SPE Columns
-
Discovery® DSC-Si SPE Tube
MilliporeSigmaRetention Mechanism: Normal phaseSample Matrix Compatibility: Organic solvents, oils, and lipids •Unbonded acid washed silica sorbent ideal for normal phase SPE and other modified flash techniques •Often used to separate or remove structurally similar molecules through successive elutions with…
-
CHROMABOND® Empty Columns
MACHEREY-NAGELFor individual packing of SPE columns with CHROMABOND® adsorbents.
-
Supelclean(TM) ENVI(TM)-18 SPE Tube
MilliporeSigmaRetention Mechanism: Reversed-phaseSample Matrix Compatibility: Aqueous solutions (drinking, ground, waste water) •Polymerically bonded, octadecyl (17% C), endcapped •Excellent for cleaning, extracting and concentrating pollutants from aqueous environmental samples •Higher 17% C loading for…
-
CHROMABOND® HR-X
MACHEREY-NAGELSpherical, hydrophobic polystyrene-divinylbenzene resin for SPE Features Hydrophobic polystyrene-divinylbenzene copolymer pH stability 1–14 High-purity material with highest reproducibility and lowest blank values due to an optimized manufacturing process Spherical particles…
-
Empore(TM) Sealing Tape for 96-well Plate
MilliporeSigmaEmpore membrane SPE technology comprises of SPE particles tightly enmeshed within a network of inert PTFE fibrils (90% SPE particles : 10% PTFE, by weight). The SPE-membrane fabrication process results in a highly dense and uniform extraction medium that offers distinct advantages over traditional…
-
SampliQ Silica C18 Endcapped SPE Cartridges
Agilent TechnologiesReversed Phase (Non-Polar) 25% carbon loading Silica-based particles reduce pressure drop and increase flow reproducibility Average particle size of 45 µm and pore diameter of 60 Angstrom to reduce pressure drop and increase flow reproducibility Agilent’s…
-
Supelclean(TM) LC-Si SPE Tube
MilliporeSigmaSupelclean(TM) LC-Si SPE Tube is used to adsorb moderately polar to polar compounds from nonaqueous samples. Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC
-
Populate base plate with only the wells needed 50 µL elution volume for minimal sample dilution and reduced evaporation time Optimized well geometry for 5 and 10 mg sorbent masses Use with vacuum or positive pressure The internal diameter, frit design, and sorbent material of…
-
Affinimip SPE is a selective solid phase extraction based upon molecularly printed polymers (MIP). It combines the advantages of Immune-affinity columns in terms of selectivity and a classic solid phase extraction (SPE) in terms of robustness and costs. This selectivity and robustness combines to…
-
-
CHROMABOND® Carbon A
MACHEREY-NAGELSpecial phase for SPE enrichment of acrylamide from water (DIN 38413-6) Features Base material: activated carbon, highly porous, spherical particles, specific surface >1000 m2/g Recommended application: Determination of acrylamide from water according to DIN 38413-6 Note:…
-
CHROMABOND® SiOH
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
Supelclean(TM) LC-Si SPE Tube
MilliporeSigmaSupelclean(TM) LC-Si SPE Tube is used to adsorb moderately polar to polar compounds from nonaqueous samples. Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC
-
CHROMABOND® CN
MACHEREY-NAGELCyanopropyl modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 cyanopropyl phase, carbon content 5.5 %, polar to mid-polar In addition to weak hydrophobic interactions…
-
CHROMABOND® Flash RS SPHERE SiOH Cartridges
MACHEREY-NAGELIdeal for Flash separations from 10 mg up to 300 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…
-
CHROMABOND® HR-P
MACHEREY-NAGELPolystyrene-divinylbenzene adsorbent resin for SPE Features Highly porous polystyrene-divinylbenzene copolymer specific surface 1200 m2/g, particle size 50–100 μm very high binding capacity, up to 30 % of adsorbent weight (for comparison: silica adsorbents about 3 %) …
-
Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids…
-
CHROMABOND® Easy
MACHEREY-NAGELPolar, bifunctionally modified polystyrene-divinylbenzene copolymer Features Polar modified polystyrene-divinylbenzene copolymer with a weak anion exchanger, specific surface 650–700 m2/g, particle size 80 µm, pore size 50 Å, pH stability 1–14 The Easy…
-
Affinimip SPE is a selective solid phase extraction based upon molecularly printed polymers (MIP). It combines the advantages of Immune-affinity columns in terms of selectivity and a classic solid phase extraction (SPE) in terms of robustness and costs. This selectivity and robustness combines to…
-
Supel(TM) QuE PSA/ENVI-Carb(TM) (EN) Cleanup Tube 2
MilliporeSigmaDispersive SPE (dSPE), often referred to as the "QuEChERS" method (Quick, Easy, Cheap, Effective, Rugged, and Safe), is modern sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. Using the QuEChERS method,…
-
CHROMABOND® Alox N
MACHEREY-NAGELAluminium oxide, neutral, for SPE Features Aluminium oxide, high purity, pore volume 0.90 mL/g, particle size 60–150 µm, specific surface 150 m2/g neutral, pH 7 ± 0.5
-
CHROMABOND® HR-XAW
MACHEREY-NAGELWeakly basic secondary and tertiary ammonium polymeric anion exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 55–65 Å, particle sizes 45 µm or 85 µm (standard) very large specific surface 850 m2/g, pore volume 1.2–1.4 cm3/g, pH…
-
CHROMABOND® PCA
MACHEREY-NAGELPropylcarboxylic acid modified silica cation exchanger for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 propylcarboxylic acid modified silica, weakly acidic cation exchanger (WCX) Recommended…
-
SampliQ Polymer WCX SPE Cartridges
Agilent TechnologiesWeak Cation Exchange Exhibits both cation exchange and reversed phase behavior Wide pH range: can be ionized or neutral depending on pH of buffer solution WCX resin retains basic/cationic, neutral and strong bases Agilent SampliQ WCX is designed to retain and release strong…
-
CHROMABOND® QuEChERS
MACHEREY-NAGELSpecial products for determination of pesticides in food samples QuEChERS method and pre-mixes Within a few years after its development by Anastassiades et al. the QuEChERS method has gained a leading position for the determination of pesticide residues in food samples by GC-MS or LC-MS,…
-
HybridSPE®-Phospholipid Cartridge
MilliporeSigmaHybridSPE-Phospholipid technology is a simple and generic sample prep platform designed for the gross level removal of endogenous protein and phospholipid interferences from biological plasma and serum prior to LC-MS or LC-MS/MS analysis. Biological plasma or serum is first subjected to protein…
-
Supelclean(TM) ENVI-Carb(TM) SPE Tube
MilliporeSigmaGraphitized Non-Porous Carbon Retention Mechanism: Reversed-phase Sample Matrix Compatibility: Aqueous solutions (drinking, ground, waste water) •Surface area: 100m2/g; Particle Sz.:120/400 mesh •Extreme affinity for organic polar and non-polar compounds from both non-polar and polar matrices…
-
CHROMABOND® C18
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
TELOS® neo™ PAX SPE Columns
KinesisMixed-mode strong anion exchange columns for acidic analyte extraction High surface area and capacity ensure highly reliable retention characteristics No secondary interactions from silanol groups for accurate results Higher sample loading due to high surface area Recover clean…
-
CHROMABOND® HR-XA
MACHEREY-NAGELStrong quat. ammonium modified polymeric anion exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 55–65 Å, particle sizes 45 µm or 85 µm (standard) very large specific surface 850 m2/g, pore volume 1.4 cm3/g, pH stability 1–14 …
-
CHROMABOND® Reservoir Columns
MACHEREY-NAGELReservoir columns for application of medium-size samples.
-
BAKERBOND spe™ Disposable Extraction Columns
Avantor - J.T.Baker®Baker Disposable, Pre-Packed Extraction Columns Polypropylene extraction columns prepacked with sorbent Packing is held between two 20 mm polyethylene frits Sorbent weight ranges from 100 to 1000 mg and column reservoir capacity is 1, 3 or 6 mL, as indicated in listings below …