Thomas No. 1177M38 Impeller. Mixer. Blade. Crossed Blade. Radial Flow. High Speed. Low Viscosity. 316L SS. Electropolished. High Shear. High Vortexing. Thomas No. 1177M39 This radial flow impeller is effective for high speed, low viscosity mixing. The 50 mm (2”) diameter…

Portable light weight stirring. Ideal for field use where no electricity is available. It can be used for up to 24 hours of continuous operation; mixing up to 1 liter with a maximum stirring speed of 900 rpm. 9 1/4” x 5” x 3 1/2” H No cords Portable and lightweight for…

SIBATA 47mm Filtration Filter Holder Components are available as replacement components, or to create a customized filter holder. Available with fritted glass support base for general and biological applications, or with removable stainless steel screen support base and PTFE gasket for ultraclean…

Thomas No. 1198F59: for MST, MICROSTIRRER, AGE, MULTISTIRRER 15, AMI and AMI 4 Thomas No. 1198F60: for MST, MICROSTIRRER, AGE, ATE, MULTISTIRRER 6, MULTISTIRRER 15, AMI and AMI 4 Thomas No. 1198F61: for ATE only Thomas No. 1198F62: for ESP only

Powerful Magnetic Stirrers available in either four or nine position capacities provide precise speed control that deliver repeatable performance. Offered in both digital and non-digital models. Digital models have touchpad controls for input of speed & time. Non-digital models have an…

Tank clamp lets you mount a mixer head and a controller support (either model 04552-70 or 04552-75) directly onto an open top drum or container (maximum 1-1/2" [38 mm] wall thickness) Support stand has an electropolished cast steel base and 303 stainless steel support rod measuring 29"H x…

The unique design of our Tru-Stir™ stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical stainless steel spring permitting up to 1/4” of offset misalignment and…

An economical solution made for ultimate function The Mini Magnetic Stirrer by labForce® is an economical solution made for ultimate function with optimal magnetic coupling to ensure dependable stirring efficiency. A powerful magnetic coupling of the high-quality stir bar and the…

Blade is shaped to resemble the contour of a round bottom flask. Blades are available solid or perforated. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment.  Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in…

The MM-1000 is designed for stirring liquids up to 20 litres. It is a quiet and reliable mixer that provides stable continuous mixing for up to 7 days and features 3 types of motion: Rotational, Reciprocal and Vibration. It is an ideal instrument for biotechnology, organic synthesis, analytical…

Agitators are made entirely of PTFE and glass filled PTFE and are for use with 19mm or 25.4mm OD stirrer shaft CG-2097 and are available in 45°, 60° and 90° impeller angles. The 45° and 60° impellers are set up to stir downwards in a clockwise direction and upwards when rotated…

Powerful "rare earth" magnets stay coupled even under the most demanding stirring conditions Rugged ABS/Polycarbonate housing Vortex-Genie® heavy-duty motor Three different models May be used in cold rooms and incubators

PTFE stirring blades for use with our button type 9524 and 9527 stirring shafts. Blades are 41mm wide x 12mm high and are designed for use in flasks 250ml and less. Match blade to shaft OD.

Digital magnetic stirrer guaranteeing continuous operations both at low and high speed. Designed to meet the highest requirement with exclusive programming options and safety.

FLAKE-FREE Chemically Resistant Maximum 500 RPM; Vacuum (~5 Torr) and Pressure (~3 PSI) Polymer Blend Sleeve Provides Excellent Wear Resistance For Use with Polished Glass, PTFE or Stainless Steel Stirrer Shafts Universal Chem-Vac™ PTFE stirrer bearing provides a VACUUM TIGHT…

The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require…

Precision Trubore Stirrer Assembly consisting of 10 mm ID bearing, bushing, precision ground, button type glass shaft and blade. Available with either glass or PTFE stir blade.

PTFE covered stainless steel shaft with solid PTFE, 4 blade screw propeller. Blades are pitched 45 degrees. For a better grip by the stir motor chuck, 50mm of stainless is left exposed.

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment.  Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in…

Precision ground glass stirring shaft with attached vanes, 10mm. For use when agitation and gas introduction are desired at the same time. Agitator will fit through a 45/50 joint. Designed for use with our 9523 Trubore bearing and 9443 or 9446 mini-lab flask heads. Introduced gas exits the hollow…

Grease-Free PTFE stirrer bearing for use under moderate vacuum. The bearing consists of a PTFE standard taper body, Nylon compression cap, PTFE Insert/bushing and a Nylon loosening nut. The PTFE insert/bushing provides only glass and PTFE contact with the reaction. Loosening nut above the standard…

These Corning® PC-611 stirrers have an 11 x 11 inch plastic (ABS) top and can stir large volumes of liquid with ease. These stirrers are designed for 5 gallon vessels (19L), but can stir up to 10 gallons and can handle many applications that previously required an overhead stirrer. This powerful…

Continuous shearing and blending action mixes with introducing air Corrosion-resistant stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics,…

Trubore bearing with standard taper joint for use with our 9534, 9535 and 9541 precision ground stir shafts. Lubricant well at top will accept enough 8117 Stir-Lube to provide hours of operation at up to 1000 rpm. Match bearing ID with stir shaft OD.

Safe Operations Extremely resistant sealed case IP 54 Protection class is a guarantee of durability also when working in aggressive environment Full protection in case of overload, overtemperature and over current™ Lock key to prevent unintentional modification of the…

The Scilogex magnetic stirring bar with remover, sensor support rod and clamp as well as temperature sensor are suitable for use in research facilities and chemical laboratories. These products are made of materials which offer enhanced durability.

Shaft is precision ground and polished to fit our CG-2086 19mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120° apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR COUNTER-CLOCKWISE ROTATION. ALSO NOTE: 19MM…

The United Scientific™; Eco-Mix Vortex Mixer has a simple touch-and-go function that makes it easy to use. The compact design saves bench space, yet the mixer is powerful enough to deliver robust vortex mixing at 3000 rpm. Compatible with centrifuge tubes up to 50mL capacity, and can also be…

This incorporates a universal stirrer shaft coupling (CG-2046) to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Stainless steel stud and upper coupling attach directly to the motor shaft. For use with 30L…

OHAUS offers four models for stirring capacities between 25 to 200 L allowing you to choose the right model for your application. The broad top plate surface allows processing of oversized vessels such as carboys for your large volume stirring. The powerful magnetic drive is also capable of mixing…