Standards Products (0)

Compare Tool

Select up to 3 products

  • Thumbnail Image for General Purpose Viscosity Standards

    Cannon Instrument

    Based on NIST value of 1.0016 centipoise for water at 20C; conforms to ASTM Standards D 445, D 88 and D 2161; traceable to NIST Approximate viscosities at varying temperatures in centistokes and centipoises are given in Table 1; each standard is furnished with actual viscosity and density values....

  • Thumbnail Image for General Purpose Low Temperature Viscosity Standards

    Cannon Instrument

    CANNON Low Temperature Viscosity Standards verify viscometer performance at sub-zero temperatures. These standards are applicable to SAE Specification J300 as well as a variety of ASTM Methods including: ASTM D2983, Low-Temperature Viscosity of Lubricants Measured by Brookfi eld Viscometer ASTM...

  • Thumbnail Image for Silicone Viscosity Standards

    Cannon Instrument

    For calibration of rotational viscometers Viscosity certified at 20, 23, 24, 25, 26 and 27°C Calibrated to a precision of ±0.2% NIST traceable Standards are based on the National Institute of Standards and Technology (NIST) value of 1.0016 mPa-s (centipoise) for water at 20°C...

  • Thumbnail Image for High Viscosity Standards

    Cannon Instrument

    For determining viscosities in asphalt and polymers (see ASTM D 2170 and D 2171) Traceable NIST For Kinematic Viscosity Values (cSt), please contact Thomas Scientific

  • Thumbnail Image for UV-Vis Standards And Reagents

    Agilent Technologies

    In recent years, quality requirements as outlined by ISO 9000, GLP, GMP and NAMAS have assumed increasing importance. As a consequence, the recommendations of pharmacopoeias have become more influential in the pharmaceutical industry. Formal performance verification of UV-Visible spectrophotometers...

  • Thumbnail Image for Silicone Rotational Viscosity Standards

    Fungilab

    Fungilab's silicone rotational viscosity standards are essential for the calibration of rotational viscometers. Silicone standards are ISO 17025 / ISO Guide 34 certified and are ready to use in convenient 600mL packs, eliminating the need to transfer sample fluids to a test beaker. Fungilab's...

  • Thumbnail Image for Ink and Paint Viscosity Standards

    Cannon Instrument

    For ink and paint viscometers For use with Zahn, Shell and Ford viscometer cups. Based on NIST value of 1.0016 centipoise for water at 20°C. Traceable to NIST. Approximate kinematic viscosity and drain times for the various cups at 25°C are given in table. Actual values are furnished with...

  • Thumbnail Image for Gas Analyzer Standards And Accessories

    Agilent Technologies

    Gas Analyzer Standard Kits (2714T95 to T97) Calibration kits contain one box of 2 calibration mix cylinders, 2 regulators, 2 pieces of stainless steel 1/16 in. gas sampling tubing, and 1 carry case, all packaged separately. Gas Analyzer Standard Cylinders (2714T90 to T94) Cylinder specifications:...

  • Thumbnail Image for Cold Cranking Simulator Viscosity Standards

    Cannon Instrument

    Conform to SAE specification J300 and ASTM D 5293 Viscosities based on NIST value of 1.0016 centipoise for water at 20°C Traceable to NIST Supplied in one pint bottles

  • Thumbnail Image for Viscosity Standards

    Fungilab

    Viscosity standards are ideal for the calibration of dynamic and kinematic viscosity instrumentation. Standards are supplied at 500mL and must be used with a supplementary beaker. All viscosity standards are delivered with a certificate of analysis and are ISO 17025 / ISO Guide 34 certified....

  • Thumbnail Image for 2mL Empty Columns

    Eichrom

    The same columns used for our standard 2mL pre-packed columns, these polypropylene columns have an inner diameter of 0.8cm and a snap off tip. Use when a slightly different sized column is required for the analysis. The columns are supplied in packages of 100, with 100 caps, bottom frit inserted and...

  • Placeholder Image for Cold-Cranking Simulator Standards

    Cannon Instrument

    CANNON CL Standards provide certified dynamic viscosity data (in cP or mPa·s) at temperatures from –5°C to –35°C. These standards are used to calibrate the CANNON Cold-Cranking Simulator (CCS) oil testing (see ASTM D 5293 and SAE Specification J300).

  • Placeholder Image for Sr Resin

    Eichrom

    The extractant system in Eichrom's Sr Resin is 1.0M 4,4'(5')-di-t-butylcyclohexano 18-crown-6 (crown ether) in 1-octanol.A 40% (w/w) loading of this organic solution is loaded onto an inert chromatographic support. The bed density of Sr Resin is approximately 0.35 g/mL.

  • Thumbnail Image for Wooden Slide Cabinets

    Eberbach

    Unit System Of substantial oak, with 100 stamped aluminum trays, each compartment to hold 20 slides size 3” x 1” or 75 x 25 mm Supports slides horizontally, so that they are entirely visible and can be dried in storage position to lessen handling. Total capacity, 2, 000 slides. Tray is...

  • Placeholder Image for TRU Resin

    Eichrom

    Eichrom's TRU Resin is an extraction chromatographic material in which the extractant system is octylphenyl-N,N-di-isobutyl carbamoylphosphine oxide (abbreviated CMPO) dissolved in tri-n-butyl phosphate (TBP). The bed density of TRU Resin is approximately 0.37 g/mL, with a working capacity of 2 mg...

  • Placeholder Image for 20mL Empty Columns

    Eichrom

    These columns, nominally 20mL, have an inner diameter of 1.5 cm and a "packable" volume of 17mL. Use them when a large bed volume of one of Eichrom's extraction chromatography or ion exchange resins is required. Columns are supplied with bottom frit pre-inserted, in packages of 20,...

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.