Bags Products (199)

Polyester Three-Side-Seal Barrier Pouch Ampac's 400 Series SealPAK is a 2ply laminated structure consisting of polyester and polyethylene (PET/PE). These boilable and freezable pouches can sustain temperatures from -56 to 115°C (-70 to 240°F). 400 Series SealPAKs are 2.5 mils thick, and...

Polypropylene Autoclavable to 275°F Meets impact strength for all 50 states Meets tear strength for all 50 states Biohazard infectious waste is typically collected at the point of generation in such places as hospital laboratory and operating areas, pharmaceutical, biological, university and...

Disposable, transparent bags for liquid or solid samples Polyethylene Supplied sealed Top tears open easily along perforations. Mouth reinforced by a wired band with integrated loop tabs which serve as handles. Band holds bag open for easy filling. 6 oz. bag has 4 oz. fill line. Available with or...

Disposable, transparent bags for liquid or solid samples Polyethylene Supplied sealed Top tears open easily along perforations. Mouth reinforced by a wired band with integrated loop tabs which serve as handles. Band holds bag open for easy filling.  

The white, write-on strip makes sample identification easier and more convenient. It’s easy to write on this white strip using an ordinary ballpoint pen, pencil, or felt-tip marker. The paper-like finish virtually eliminates ink smearing, and provides a surface that will accept a variety of...

Sterile (gamma-irradiated) polyethylene bags 65µm thick for high-impact strength (9.2MPa tensile, 27.1MPa ultimate) even at low temperatures Permeability (g/m2/24 hr.): 1.2 water vapor, 12,000 oxygen, 2000 carbon dioxide Closure bags feature wire closure strip across bag top and rounded...

Bright red polypropylene bags include black biohazard symbol and precautionary procedures printed in four languages (English, Spanish, French, German) for added safety. Sterilization patch darkens when subjected to steam sterilization Hgh temperature steam autoclavable to 135°C (275°F) Pass...

Polyester Three-Side-Seal Barrier Pouch Ampac's 500 Series SealPAK is a 2ply laminated structure consisting of polyester and polyethylene (PET/PE). These boilable and freezable pouches can sustain temperatures from -56 to 115°C (-70 to 240°F). 500 Series SealPAKs are 4.5 mils thick, and...

Sterile polyethylene bags with sodium thiosulfate Disposable, transparent bags for water sampling With white marking strip and 4 oz. fill line Similar to 1303R20 bags except contain a nontoxic, non-nutritive tablet impregnated with 10 mg of sodium thiosulfate. For dechlorinating water samples in...

Econo-Guard polypropylene autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275F (135C). Imprinted with the standard biohazard symbol. Welded seams increase durability and protection. Bags feature an indicator that changes to read...

Economical and convenient, this benchtop disposal system is perfect for collecting pipette tips, microcentrifuge tubes, etc. during daily use. Rectangular steel wire frame holds a polyethylene bag 22 x 28cm (8-1/2 x 11");  coated in easy to clean, durable, orange color epoxy Snug fitting...

Can be used as a sickness bag Tie bag off at the ring to reduce contamination and smell Graduated markings to measure oz and cc/mL Single use Latex-free

Specifically designed for use with homogenizer blenders Easy and efficient sample testing Made from extra-heavy polyethylene Perforated polyethylene filter layer, sealed into perimeter of sides and bottom, allows sample to be placed into bag on either side. Liquid will transfer through the filter...

For personal or general lab use, sizes to suit all needs A range of biohazard collection bags printed with biohazard warning symbol and precautions in English, Spanish, and French Polypropylene Thickness: 1.57 mil Includes an indicator patch that darkens when autoclaved Autoclavable to 250°F...

Economical solution for autoclaving and safe disposal of biohazard wastes. Transparent polypropylene; 0.03mm (1.5 mil) thick Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance Tests High temperature autoclavable at a maximum of 135°C (275°F) Sterilization patch darkens when subjected...

Multi-Purpose Heat Sealer Ampac’s multi-purpose heat sealers are excellent for use with Ampac's 400 Series and 500 Series SealPAK, SilverPAK, StandPAK and SpeciPAK laminated pouches. Features: Air-tight, thermal seal, 5/8” wide Preset thermostat maintains sealing temperature of...