Traps Products (0)

Compare Tool

Select up to 3 products

  • Thumbnail Image for Big Universal Traps

    Agilent Technologies

    Big Universal Traps utilize a layered, multi-adsorbent bed packing of the most effective, highest capacity adsorbent materials available today for the removal of oxygen, moisture, hydrocarbons, carbon dioxide and carbon monoxide from helium gas streams. The volume of the various adsorbent materials...

  • Thumbnail Image for Two-Piece Vacuum Traps with Hose Connection

    Wilmad LabGlass

    These borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.

  • Thumbnail Image for Bubbler Mineral Oil

    DWK Life Sciences (Kimble)

    Used with mineral oil to observe gaseous addition to reactions. May be used to vent a reaction mixture to the atmosphere. Tubing connections are 8 mm O.D. and may be used with 179730-0808 or 179920-0808 to join multiple bubblers if necessary.

  • Thumbnail Image for Complete Vacuum Traps with 3/8" Hose Connections

    Wilmad LabGlass

    Widely used to protect vacuum pumps from contamination, these borosilicate glass vacuum traps are a one piece unit with two 3/8" hose connectors. Connectors are 180° apart to ease connection of heavy wall rubber tubing used in basic vacuum set-ups. These traps are frequently used with...

  • Thumbnail Image for Vacuum Trap Size 21

    DWK Life Sciences (Kimble)

    Connections are 180º apart for easy installation into a variety of vacuum systems. Protects the mechanical pump from attack by corrosive vapors which can be condensed by using liquid nitrogen or dry ice/slurry mixtures.

  • Thumbnail Image for Bidwell-Sterling Moisture Traps

    Wilmad LabGlass

    Made of borosilicate glass, these Bidwell-Sterling moisture traps are calibrated "to contain" (TC) at 20°C and are used for determining moisture in samples by distilling with an immiscible liquid. Consist of vapor tube, return tube, round bottom graduated tube, and Standard Taper 24/40...

  • Thumbnail Image for Fritted Bump Trap for a Rotary Evaporator

    DWK Life Sciences (Kimble)

    This trap has a 40-60 micron porosity fritted disc sealed between the lower inner and top outer joint to prevent the contents of the flask from entering into the condenser in the event of bumping. All traps have a Standard Taper 24/40 top outer joint Manufactured from 33 expansion, low extractable...

  • Thumbnail Image for Vacuum Trap Com Size 21

    DWK Life Sciences (Kimble)

    Outlets are 180º apart for easy installation into a variety of vacuum systems. Protects the mechanical pump from attack by corrosive vapors which can be condensed by using liquid nitrogen or dry ice/slurry mixtures. Two-piece construction allows removal of condensate.

  • Placeholder Image for Pen Blue Pk5

    Graphic Controls
  • Thumbnail Image for Two-Piece Vacuum Traps with Straight Top Stem

    Wilmad LabGlass

    Made of borosilicate glass, these vacuum traps consist of two pieces with a straight top stem. Both inlet and outlet stems are integral with the stopper. Body and stopper are connected by a full length Standard Taper joint.

  • Placeholder Image for Dry Ice Condenser-Trap, with Ace-Threds

    Ace Glass

    Twin chambered dry ice condenser-trap,for Rotary Evaporator use. Squatty design 18"high, two chambers. Dry ice fingers secured in main body via #50 Ace-Thred, bushings, and O-Rings allowing for easy cleaning. Two ports at top of chamber are 3/8" O.D. (for connecting to evaporator & vacuum source)....

  • Thumbnail Image for Freezing Section, 29/42

    Thomas®

    Prevents corrosion by acid and alkaline vapors, moisture, etc., entrained during evacuation of distilling apparatus, vacuum desiccators, etc. Freezing trap, when immersed in suitable freezing mixture, removes condensable vapors, gauge liquid or other foreign material accidentally introduced into the...

  • Thumbnail Image for Scienceware® Vacuum Traps

    Bel-Art Products

    Vacuum trap and cap are made from corrosion and chemical-resistant polypropylene to provide ideal protection of vacuum sources from contaminants. Tube volume is 100mL; measures 32 x 160mm L Pressure-fittting cap features an inlet and outlet to fit 7.9mm (5/16") ID tubing Autoclave-safe at...

  • Thumbnail Image for PYREX® Replacement Trap

    Corning

    This specially designed PYREX® trap is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C) Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation and absorbed in a...

  • Thumbnail Image for Purge/Trap K Vocarb® 3000

    MilliporeSigma

    Configured for Tekmar LSC-1, LSC-2, LSC-2000, 4000a

  • Thumbnail Image for SYNTHWARE Large Volume Vacuum Traps

    Kemtech America

    Vacuum Trap, Large Volume Capacity: 500 and 1000mL available.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.