Lab Condensers
Condensers are good for cooling vapor and condensing it back into a liquid form, recovering solutions by cooling and condensing the solvent vapors.
Temperature-controlled environments can maintain reactional temperatures and improve process control during applications where this is required.
At Thomas Scientific, we offer a range of condensers with various application suitability. All carry specially formed spiral tubes that provide a vapor path to ensure excellent heat transfer and anti-flooding features to ensure clear and precise results.
Multiple shape and sizing options are available, including a vertical condenser, detachable condenser, and a Friedrichs condenser, which makes them compatible with other laboratory equipment.
-
SYNTHWARE Grahm Condensers
Kemtech AmericaGraham Condenser Joints: 14/20, 19/22 and 24/40 available Jacket Length: 120, 200, 250, 300 and 400mm available Hose Connections: 8 or 10mm available **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**
-
No Hold Up condenser with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred inlet/outlet for connecting Ace-Safe hose connections with barb for 1/4" I.D. tubing. For replacement hose connections, see 5853. Complete item include
-
Condenser 200 mm
CorningThese PYREX® condensers have a high surface area per unit length of the 200mm long jacket with a 19/38 Standard Taper outer joint at the top and a plain drip tip at the bottom. They are primarily used in distillation assemblies Condenser tubulations are approximately 10mm O.D.
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
SYNTHWARE Allihn Condensers
Kemtech AmericaAllihn Condenser Jacket Length: 120, 200, 300 or 400mm available Joints: 14/20, 19/22 or 29/42 available Hose Connection OD: 8 or 10mm With outer joint at the top and inner joint at the bottom.
-
SYNTHWARE Liebig Condensers with Removable Hose Connections
Kemtech AmericaLiebig Condenser, Removable Hose Connections Jacket Length: 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22, and 24/40 available Hose Connection OD: 8mm With outer joint at the top and inner joint at the bottom.
-
Condenser, Cold Finger
Ace GlassCold Finger accessory for standard Allihn type condensers. This cold finger has a 24/40 inner joint that fits inside the condenser's upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 5943, 5945, and 5946 con
-
SYNTHWARE Diagonal Rotary Evaporator Condenser
Kemtech AmericaDouble coil condenser for use with Buchi rotary evaporators for cooling with tap water in a diagonal position. A 19/38 top valve. With 35/20 spherical ball joint.
-
Condenser, Coiled
Ace GlassCoiled condensing tube, with 24/40 inner and outer joint at bottom and top. Available in various lengths with hose barbs or Ace-Safe connectors.
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and joint at bottom and top. Jacket length 250mm. Available in various joint sizes with hose barbs or Ace-Safe connectors.
-
Condenser, Dewar
Ace GlassFor use with dry ice and other solid cooling agents. Can also be adapted for use as a small constant temperature bath by using a constant boiling liquid. In this manner, can also be used as an oil bath. The larger size will hold 100mL flask, small size
-
Condenser, Air Reflux
Ace GlassMicroscale air condenser normally used in reflux experiments. When packed with desiccant material, condenser becomes a drying tube. With inner joint at bottom, outer joint at top. Codes -10, -14 and -17 supplied with drip tip for use with 9595 Spinning Band Column. Effective length, approximately…
-
This specially designed PTFE condenser jacket is a replacement part for the PTFE Cyanide Distilling Apparatus (Thomas No. 0320A91)
-
Coil Condenser, "A" Assembly
ChemglassDouble coil condenser for use with rotary evaporators for cooling with tap water in a diagonal position. Condenser has a 50mm O.D. flange at the bottom, a 19/38 top valve, and removable hose connections using GL-14 glass threads. Condenser is supplied complete with plastic caps and serrated hose connections.
-
Condensers/Coolers, Rotary Evaporator
Ace GlassReplacement, borosilicate glass components for R220 rotary evaporators Product offering includes triple coil condensers, Bullfrog condensers and the lower condensate coolers for rotary evaporators. Available in either plain or safety coated versions. Units include black SVL caps & red GL thread…
-
Condenser, Cold Finger
Ace GlassCold Finger accessory for standard distilling heads and systems. This cold finger has an inner joint that fits inside the upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 6606, 6609, and 6613 distillation h
-
West Condensers
ChemglassNarrow annular space between jacket and inner tube of the West condenser provides for excellent cooling efficiency due to the increased flow rate of water. Condenser has a top standard taper outer joint and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Condenser, Coil Reflux, Microscale
Ace GlassHigh efficiency coil condenser especially suited for vacuum applications. Coil length is 70mm. With 14/10 inner and outer joints; outer joint is externally threaded to allow an O-RING-CAP-SEAL connection with mating inner joint. Supplied with cap and O-Ring.
-
Condenser, Dewar Type
Ace GlassDewar type condenser for use with dry ice or other solid cooling agents. Upper tube is 12mm O.D. At bottom is standard taper 24/40 inner joint.
-
Condenser, Spiral
Ace GlassWith spiral condensing tube having both inlet and outlet connections at top, on same side. With joints. Length between joints is approximately 80-90 mm longer than the stated coil length. Available with PTFE clad bottom joint.
-
Liebig Condensers
DWK Life Sciences (Kimble)Standard Taper outer joint at the top Standard Taper inner drip joint at the bottom Hose connections accept 3/8” ID flexible tubing Ref: ASTM Method D322 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Condenser, Liebig, No Hold Up
Ace GlassWith standard taper or spherical joint at bottom and top. Hose connections are size D.
-
Condenser, Triple Coil, High Capacity
Ace GlassHigh through-put, high capacity triple coil condenser has even higher capacity than double coil or rotary evaporator type condensers. Unit is designed with three internal coils for processing large volumes of cooling water and large volumes of material
-
Condenser Liebig Standard Joints
GSC International, Inc.Our Liebig Condensers are made from high-quality borosilicate glass and have a straight sealed inner tube and two inlet/outlet arms. These condensers have standard joints. We also sell Liebig condensers with rubber connections or ground glass joints . PRODUCT WARNINGS Our products…
-
SYNTHWARE Reflux Condensers with Angled Top Joints
Kemtech AmericaTop outer joint is angled 75 degrees to the condenser body. Coil section is 100mm in height.
-
Reaction Vessel
ChemglassOne-Piece Reaction Vessel, 5-Nk, 50mL: 19/22 Outer CN, (1) 10/18 Outer SN, (1) 14/20 Outer SN, and (2) 19/22 Outer SN's. Vessel is graduated from 10 to 50mL. Body outside diameter is 43mm. Equivalent to Mettler EasyMax 102/402 Part # 5116172.Mettler Easymax® is a registered trademark…
-
Condenser, West
Ace GlassNo Hold Up West condenser available with hose barbs or Ace-Safe connectors.
-
Condenser, Allihn
Ace GlassBulb type, approximately one bulb per 50mm, with water cooled standard taper 24/40 inner and outer joint at bottom and top.
-
The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.
-
Two piece cold trap style condenser for use with rotary evaporators. Condenser has a 50mm flange on the side, a 35/20 lower ball joint, a 19/38 stopcock plug and removable hose connections using GL-14 threads.
-
Allihn Condensers with Full Length Water-Cooled Joints
DWK Life Sciences (Kimble)For use in many refluxing operations, including Soxhlet extractions. Straight outlet tube at top Water-cooled Standard Taper inner drip joint at bottom Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
SYNTHWARE Mineral Oil Bubblers
Kemtech AmericaMineral Oil Bubbler, Body OD: 26mm,Overall Height: 185mm OR 500mm, Hose Connection: 10mm **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**