The IKA rectangular plastic bath is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures durability and long lasting usage. It is easy to handle and convenient to use.

Temperature controller ideal for two circuit mantles or general use. Features two front mounted outlets, 16 segment ramp and soak function, fuzzy logic auto tune PID, type 'J' thermocouple, dual 4 digit LED display, universal TC jack for "mini" or "standard" plugs. Unit is downsized, compact and…

This PTFE probe is an accessory for the Stuart Temperature Controller and is used for applications requiring a chemically resistant probe. One year warranty.

Product Highlights Compact, plug-and-play design Advanced PID control Simple three-key user control Type J or K thermocouple sensor input Key User Features Compact, plug and play design: 6.39”x9.48”x1.99” Simple three-key user control …

HI520 is an advanced process controller that can be configured for applications requiring monitoring and/or control of four main water-analysis parameters: pH, ORP, Conductivity, and Dissolved Oxygen. Waterproof IP65 (Nema 4X) enclosure Multi-color LED status indicators & audible…

Manually operated ball valve, complete opening, max. 6 bar Temperature range: - 20 °C -to +140 °C Connection: With union nut on one side for mounting on M16x1 thread. Second connection M16x1 male thread

Economical temperature controller for applications that do not require the precise temperature (± 0.1°). Auto tune PID process controller for use with Chemglass oil baths or mantles up to 5L. Controller has 1500 watts of power and will control temperatures to ± 1.0°C.

Julabo Pt100 sensors in stainless steel or PTFE coated stainless

Temperature monitor features a built in audible alarm, Type “T” or “K” thermocouple receptacle, and a bright LED display for easy viewing. The monitor is contained in a compact stainless steel cabinet with a side-mounted clamp for securing to a 1/2” diameter support…

Economy Model, compact, digital temperature controller. 16 segment ramp and soak, fuzzy logic, auto tune PID controller. One T, K, or J type sensor input. One 120V output. Temperature range varies by thermocouple type. Control accuracy -plus - minus 0.1 Degree C. Absolute accuracy of plus-minus…

Flexible, immersion or implantable microprobes, Type J, K, and T (for low temperatures). Three foot long wire lead, isolated electrically, is PTFE covered and can be assembled into septum, etc. using needle supplied. Maximum operating temperature of microprobe is 150 degree C .

Type K temperature probes provide economical measurement from -20 degrees C to 550 degrees C with more corrosion resistance than J type probes. Type T probes are commonly used for temperature ranges from -200 degrees C to 200 degrees C. Probes available with an inconel sheath or insulated wire.…

Type J temperature probes provide economical measurement from -20 degrees C to 550 degrees C. Probes available sheathed with stainless steel, inconel or simply insulated wire. Code -26 extension will allow the use of a controller up to 8 feet away. See code -27 for extra mini plugs.

PID controller for use with our CG-1100 oil baths. Controller has 1500 Watts of power and will control temperatures to ± 1.0°C. Supplied complete with CG-15001-25 Type "J" Thermocouple.

Compact recirculating chiller with powerful 400 W cooling capacity, designed for simple cooling tasks down to -10 °C. The RC 2 lite is the perfect peripheral device for the cooling of rotary evaporators, reflux condensers or as a cooling source for devices that dissipate heat with the help…

Ensures accurate temperature control 3-digit LED 1°C resolution Temperature range: -10 to 800°C Resistance thermometer probe senses the temperature of a medium that is being heated. Required temperatures are programmed into the unit using the directional…

Compact, lightweight time proportional digital controller²for use with type J temperature probes with a male SMP/OST²plug. Controller has two 120vac front outlets (1800 watts²total from either outlet or in combination) ideal for two²circuit heating mantles and one rear alarm outlet.…

The compact refrigerated and heating circulator HRC 2 control is renowned for its high energy efficiency, a working temperature range from -30°C to 100°C and a powerful and infinitely variable pressure and suction pump. The on-demand and speed-controlled compressor reduces noise and…

BriskHeat RTD Temperature sensor is a Class B PRTD 100 OHM encapsulated in stainless steel. The element is placed in the tip of the stainless-steel barrel, which is filled with potting compound rated for 200 deg C or higher. Outdoor rated sensor

The J-Kem® Scientific microprocessor based temperature controller is for use with the CG-1966 and CG-1967 pilot plant reactors. The Model 260 disconnects all output power if the process temperature exceeds the entered temperature by a user-specified amount, or following recovery from a power…

Product Highlights Easy-to-use digital controller with audible alarm Self contained, plug-and-play design Suitable for outdoor use (must be mounted vertically) Type K thermocouple input Specifications 120 or 240VAC 15 amps Digital On/Off controlling Units in…

Product Highlights Affordable and compact Compatible with a wide range of heaters andapplications Easy-to-use programmable digital controller, self contained, plug and play design Specifications Small Unit Size: 5.5 in L x 4.25 in W x 1.75 in H (140…

Mechanic fluid level controller for operating heating bath circulators or coolers on open baths 2 fittings for DN 12 hoses and lock nuts included

The VTF uses Fuzzy Logic technology and is suitable for many applications where precise thermoregulation is required. The instrument can be combined with the most common hot plate stirrers and is ready for use. A user-friendly probe positioning system allows the operator to adjust the position…

The HighTech Series of JULABO Heating Circulators provide a range of operating temperatures from -+20 °C to +300 °C. These temperature control units are suitable for temperature control of internal and external applications. Models include a 4-speed centrifugal pressure/suction pump…

Type “J” thermocouple (black) for use with oil baths or other liquid immersion applications. Thermocouple is supplied with a mini plug and a insulated and stainless steel overbraided cord. Thermocouples can be used to 370°C.

Pt100 (100ohm platinum wire resistance temperature detector) probes provide measurement over a temperature range of -20 degrees C to 550 degrees C. Less economical than J or K type probes, however they are not susceptible to drift, aging or corrosion. Supplied with male phone plug ends. Code -23…

BriskHeat’s SDX Digital PID Temperature Controller, is a cut above the competition. This affordable, compact benchtop controller is ideal in a laboratory environment. Its smaller size makes it easy to move and set up wherever it’s needed. Universal voltage from 100 – 240 VAC with…

Protect your process or equipment from excessive heat with a High Temperature Limit Controller. Provides high-limit cutoff protection for a wide range of applications Benchtop plug and play design for indoor use 5 ft Power cord and 10 ft temperature sensor included Includes…

Product Highlights Ideal thermostat for individual circuits requiring a weatherproof device Typical uses: Temperature control on heat tracing and process fluid system applications External alarm or an over temperature limit switch in conjunction with another control system …

Type J, 24 gauge iron constantan thermocouple wire, PTFE insulated with bare junction bead. Supplied in 1.8 meter lengths, longer lengths available. Ends are bare for hook-up. For general use, pyrometers, controllers, etc.

The J-KEM® Scientific HCC controller is designed to power large scale equipment such as 50L to 100L heating mantles. Designed with the same safety features as the Model 270, the HCC incorporates a 100 hour digital timer to turn heating on or off. PLEASE NOTE: THIS CONTROLLER REQUIRES ONE…