottom Flasks
DWK Life Sciences (Kimble)Single neck flask with a Standard Taper outer joint Heavy wall Ref: ASTM Method D95 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
-
Flasks, Heavy Wall, Apollo, Single Neck
ChemglassHEAVY WALL single neck flask with a standard taper outer joint. Low profile design allows the flask to sit upright on the bench and also permits easy access of products with a spatula or policeman. The flask contour is excellent for controlled evaporation of foaming solvents during rotary evaporation.
-
Flask, Round bottom, Three Neck
Ace GlassRound bottom, three neck flask. Side necks are angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance. Microscale flasks, codes -34 & -36, feature 14/10, 20-400 externally threaded cap-seal joints supplied with 14.7-15mm holed caps, PTFE faced…
-
Single Neck Flat Bottom Flasks
ChemglassSingle neck, flat bottom flask with a standard taper outer joint.
-
Flat-Bottom Flasks
GSC International, Inc.These quality flat bottom boiling flasks are made from heat-resistant borosilicate glass, and have narrow mouths, tooled top finishes, and thick walls. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including lead, which are known to the State of California to…
-
SYNTHWARE Round Bottom Flasks with Spherical Socket Joints
Kemtech AmericaSYNTHWARE round bottom boiling flasks with spherical socket joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness. These flasks can be used as replacements for the collection flask on rotary evaporators.
-
-
Flask 1000 ml
CorningThis specially designed PYREX® 1L boiling flask is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C).
-
-
Borosilicate Glass Round Bottom Boiling Flasks with Ground Glass Joints
United Scientific SuppliesBoiling, round bottom flasks with ground glass joints. Our boiling flasks are made from low-expansion borosilicate glass. Feature uniform wall thickness for superior mechanical strength and shock resistance. Ideal for boiling, heating and mixing in the laboratory.
-
Round Bottom Boiling Flasks, SJ Joint, Heavy Wall, with Plastic Safety Coating
DWK Life Sciences (Kimble)KimCote® plastic-coated single neck flask with a SJ socket joint. Useful as rotary evaporator condensate collection flask or as a replacement for European designation KS 20/35.
-
Quartz single neck round bottom flask with standard taper outer joint.
-
Flasks, Quartz, Flat Bottom, Single Neck
ChemglassSingle neck, flat bottom, quartz flask with standard taper outer joint.
-
Round bottom, HEAVY WALL single long neck flask with a standard taper outer joint.
-
SYNTHWARE Round Bottom Flasks with Threaded Side Inlets
Kemtech AmericaSYNTHWARE round bottom, heavy wall, flask with standard taper outer joint and threaded side port. All sizes are hand blown from tubing to ensure uniform wall thickness. Side port is for insertion of thermometer or bleed tube having an O.D. between 5mm and 7.5mm.
-
Flask, Boiling, Round Bottom, 250ml
DWK Life Sciences (Kimble)KIMAX® round-bottomed boiling flask Reinforced tooled top Designed from ASTM Specification E1403, Type II, Class I, requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
These PYREX(r) pear-shaped boiling flasks have full length outer 24/40 Standard Taper joints and are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance.…
-
Flasks, PFA, Round Bottom, Single Neck
ChemglassAll PFA single neck round bottom flask with standard taper outer joint. Flask can withstand MAX temperature of 250°C and a MIN temperature of -200C.
-
Flask, Three Necks, Angled
Ace GlassRound bottom flask, three necks with angled sides. All joints are standard taper. Available in standard and heavy wall.
-
SYNTHWARE Round Bottom Flasks with Joint Hooks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, single neck flask with a standard taper outer joint. All sizes are hand blown from tubing to ensure uniform wall thickness. Flask has two hooks 180° apart for use with stainless steel joint springs.
-
Flask Boiling Flat Bottom 250ml
DWK Life Sciences (Kimble)KIMAX boiling flask with a short joint neck. Designed from ASTM Specification E1403, Type I, Class 4 requirements.
-
Florence Boiling Flasks
EiscoMade of high quality, heavy duty Borosilicate glass Narrow neck, flat bottom, beaded rim. Perfect for any science or home laboratory Florence boiling flask made out of high quality, heavy duty borosilicate glass. Narrow neck, beaded rim and flat bottom. No stopper included. …
-
Flask 50 ml
CorningThese 50mL PYREX® flat bottom boiling flasks have full length outer 24/40 Standard Taper joints, but with shorter necks. Adapter Nos. 8800, 8820 and 8825 are used to connect flasks with different size joints, thus allowing numerous combinations for diverse assemblies. Manufactured from…
-
Round bottom, HEAVY WALL single short neck flask for use on rotary evaporators for receiving distillate. Joint at the top of the flask is a 35/25 socket. Plastic Coated to prevent injury from broken glass while preventing spillage of hazardous materials.
-
Round bottom flask with five necks arranged 3 in-line, one standard taper front and one #7 Ace-Thred front (ideal for suspending a thermometer or probe). All necks are vertical. Available in heavy wall. Supplied complete with a 5029-10 nylon bushing an
-
PYREX VISTA flat bottom boiling flasks have full length outer 24/40 Standard Taper joints, but with shorter necks. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The flat bottom boiling flasks are designed to ASTM E-1403.
-
ValueWare® Flat Bottom Flasks, Florence, Reinforced Beaded Top
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…