Moisture Determination Products (40)

Perfect for the low budget laboratory, this set consists of a HP23-AW portable indicator with 2 probe inputs, one HC2-AW probe for the measurement of product samples, accessories and a carrying case. Battery operated portable indicator with two probe inputs for two simultaneous measurements HC2-AW...

Unique dual LCD displays wall moisture and air temperature simultaneously Moisture content displayed on a relative scale Multi-position pins with safety storage of replaceable pins Easy to operate with selectable side switch (OFF, Test, and Calibrate) Data hold to freeze reading on display...

The DTM130 is a portable Temperature and Humidity Meter with large backlight LCD screen. Basic temperature measurements include ambient, dew-point and wet bulb. Relative humidity is also measured by the Meter. This DSM130 is ideal for both professionals and hobbyists. Measures: Ambient Temperature...

Capacity: 2.2 mL Standard Taper joint: 10/10 Sample is weighed, transferred to the flask and placed in a vacuum oven where the sample is dried at 60°C with a pressure of 5 mm or less of mercury for three hours. The percent loss is then calculated. Method is defined in Code of Federal Regulations...

Displays moisture content of wood, wood products, paper or other substances Range: 9.0 to 30.0% Resolution: 0.1%, accuracy ±4% NIST Traceable® Automatic and manual temperature compensation Jumbo sized digits (1 3/8” high) The meter’s memory contains nine material groups such as fiber...

This large dual graphical LCD displays moisture in wood and other building materials plus Air Temperature and Relative Humidity. Unique LCD with analog bargraph for simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture,...

Best performance for regulated industries Mettler Toledo has designed the HX204 Excellence Moisture Analyzer to meet the strict demands of research, quality control and production. With a resolution of 0.001%MC and excellent repeatability the HX204 meets the demands of applications requiring maximum...

Features: Quickly indicates the moisture content of materials with Pinless technology without damaging the surface; Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length) Manually store/recall up to 20 labeled readings Works on multiple wood types and...

8-in-1 Meter with Patented Built-in IR Thermometer Measure Humidity, Air Temperature (with built-in probe) plus non-contact InfraRed Temperature Pinless moisture sensor allows to monitor moisture in wood and other building materials with no surface damage Remote pin-type probe (MO290-P) for contact...

Used to determine the water content in petroleum and bituminous material. Similar to ASTM Type, except supplied with joints and stopcock to empty measuring tube during the determination. The 10 mL size is subdivided in 0.1mL from 0-1mL, 0.2mL from 1-10mL; 20mL size in 0.1mL from 0-1mL, 0.2mL from...

MR01 FLIR MR01 field replaceable temperature and relative humidity sensor for use with the FLIR MR77 pinless moisture meter. MR01-EXT Use the MR01-EXT for acclimation purposes, such as dryer/dehumidifier exhaust vents. Use the MR01-EXT to extend the reach of the integral temperature/RH sensor on...

A complete solution for the Restoration Contractor MO290 - Pinless Moisture Psychrometer + InfraRed Thermometer Monitor moisture in wood and building materials with virtually no surface damage Includes the following contact moisture reading probes: Pin Probe, Hammer Probe, Extension Probe and...

The MO50 is a compact pin moisture meter. MO50 displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete and mortar. This product is complete with pins (4), protective cap and 9V battery.

For solvents heavier than water. Used in the method of quantitative separation and determination of glycol mixture by azeotropic distillation described in Analytical Chemistry, Vol. 29, No.1, Page 100. Capacity is 121/2mL, graduated in 0.1mL. Joints are standard taper 24/40.

Quick Moisture Measurements on Wood and Building Materials Take quick Moisture measurements on wood and building materials with choice of pin or pinless (non-invasive) method. Easy-to-operate with display icons that indicate the levels of moisture content plus audible alert feature. Ideal for...

Suitable for ASTM D 95 and E 123. Subdivided 0.1mL to 2.0mL and 0.2mL above 2mL.