Conductivity Products (0)

Sixteen ounces of liquid for frequent calibration needs Highest accuracy available Units labeled (micromhos/millisiemens, ohms, parts per million/TDS) Includes step-by-step calibration instructions and temperature chart 100% compatible with all makes of equipment Calibration standards are traceable...

Traceable to NIST standards Accuracy: ±0.25% 100% compatible with all makes of equipment For use in the lab and the field Single-use standards eliminate concerns about external container contamination. Each container is labeled for calibrating conductivity (micromhos), resistivity (megohms)...

Calibrate your equipment for maximum accuracy Reagent-grade secondary standards Traceable to NIST standards 1,000, 10,000, 50,000 and 100,000 µmhos/cm Each bottle includes detailed instructions and a table of corrections at temperatures between 20 and 30°C. Packaged in glass quarts. The...

DuraProbe cells are designed for the highest accuracy under demanding field and plant conditions. This design compensates for electrode fouling, cable and connector resistance, and polarization errors. A choice of glass/platinum, epoxy/graphite, or stainless steel ensure compatibility with most...

Thomas No. 1203K02 Used with MultiLab product line Thomas No. 1203K03 Used with MultiLab product line Thomas No. 1203K04 Used with MultiLab product line Thomas No. 1203K05 YSI ProOBOD can be used with the MultiLab benchtop instrument for your BOD measurements. Extremely quiet operation....

The Thermo Scientific Orion Star A325 pH/ Conductivity Portable Meter is the top choice for advanced measurements on location. Get the information you need quickly and easily from the large, backlit graphic LCD display. Informative display shows individual pH/mV/RmV or...

The Thermo Scientific Orion Star A215 pH/ Conductivity Benchtop Meter is the ideal choice for any lab. Get the information you need quickly and easily from the large, backlit graphic LCD display. Informative display shows individual pH/mV/RmV or conductivity/TDS/salinity/ resistivity results with...

pH/ORP Sensor protective cap Memory for 20 readings Display prompts for simple pH calibration Temperature compensation This meter has a reading accuracy of ±1%, which has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORP sensor and powerful...

Autoranging Adjustable temperature control Powerful microprocessor-based surface-mount circuitry Memory for 20 readings Data back up system Low battery indicator Fast and accurate, the Ultrameter delivers performance of ±1% of reading. Factory calibrated with NIST traceable solutions, the...

Traceable® Pens for Conductivity, Dissolved Solids, and Salinity provides for conductivity, conductivity/total dissolved solids and salinity. Meters fulfill requirements for CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, ISO and Federal/State regulations. Waterproof...

Wide conductivity range For lab and field applications Rugged epoxy/graphite MiniDIN connector DuraProbe 4-electrode cells provide the highest accuracy for demanding laboratory or field applications. The 4-electrode design compensates for electrode fouling, cable and connector resistance,...

Potassium chloride solutions TDS values are based on a 0.7 conversion from conductivity. Solutions can be used to standardize conductivity meters.

The two electrode cells are able to measure low, standard and high conductivity samples depending on the cell constant. Cells with a 0.1cm -1 cell constant are ideal for low ionic strength solutions, deionized water, and ultra pure water. Glass/platinum cells are the best for chemically reactive...

The InLab® 605-ISM DO sensor incorporates polarographic dissolved oxygen determination technology. Produces high accuracy and reproducibility Designed for use with METTLER TOLEDO portable meter SevenGo Duo pro™ Membrane is protected by a steel mesh and the shaft is made out of resistant glass fiber...

The Pro2030 provides everything you need in a handheld dissolved oxygen meter that automatically compensates for changes in salinity values. Rugged, simple and reliable. Measure DO, salinity, conductivity, specific conductance, TDS, barometric pressure and temperature. EPA approved for drinking...