SPE Columns
-
CHROMABOND® Na2SO4/Florisil® SPE Columns
MACHEREY-NAGELCombination phase for SPE of hydrocarbons from water acc. to DIN H53 / ISO DIS 9377-4 Features Special combination phase of sodium sulfate and Florisil® Recommended application: hydrocarbons from drinking, surface and waste waters
-
96-Well Protein Precipitation Filter Plate
MilliporeSigmaThe 96-well protein precipitation filter plate is ideal for removing precipitated proteins from biological plasma/serum. The plate consists of a 0.2 mum hydrophobic graded filter/frit. Biological plasma is first added to the 96-well plate followed by a protein precipitating agent (e.g.,…
-
Matrix properties- Higher content of chlorophyll and carotinoids (pigments), Recommended application(s)-PFAS in food (e.g. milk, curd cheese, quark, bread, brussel sprouts, spinach, eggs), QuEChERS, Sample preparation
-
CHROMABOND® Florisil®
MACHEREY-NAGELMagnesium silicate for SPE Features Matrix magnesium silicate (MgO – SiOH 15:85), high purity, particle size 150–250 µm Recommended application: organic tin compounds, aliphatic carboxylic acids, PCBs, PAHs
-
Supel(TM) QuE Citrate Extraction Tube
MilliporeSigmaDispersive SPE (dSPE), often referred to as the "QuEChERS" method (Quick, Easy, Cheap, Effective, Rugged, and Safe), is modern sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. Using the QuEChERS method,…
-
Supelclean(TM) LC-18 SPE Tube
MilliporeSigmaSolid phase extraction apparatus uses glass vials or tubes for sample collection and concentration. Some sorbents require large desorption volume than small SPE cartridges in such case SPE tubes were used. The barrels are compatible with most vacuum-manifold devices and allow accurate loading of…
-
CHROMABOND® QuEChERS
MACHEREY-NAGELSpecial products for determination of pesticides in food samples QuEChERS method and pre-mixes Within a few years after its development by Anastassiades et al. the QuEChERS method has gained a leading position for the determination of pesticide residues in food samples by GC-MS or LC-MS,…
-
BAKERBOND® Speedisk Extraction Columns
Avantor - J.T.Baker®With Speedisk columns, you can choose the column that works best with your sample size and performance requirements. Patented laminar configuration: reduces run time, increases capacity, eliminates filtration and evaporation steps Columns fit into all popular processors and racks …
-
CHROMABOND® HR-P
MACHEREY-NAGELPolystyrene-divinylbenzene adsorbent resin for SPE Features Highly porous polystyrene-divinylbenzene copolymer specific surface 1200 m2/g, particle size 50–100 μm very high binding capacity, up to 30 % of adsorbent weight (for comparison: silica adsorbents about 3 %) …
-
CHROMABOND® C18 Hydra
MACHEREY-NAGELOctadecyl modified silica phase for SPE of polar analytes Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 Special octadecyl phase for polar analytes, not endcapped, carbon content 15 % Recommended…
-
Supelclean(TM) LC-Si SPE Tube
MilliporeSigmaSupelclean(TM) LC-Si SPE tube is used to extract polar analytes from nonpolar samples. Application: Supelclean(TM) LC-Si SPE Tube may be used for the solid-phase extraction of: •Phospholipids in dairy products prior to their determination by high performance liquid chromatography-evaporative…
-
SampliQ Polymer SAX SPE Cartridges
Agilent TechnologiesEnsures fast, reliable extraction of anionic compounds Inert to a wide variety of solvents Stable for pH ranges 0 - 14 Water-wettable The Agilent SampliQ Strong Anion Exchange (SAX) polymeric resin is a mixed-mode, tertiary amine-modified divinyl benzene polymer that…
-
CHROMABOND® C18 ec
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
Discovery® DSC-18 SPE Tube
MilliporeSigmaRetention Mechanism: Reversed-phaseSample Matrix Compatibility: Aqueous solutions (biological fluids, water) •Polymerically bonded, octadecyl (18 %C), endcapped •Higher 18 %C loading for increased binding capacities and higher recoveries •The least selective phase: retains most organic analytes…
-
Polar sorbent, used primarily to adsorb analytes from non polar solvents like hydrocarbons, chloro- or flouro-substituted hydrocarbons or less polar esters and ethers.
-
Supel(TM) QuE Acetate Tube, AOAC® 2007.01
MilliporeSigmaDispersive SPE (dSPE), often referred to as the "QuEChERS" method (Quick, Easy, Cheap, Effective, Rugged, and Safe), is modern sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. Using the QuEChERS method,…
-
Female Luer Cap polypropylene
MilliporeSigmaUse to close Luer port. Polypropylene. Synonyms: Luer Plugs & Caps
-
Supelclean(TM) LC-18 SPE Tube bed
MilliporeSigmaSupelclean(TM) LC-18 SPE tube is used in the extraction of nonpolar to moderately polar analytes from aqueous samples. Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC
-
Supel(TM) QuE PSA Tube
MilliporeSigmaDispersive SPE (dSPE), often referred to as the "QuEChERS" method (Quick, Easy, Cheap, Effective, Rugged, and Safe), is modern sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. Using the QuEChERS method,…
-
Affinimip SPE is a selective solid phase extraction based upon molecularly printed polymers (MIP). It combines the advantages of Immune-affinity columns in terms of selectivity and a classic solid phase extraction (SPE) in terms of robustness and costs. This selectivity and robustness combines to…
-
SampliQ Silica Amino (NH2) SPE Cartridges
Agilent TechnologiesNormal Phase (Polar) Average particle size of 45 µm and pore diameter of 60 Angstrom to reduce pressure drop and increase flow reproducibility Agilent’s trifunctional bonding process provides more stability over monomeric bonding Manufactured to Agilent’s rigorous quality…
-
-
CHROMABOND® PSA
MACHEREY-NAGELPropylsulfonic acid modified silica cation exchanger for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 propylsulfonic acid modified silica very strong cation exchanger (capacity ~ 0.7 meq/g) …
-
CHROMABOND® Alox N
MACHEREY-NAGELAluminium oxide, neutral, for SPE Features Aluminium oxide, high purity, pore volume 0.90 mL/g, particle size 60–150 µm, specific surface 150 m2/g neutral, pH 7 ± 0.5
-
Sep-Pak Accell Plus CM Plus Light cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of…
-
Populate base plate with only the wells needed 50 µL elution volume for minimal sample dilution and reduced evaporation time Optimized well geometry for 5 and 10 mg sorbent masses Use with vacuum or positive pressure The internal diameter, frit design, and sorbent material of…
-
HybridSPE®-Phospholipid 96-Well Essentials Kit
MilliporeSigmaHybridSPE-Phospholipid technology is a simple and generic sample prep platform designed for the gross level removal of endogenous protein and phospholipid interferences from biological plasma and serum prior to LC-MS or LC-MS/MS analysis. Biological plasma or serum is first subjected to protein…
-
SampliQ Silica C18 Endcapped SPE Cartridges
Agilent TechnologiesReversed Phase (Non-Polar) 25% carbon loading Silica-based particles reduce pressure drop and increase flow reproducibility Average particle size of 45 µm and pore diameter of 60 Angstrom to reduce pressure drop and increase flow reproducibility Agilent’s…
-
CHROMABOND® C6H5
MACHEREY-NAGELPhenyl-modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 Phenyl phase, carbon content 8 %, polarity similar to C8 In addition to hydrophobic interactions more selective…
-
CHROMABOND® C8
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
Supelclean(TM) ENVI-Carb(TM) SPE Tube
MilliporeSigmaGraphitized Non-Porous Carbon Retention Mechanism: Reversed-phase Sample Matrix Compatibility: Aqueous solutions (drinking, ground, waste water) •Surface area: 100m2/g; Particle Sz.:120/400 mesh •Extreme affinity for organic polar and non-polar compounds from both non-polar and polar matrices…