Ideal for rooms with ceilings under eight feet or shallow counter tops
- 3/16" tempered safety glass counterbalanced sash
- 10" diameter duct collar
- Powder-coated 16 gauge steel liner and exterior
Hoods include a removable front panel, a removable air foil, a two-piece adjustable baffle, a vapor-proof 100-watt incandescent light, switches for light and blower. The right side panel is factory prepared for up to three service fixtures, one duplex receptacle and one airflow monitor (see ordering info below). The right interior wall is factory prepared for one cupsink and turret (see ordering info below). Requires work surface, base cabinet or stand, ductwork and remote blower (except for Hoods with Blower Modules).
Basic 47 Hoods can be used as an individual work stations. Hoods with blower module are capable of overcoming a maximum external static pressure of .25" H2O at 720 CFM (100 fpm). Static pressure loss does not exceed .35" H2O at 100 fpm (720 CFM) for hoods without blower module. Dimensions: 47" W x 25" D x 53" H.
Basic 70 Hoods (5165H05) are spacious enough to accommodate numerous samples or for two people to work simultaneously. Basic 70 Hoods with Blower Module are capable of overcoming a maximum external static pressure of .23" H2O at 1120 CFM (100 fpm). Static pressure loss does not exceed .57" H2O at 100 fpm (1120 CFM) for hoods without blower module. Dimensions: 70" W x 25" D x 53" H.
A water gauge is used for static pressure measurements. Four inches of water is approximately equal to one inch of mercury.
Labconco XPress Laboratory Equipment
Thomas number 5165H01 is part of Labconco's XPress Laboratory Equipment Program. These items are in stock at Labconco for quick shipment. They ship in 48 hours or less! For more information and a complete listing of Labconco products available through this program, download the brochure in the Additional Info tab.