Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes.  The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs.  For use with rods up to 19mm diameter.

Boss head holds rods up to 15mm in diameter Adjustable jaws hold objects up to 90mm in width Cork lined jaws Perfect for test tubes, burettes, or flasks EISCO Clamp Retort, 4 Prong, Cork Lined with Boss Head (1) Clamp Four prong, die casted alloy clamp retort with cork lined jaws with…

LabJaws offers the largest selection of Lab-Frame Kits, Lab-Lifts, Rods and Support Stands in the industry to hold glassware safely. Whether you’re looking for a standard lab-frame or a customizable set-up, we have options to fit any space or application. Select from 13 pre-configured…

The SaniSure® Bio-Ease® HD clamp is designed for critical fluid applications where regulatory compliance, seal integrity, and repeatability are of the utmost importance. It is designed to handle higher pressures and be more secure than a standard pinch cl

With heavy, rectangular base of plate steel, finished in hard enamel Zinc-plated steel rod is machined at lower end with U.S. National coarse thread 508 mm rod is 9.5 mm in diameter with 3/8-16 thread; 610 and 914 mm, 13 mm in diameter with 1/2-13 thread 8835B50 support is furnished…

These Rod Clamps are otherwise known as the "muff" portion only and can be used to create custom clamps to satisfy a wide range clamping applications.

Graduations are always visible The clamps fit standard support rods, 12.5mm (1/2") and includes an adapter to fit to narrower 9.5mm (3/8") rods. Polypropylene is chemical resistant and autoclavable at 121°C (250°F).

The Universal H-Stand ensures stability and compatibility with all VELP Overhead Stirrers. It is possible to adjust the stand in order to adapt it to an uneven surface.

Features:  S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability.  Supports TWO Reactors side by side from 300mL to 5L.  Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically…

Clamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.

Laboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro

Flask clamps and universal platforms for shakers. Fits onto standard platforms. Purchase individual pieces to build various configurations. Specifications: 25x25cm Tray Accepts 9 51x51cm Tray Accepts 25

Clamp, Four Finger, Synthware, Accepts articles up to 80mm, Die cast alloy with Ni/Cr plated finish and cork lined interlocking jaws.

0209X58: Tubing Holder for Beakers This polypropylene plastic clip holds flexible tubing steady and fits securely onto the edge of beakers or pitchers up to 1/4" thick. 5.1cm (2") long arm has a hole to accept tubing up to 9.5mm (3/8") O.D. Autoclavable …

Bolt latch clamp secures the top of Scale-Up Series™ reaction flask to our stand.

Manufactured from steel wire and zinc plated, rings have an opening to permit items such as separatory funnels to be inserted without removing the support ring from the base. Available in three sizes.

Corrosion resistant. Has precise fit and powerful holding ability. Clamps at a 90 degree angle. Legal Information: LabJaws is a trademark of Henry Troemner LLC

Made of Delrin®, the clamp is non-corrosive and will not scratch glass. Can be used to 140°C. Color coded for easy identification. SOLD IN PACKAGES OF 10.

Shelf can be attached to any lattice setup using the supplied CG-9250-01 clamp holder. Shelf is 9" wide x 10" deep and anodized green with a neoprene surface to prevent items from slipping off. The 1/2" square support rod is 7.5" long. Square support rod prevents shelf from…

Lightweight rings mount funnels, boiling flasks, and other irregular shaped objects to lab-frames. Open ring section allows items to pass in and out of support area easily, reducing risk of breakage. Aluminum construction.

Aluminum alloy clamp Metal clamping screws Includes: (1) Boss head For use with laboratory stands, this popular boss head is made of die casted alloy with a powder coat finish. It accepts rods at a right angle to one another. Metal thumbscrews allow for adjustment.  

These stands have nickel-plated rods, and heavy, corrosion-resistant bases for stability. They come as a set with support rings included. Stamped Steel Base #4-SSS66-R2 : Base [4" x 6"], Rod [18" x 5/16"], 2 Rings [diameter 3", 4"] #4-SSS67-R3 :…

Support rings with clamp, cast iron.

Solid ring with built in clamp for attachment directly to support rod. Available in three sizes. Nickel plated zinc alloy.

150°C Max. Temp. Limit for Filter Base. 

Heavy Duty Bosshead, Chrome Plated, Fits Rods up to 20mm Diameter Heavy duty bosshead Die casted alloy with chrome plated  or black finish Accepts rods measuring up to 20mm in diameter Large thumb screws and grooved knobs for easy adjustments (1) Boss head This…

Model 712 is a rugged cast aluminum clamp that safety secures gas cylinders to benches, tables, or other flat surfaces up to 2.5" (64mm) thick. The 1" (25mm) wide, 54" (1372mm) long nylon strap features a nickel-plated, non-slip spring catch and buckle for easy adjustment around…

Compact Size Saves Bench Space This non-corrosive support stand with stainless steel mounting rod provides modern advantages over metal ring stands. The compact polypropylene base has a smooth surface making cleaning easy, and measures 21 x 16cm (8-1/4 x 6-1/4”) x 4.5cmH (1-3/4”). At a weight…

Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

Stainless steel electro-polished finish or nickel-plated zinc Large grip adjustment range 2-prong construction Single or dual adjust Designed to securely hold laboratory glassware and apparatus. Extension arm attaches clamp head securely and offers easy positioning in the deepest…

This deluxe set includes a support stand (5” x 8”) with support rod (20”), support ring (3”), a 2-prong extension clamp with cork lined jaws and a clamp holder. The support rod includes a 3” long rod to provide more torque when securing the rod to the base plate.

Made from high grade Zinc Alloy, finished in a non-toxic powder coating. Two wide pad metal screws make it easier to securely fasten the bosshead to the support apparatus and clamp. Able to hold rods up to 16 mm in diameter. Holds rods orthogonal (90 degrees) to one another. Eisco Labs proudly…