The E6140.00 is a powerful benchtop orbital shaker, designed for rotary swirling action and used for the bioprocessing of plant cell cultures, mammalian cell culturing, aeration in fermentations, and various other chemical mixing procedures. Eberbach’s E6140.00 benchtop variable speed orbital…

The Bellco Digital Mini-Orbital Shaker is a high speed shaker for general laboratory cell culture experimentation. This Bellco design incorporates an orbital platform that accepts a variety of optional trays.  Peg and grommet design offers a simple method to install or change trays; four versions…

Interchangeable and Incubator Compatible Labnet's Revolver™ lab sample rotator accepts a variety of tube sizes and mixes them horizontally, vertically, or any position in between. Changing the mixing angle is easy simply turn the rotisserie. No tools are required. Complete…

These compact rockers are ideal where gentle mixing is required, either on the bench or in incubators. Choice of two models: Model SSM3 provides a 3D gyratory motion, ideal for low foaming agitation, DNA extractions, staining and de-staining procedures etc. The angle of tilt can be moved to…

The MultiTherm shaker is a temperature controlled vortexer, useful for a variety of molecular biology applications including: Denaturation of DNA, RNA and proteins Reverse Transcription Lipid extractions DNA/Plasmid Isolation Yeast and bacteria cultivation Restriction digests…

Eberbach’s benchtop variable speed orbital shaker comes standard with a stainless steel exterior finish and is designed to occupy a minimum tabletop space yet allow for the versatility offered by larger units with its increased load capacity (unit can accommodate loads up to 45 lbs). The…

The Orbital Shaker may be used for several applications including culturing microbes, washing blots, and general mixing. A spring platform is an available accessory which can handle multiple flasks. CTI’s SlientShaker® is designed and built for a heavy workload, and provides continues…

Suspends firmly sedimented or sticky pellets in seconds One-handed operation Unit holds microtube against a specially designed rotating agitator head. The unique action of the agitator head vibrates and swirls the tube contents. The unit is activated by light pressure applied to the top…

Choose from Four Models for Light Duty Shaking Light Duty Shakers are designed for applications with loads under 8 lb. Choose from two orbits and speed ranges to optimize your sample mix. Microprocessor-controlled and available as an analog model with basic speed control, two digital models…

The BenchRocker is designed to provide precise speeds and tilt angles for a broad range of molecular and biological mixing applications. The user has the ability to adjust parameters to match the vessel size as well as the volume of liquid being mixed, yielding optimum results. The rocking speed…

Optimal for mixing bottles, flasks and beakers due to the smooth horizontal motion. Orbital shakers move at a slow speed in a circular motion to slowly shake cultures, mix, and in a laboratory setting. Orbital shakers do not vibrate on countertops and do not produce heat, making them perfect…

The NS-11UA variable speed Nutating shaker/mixer is well suited for many routine laboratory applications including gentle mixing of western blots. Variable speed from 2 60rpm offers gentle continuous mixing of samples Low-profile, compact design enables placement at every workstation 12…

Small foot print, reciprocating/orbital shaker Smooth horizontal orbital motion for mixing in bottles, flasks, and beakers Soft start and noise-free operation Platform not included. See interchangeable platforms listed below Power Pack is CSA, UL, CE approved Can be used in an incubator 4°C to…

Designed for mixing samples in both a horizontal and vertical plane Compact design Wide selection of motions Noiseless operation Cold room compatible Dual format rotisseries Three easily interchangeable rotisseries Holds various size tubes: 36 x 1.5 / 2.0ml; 10 x 15ml/12…

Designed for accurate speed control to continuously mixing or pulsing samples Digital display of Speed and Time Continuous and Touch modes Speed range: 200 to 3000rpm Precise speed control: ±5% rpm Quick set up to Max rpm: 3 seconds 1500 rpm (Touch) 6 seconds 3000…

With an unprecedented 5 year limited warranty, Benchmark’s Everlast 247 Rocker is built to last. Twenty four hours a day, seven days a week . . . No problem! The powerful motor and heavy-duty drive system remain reliable and consistent, even under constant usage in a cold room (min. 0°C)…

The Bellco Bench-top Orbital Shakers are ideal for staining and washing electrophoresis gels or for any applications requiring mixing or agitation of solutions. They are engineered to operate between the limits of 30 and approximately 350 revolutions per minute, and to hold their speed at any…

Gyratory action for gentle, thorough mixing Small fooprint, 15 x 24cm platform (6.7 x 9.5 in) Safe for cold room use These mixers have 20° tilt angle for gentle, through mixing. The dimpled rubber mat is designed to hold centrifuge and blood collection tubes. Mixing speed is…

Thomas 1223R10: Fixed Speed Mini Tube Rocker The fixed speed mini tube rocker provides gentle mixing for evacuated blood collection tubes and other small samples. The unit is ideal for small laboratories. 35 Degree fixed tilt angle Fixed speed at 18 rpm’s Non-slip pad 2…

Used for Wrist Action® Shaker Models AA, BB, CC, DD, EE and FF

Wishbone Clamp, 8 L x 3 W x 3 in. H, 3 in. Depth, Silver/Red, Aluminum, 3-prong Vinyl-sleeved Grippers, Positioning Along the Shaft is Fully Adjustable to Accommodate a Variety of Vessel Sizes and Shapes.

Heats to 65°C and cools to 10°C below ambient LED displays for temperature, speed and time Calibration mode for temperature The OHAUS Incubating/Cooling Orbital Shaker is microplate ready without the need for any additional accessories. Optional modular blocks can accommodate…

The industry leading RocketBox 2.0 commercial pre-roll machine can fill and pack 453 pre-rolls per cycle and up to 25,000 a day! The RocketBox 2.0 joint machine is our fastest, most efficient, yet user-friendly pre-roll filling machine and will reduce your costs! The RocketBox 2.0's built-in,…

Labnet's ENDURO™ MiniMix nutating mixer combines the motions of an orbital shaker and a rocker to produce three dimensional action. The benefit of this type of motion is that it is both gentle and thorough. Designed for processing blots and staining gels Optimal fixed speed and…

Variable speed and temperature, heating and cooling thermoshaker with a choice of blocks for microtubes and microplates. a microtube and microplate thermoshaker a compact benchtop incubator Features: Fast heat-up and cooling times Temperature setting range +4°C…

The Orbital Shaker may be used for several applications including culturing microbes, washing blots, and general mixing. A spring platform is an available accessory which can handle multiple flasks. CTI's SilentShaker® is designed and built for a heavy workload, and continues shaking with…

CO2 Shaker CPS-20 provides regulated orbital motion of the platform and is designed for use specifically in CO2 incubators. CPS-20 is specifically designed for use in harsh environments such as CO2 and humidity and provides reproducible results for cell culture growth. A choice of 5 interchangeable…

The GENIE Temp-Shaker has a unique 3-way access clear dome chamber. Precise temperature control from 28°C to 75°C, for use in many laboratory applications. GENIE Temp-Shaker 100 provides gentle Orbital Shaking from 20 to 100 RPM. GENIE Temp-Shaker 300 with Universal…

360° orbital waving rotator for efficient sample mixing with accurate speed control and easy angle adjustment Product overview Digital display of Speed and Time Speed range: 5 – 120 rpm Easy adjustable rocking Angle: 1°- 12° …

The PHMT Series are compact, efficient and highly versatile thermoshakers, ideal for applications requiring microtube and microplate heating and shaking and suitable for use in cold rooms and incubators. It is effectively three instruments in one: a microtube and microplate…

Gentle motion, for gel applications Large platform, 14x12” Incubator and cold room safe The Orbi-Blotter ™ is the a low speed orbital shaker designed for gel blotting, staining/destaining and washing applications. With accurate speed control down to as little as three rpm.…

Mix test tube contents for optimum culture results with the gentle rotating motion of the Thermo Scientific™ Cel-Gro Tissue Culture Rotator, featuring a no-maintenance brushless motor. The single drum has an adjustable rotating angle and speed. Features: Rotator operates in…