Lab Wash Bottles
-
Pack of six Distilled Water wash bottles, 1000ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping. Transparent screw cap for easy identification Easy to control…
-
Wide Mouth Unitary Wash Bottles
Thermo Scientific NalgeneDesign eliminates contamination and mismatching of delivery spouts when refilling bottles Made of lower density polyethylene with wide mouth and polypropylene screw cap Delivery tube is molded into bottle wall with inlet at lower-most position in bottle Spout emerges from shoulder rather than…
-
Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…
-
Thomas Wide Mouth Wash Bottles
labForce® (powered by Thomas Scientific)Assortment Pack- Thomas® Exclusive Economical Color-coded: 5 colors No need to buy large quantities 3 sizes: 125, 250 and 500 ml Versatile There’s no need to buy packages of multiple color wash bottles just to get one of each color. These low density polyethylene wash bottles are…
-
LDPE Wash Bottles
United Scientific SuppliesThese bottles are made of translucent and low density polyethylene (LDPE). Solutions can be dispensed easily by lightly squeezing the bottle. The flexible polyethylene delivery tube can be directed wherever required.
-
-
Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…
-
Six pack Wash Bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Self venting design Made of low density polyethylene Color coded screw cap for easy identification (4 colors) Performance plastic with flex ink. Ink won't fade,…
-
Meet the latest requirements of GHS & OSHA HAZCOM 29 CFR 1910.1200 for workplace labels Safety vented Patented DripLok® valve prevents dangerous solvent drips The specially designed jet-tip provides precise dispensing control
-
Red Wash Bottles
SP Bel-ArtHigh visibility, red color helps to alert user of hazardous contents. Low density, polyethylene with polypropylene closure.
-
500ML Pack of 2 500ml ethanol wash bottles made of low density polyethylene (LDPE) WIDE MOUTH Feature a wide mouth for easy filling and a white color-coded screw cap for easy identification SELF VENTING Designed to be self venting to eliminate leaks and dripping EASY TO READ Labels…
-
500ML Pack of 6 500ml acetone wash bottles made of low density polyethylene (LDPE) WIDE MOUTH Feature a wide mouth for easy filling and a red color-coded screw cap for easy identification SELF VENTING Designed to be self venting to eliminate leaks and dripping EASY TO READ Labels…
-
Right-to-Understand FEP Safety Wash Bottles
Thermo Scientific NalgenePrevent chemical accidents in the lab with Nalgene™ Right-to-Understand FEP Wash Bottles. Bottles are permanently etched with chemical identification and safe handling information following the Globally Harmonized System (GHS) specifications as applicable to secondary laboratory containers.…
-
Pack of two Isopropanol wash bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (1 color) Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Made of low density polyethylene (LDPE) Yellow color coded screw cap for…
-
Two pack Wash Bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Self venting design Made of low density polyethylene Color coded screw cap for easy identification (4 colors) Pack of two chemical wash bottles made with Eisco Labs…
-
Wash Bottle, 500 mL
Saint GobainDelivery tube is removable from cap Of translucent Teflon ® FEP especially suited for trace metal work
-
Wash Bottles, LDPE
DynalonEasy-squeeze 250ml and 500ml wash bottles with integrally molded tube. Requires only gentle pressure to eject and accurately direct the liquid. The dispensing tip can be cut back to increase the flow rate. Maximum temperature of LDPE is 80°C.
-
Thomas® Exclusive- 5 Pack Economical No need to buy large quantities Color-coded: 5 colors 250 and 500 mL No need to buy 5 or 6 of each color to get a selection of colors. These low density polyethylene wash bottles are versatile and easy to use. The color-coded…
-
Six pack Wash Bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (2 colors) Self venting design Made of low density polyethylene Color coded screw cap, nozzle & chemical information for easy identification Pack of six chemical wash bottles…
-
Color-Coded Unitary Wash Bottle
Thermo Scientific NalgeneWide mouth for easy filling Holds up to 500 mL of liquid Convenient, built-in dispenser won't get lost or contaminated when refilling. Comes as pre-packaged, color-coded assortment with one each: red, blue, white and yellow caps. Custom right-to-know labels included.
-
Wash Bottles
DynalonThese stylish sloped shoulder wash bottles feature an acute angled "swan neck" dispensing spout. Maximum temperature of low-density polyethylene is 80°C. Washbottle 250 ML Water (1210A92 ) Product Dimensions (l x w x h) : 0x2.153x8.625in Printed with a water…
-
Solvent Wash Bottles
Thermo Scientific NalgeneExcellent for use at industrial facilities, environmental, electronic, university and government research facilities and testing labs Nalge 2421 Leakproof; usable temperature 0° to 90°C Wide-mouth, molded in fluorinated polypropylene with fluorinated HDPE closure, stem and tube Silk-screened…
-
500ml capacity Easy to read labeling, including chemical information and safety warnings (4 colors) Self venting design Made of low density polyethylene Color coded screw cap for easy identification (4 colors) Performance plastic with flex ink. Ink won't fade, crack or peel.…
-
Unlabeled chemical wash bottle, 250ml capacity Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Easy to control squeeze for dispensing Performance Plastics by Eisco Labs Superior quality low density polyethylene (LDPE) construction with long lasting strength.…
-
Wide Mouth Wash Bottles
SP Bel-ArtLow-density polyethylene wash bottles have color-coded polypropylene closures for easy identification and wide mouths for easy filling. Choose from: Natural, Red, Yellow, Blue, and Green in 250, 500 or 1,000mL Natural also available in 125mL
-
Six pack Wash Bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (2 colors) Self venting design Made of low density polyethylene Color coded screw cap, nozzle & chemical information for easy identification Pack of six chemical wash bottles…
-
labForce® Wash Bottles
labForce® (powered by Thomas Scientific)labForce® vented wash bottles are made from industrial grade low-density polyethylene with polypropylene stem closure and venting assembly. They are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards,…
-
POLYETHYLENE PLASTIC 500ml wash bottle made of flexible, premium quality polyethylene plastic INDUSTRIAL QUALITY High chemical durability & moderate heat tolerance. Can withstand temperatures between -50°C and 80°C. Good resistance to acids, alcohols and bases FLEXIBLE DELIVERY TUBE Wash…
-
Pack of two unlabeled chemical wash bottles, 250ml capacity each Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Easy to control squeeze for dispensing Performance Plastics by Eisco Labs Superior quality low density polyethylene (LDPE) construction with long…
-
Wide Mouth Unitary Safety Wash Bottles
Thermo Scientific NalgeneBottle is safety red for easy identification of special contents Low-density polyethylene For use with acids, alcohols and bases Tubulation and bottle are molded in one-piece to prevent contamination Wide mouth design for faster, easier filling Linerless, 38 mm polypropylene closure Bottle…