Lab Separatory Funnel
-
Funnel 500 ml Cs4
CorningThese 500mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, have a micro-finish No. 4 Product Standard Polytetrafluorethylene (PTFE) stopcock and a strong, lightweight No. 27 Standard Taper glass stopper. The PTFE plug fits into the micro-finish barrel …
-
Funnel 125 ml
CorningThese 125mL PYREX® glass separatory funnels have Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcocks and inner and outer 19/22 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For replacement…
-
Separatory Funnels, Squibb, Pear-Shaped, Standard Taper Stopper, with Totally…
DWK Life Sciences (Kimble)KimCote® plastic-coated funnel is supplied with a standard taper ground glass stopper and a totally autoclavable PTFE stopcock plug. Lower stems have an I.D. large enough so that a column of liquid will "break" with the stopcock closed, thereby giving a more complete separation and eliminating the…
-
These PYREX® glass separatory funnels have Rotaflo® stopcocks and strong, hollow Standard Taper glass stoppers. A glass stopper is also included for your convenience. Stem O.D. is 10mm. For replacement glass stoppers, see No. 7650 and for polyethylene stoppers, see No. 7624.
-
Funnel Squibb Pear PTFE Stpk 1000ml
DWK Life Sciences (Kimble)KIMAX funnel is supplied with a closed-bottom linear, high-density polyethylene stopper to fit in the ground neck, and PTFE stopcock. Lower stems have an I.D. large enough that a column of liquid will "break" with the stopcock closed, thereby giving a more complete separation…
-
Plastic Separatory Funnel Holder
United Scientific SuppliesThis non-corrosive separatory funnel holder, molded in PP, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.
-
PTFE valve These improved PYREX® Squibb type separatory funnels provide an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied complete with PTFE valve assembly and a screw cap with PTFE-faced silicone liner. Valve sizes range from 2 to 8 mm.…
-
Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body
-
Holder Separatory Funnel 125-500ml
Glas-ColThe funnel holder will accommodate up to three funnels at once, depending on size, and can hold funnels as large as 500 ml. You can mount one or two of these holders on the shaker base. Just load the funnels with the stopcock down, adjust to the desired shaking position, and turn on the shaker. The…
-
Separatory PTFE Stopcock Funnels
GSC International, Inc.These borosilicate glass Separatory Funnels have a PTFE stopcock and come with a ground glass stopper. They are commonly used in liquid-based extractions to separate the parts of the mixture. We offer various sizes. PRODUCT WARNINGS WARNING: This product can expose you to chemicals…
-
Sibata Glass Separatory Funnel
Vee Gee ScientificSibata Glass Separatory Funnels Feature smooth tooled tips, white block letters and marking squares Supplied with PTFE stopcocks to eliminate freezing and lubricant contamination Made from high-quality borosilicate tubing with a low coefficient of expansion
-
European style funnel with new leak-tight, locking stopper that will not fall out during shaking or transportation. Outer ground joint at top is a Rodaviss joint. Stopper can be secured in top joint via cap and O-ring for a positive, leak-tight seal; n
-
SYNTHWARE Separatory Funnels with Standard Taper Joint
Kemtech AmericaSeparatory Funnel, Standard Taper Joint Capacity: 10-250mL Available Joints: 14/20, 19/22, and 24/40 available PTFE Stopcock Bore: 2mm Supplied with PTFE stopcock and PTFE or glass penny-head stopper
-
Similar to CG-1742, but with the plain lower stem replaced by an inner standard taper joint of the listed size having a sealed in drip tip. Supplied complete with one listed size flask length stopper.
-
Squibb style separatory funnel with a PTFE stopcock. Not supplied with stopper. For stoppers see CG-3000. Stopcock bore on all sizes is 2mm.
-
Cylindrical shaped separatory funnel having a lower standard taper inner joint and a top outer joint, both being the same size. Graduated with a double scale of numbers, one up from the stopcock and one down from the capacity line. Funnels with 14/20 and 19/22 joints are supplied complete with a…
-
This unique separatory funnel is manufactured with a removable PTFE stem that virtually eliminates breakage normally associated with standard glass stem stopcocks. Made entirely of PTFE, the stem attaches directly to the glass stopcockwithout o-rings or other gaskets. Glassware equipped with…
-
Funnel, Separatory, Removable PTFE Tip
Ace GlassSeparatory funnels, from 125ml to 5 liter. These funnels feature a detachable PTFE drip tip which is not easy to break and is easier to keep clean. Ace-thred tip makes a leak tight connection without the need for an o-ring. Complete unit consists of th
-
Similar to CG-1728, but graduated with a double scale of numbers, one up from the stopcock and one down from the capacity line. Supplied complete with listed size stopper. For replacement stoppers see CG-3018. Dimensions are the same as CG-1726.
-
These 4L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 8 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For…
-
Glass Seperatory Funnel
United Scientific SuppliesSeparatory Funnel, conical Shape with PTFE Stopcock and Plastic Stopper.
-
Globe Style Separation Funnels with Glass Stopper and Stopcock
SP Wilmad-LabGlassThis borosilicate glass pear-shaped separatory funnel is supplied with a Standard Taper glass stopper and a Standard Taper glass stopcock.
-
SQUIBB Squibb-style dropping/separatory funnel TRANSPARENT & DURABLE Made of high quality Borosilicate 3.3 glass - Transparency allows for high visibility FOR SEPARATION Used to transfer liquids - Using the stopcock allows fluids, including reagents, to dispense slowly…
-
Funnel Separatory 1000ml
Glas-ColVentSep, a special 1000 mL separatory funnel with a built-in relief valve, can be used on Glas-Col's Bench-top Shaker or either of the Glas-Col 3D shakers. These separatory funnels feature a built-in relief valve Funnels have a fluoropolymer resin stopcock, and a screw cap with…
-
Funnel 6000 ml
CorningThese 6L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 10 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel The plug also reduces freezing problems and grease…
-
Nalgene™ FEP Separatory Funnels with Closure
Thermo Scientific NalgeneFunnel can be autoclaved; stopcock can be chemically sterilized. No stopcock lubrication needed. So transparent that phase interface is visible down to the stopcock and nonwetting surface—enhances complete drainage Break-resistant and impervious to any chemical used in a separatory…
-
Glass stopcock and glass stopper Stem length of 65 mm
-
Plastic Separatory Funnels
Thermo Scientific NalgenePolyproylene funnels resist virtually all chemicals including hydrofluoric acid (5246T01 to T19) Teflon® TFE stopcock and housing Leakproof closure and stopcock Visible phase interface TFE housing eliminates need for lubrication which reduces the possibility of…
-
Funnel 6000 ml
CorningThese 6L PYREX® pear-shaped separatory funnels have glass No. 10 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.
-
Polypropylene Separatory Funnels
United Scientific SuppliesProviding excellent clarity and strength, this pear-shaped funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self-lubricating PTFE plug, is push-fitted to the stem of the funnel. Not Graduated.
-
These replacement 60mL PYREX® Squibb separatory funnels do not have a Polytetrafluorethylene (PTFE) valve assembly or glass stopper.
-
PEAR Pear-shaped dropping/separatory funnel TRANSPARENT & DURABLE Made of high quality Borosilicate 3.3 glass - Transparency allows for high visibility FOR SEPARATION Used to transfer liquids - Using the stopcock allows fluids, including reagents, to dispense slowly (drop-wise) …