Synonyms: glass adapter; glass adapters Legal Information: Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

The Agilent Technologies 675 uL inlet liner measuring 4 mm x 6.25 mm x 78.5 mm features a gooseneck design and facilitates direct injection. This liner ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility. It can be used…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Provides a convenient and safe method for shipping, storing, and dispensing research quantities of air-sensitive liquids or liquefied gases whose reactive nature or pressure precludes use of glass bottles. Because Sure/Pac cylinders are made of steel they are virtually unbreakable, and their wider…

Agilent fluorocarbon liner O-rings Liners are sealed in the inlet with O-rings or graphite seals Graphite seals are used when inlet temperatures exceed 350°C Fluorocarbon O-ring seals are easier to replace than graphite that deforms and flakes apart Pre-cleaned, then…

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

Two 12 gauge SS needles (6 and 18 in.) are connected to the CHEM-FLEX 106 tubing with nylon clamps. Liquids contact only PTFE and SS during transfers. For extra security when using large bore transfer needles, fasten septum to bottle or flask opening with a wrap-it tie.The nylon clamps are…

Small argon filter, charcoal, internally mounted, for detector gas line purge. This filters the purge gas going to the polychromator. Application: For Detector Gas Line Purge. This Filters the Purge Gas Going to the Polychromator This product is only available to U.S. Domestic Customers. …

The Agilent Technologies gas clean filter tube is suitable for use with chromatography system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent’s engineering and testing efforts focus on these parameters when designing liners for Agilent inlet systems. Intensive liner development and testing have resulted in a set of liners that are recommended whenever new methods are being developed, when methods are being optimized, or…

Topaz GC inlet liners feature revolutionary technology and inertness to deliver you the next level of True Blue Performance: Deactivation —unbelievably low breakdown for accurate and precise low-level GC analyses Reproducibility —unbeatable manufacturing controls and QC…

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

The Agilent Technologies inline regulator is suitable for use with SCD models. Application: For SCD This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies 870 uL universal inlet liner measuring 4 mm x 6.25 mm x 78.5 mm features a single taper design and facilitates split injection. This liner with a glass wool ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

The Agilent Technologies 800 uL inlet liner measuring 4 mm x 6.47 mm x 78.5 mm features a double taper design and facilitates split-less injection. This liner ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility. It can be…

Agilent inlet liners for third-party GC systems provide the optimum environment for samples to be vaporized and mixed with the carrier gas in the inlet system. Agilent inlet liners provide the perfect mix of liner configurations and chemistries to solve a wide range of application challenges when…

The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies gas clean purifier installation kit is suitable for use with TCD/ECD connecting unit in chromatography model. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The PerkinElmer sample pan is compatible to use with the TGA 7 and Pyris 1 TGA, sold as 4 per pack.

The S10L cartridges features a reversible design and is for analysts who prefer shorter dimensions and does not require an adaptor for sampling. The cartridge is eluted by connecting to a syringe barrel (empty SPE cartridge) that acts as a reservoir for gravity-fed elution solvent. Meets EPA TO-11A…

Rezorian cartridges are made from a low background polypropylene and feature a luer lock end-fitting. The luer lock enables the user to connect the cartridge to a pump tubing or use two cartridges in a series (piggyback), without an adaptor, to monitor breakthough or to increase sampling capacity. …

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

The Agilent Technologies split vent adapter is compatible to use with flow meters. Application: For Flow Meter This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies 900 uL inlet liner measuring 4 mm x 6.47 mm x 78.5 mm features a single taper design and facilitates split-less injection. This liner with a glass wool ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better…

Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.