For taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots. 1000ml graduated polypropylene plastic pitcher mounted on an aluminum tube handle Handle has 3 parts, a 91cm…

for sampling Anaesthetic Gases/Vapors, matrix SS net with mix of mol sieve and activated charcoal (30-50 mesh), pk of 20

Originated by Sampling Systems™ over 20 years ago and is a firmly established world leader in powder sampling. The Powder Thief is extensively used throughout the pharmaceutical, chemical and food industries around the world. The PowderThief is suitable for sampling free flowing powders…

The Sludge Judge® II is made from a 1-1/4" (3.18 cm) outside diameter plastic tubing resulting in double the capacity and a very rigid unit when assembled. Designed for sampling 5% or less solids. It holds 6 oz. per foot (178 ml per .31 m) and can be assembled according to the requirements…

The LaboPlast® disposable spatula made of polystyrene is produced and assembled in our clean room of class 7 (10,000) and individually wrapped for disposable use. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to even penetrate directly into…

Open-Ended Drum Thief Soda lime glass units easily broken for quick disposal. All are 43 inches long; capacities from a full 55 gallon drum. Approximate capacity and diameter given in listings.

The SteriPlast® Bio sample spoon made of green PE is produced in our clean room of class 7 (10,000), individually wrapped in bio-PE film for disposable use and then sterilised by gamma rays. Green PE bio-plastic has all the suitable properties of conventional polyethylene but is…

Liquid Sampler 3' 500 mL ( 1212X48 ) Product Dimensions (l x w x h) : 0x2.937x45.75in 3' handle sampler with 500 mL bottle. Manufactured from chemically resistant high density polyethylene this sampling device is perfect for corrosive environments and for hard to reach places.…

Sample Tray for PerkinElmer Series 200 Autosampler. Dilution with tank. Includes: PerkinElmer Part No. N2930044 81-Position Tray and PerkinElmer Part No. B0505677 Glass Diluent Tank.

The SteriWare ViscoThief is simple to use and comes with the added advantage that there is no cleaning validation and no cleaning. The sampler is made in a cleanroom so you simply unwrap and use. This is the ideal sampler for creams, pastes, gels and ointments. The single use ViscoThief is a…

Measuring scoops of polypropylene and polyethylene in a variety of sizes. Volume marked in mL on the handle.

Manufactured in 316L stainless steel with a silicone seal (FDA grade). Available in; 600mm, 1000mm and 1500mm lengths. Sample volumes; 160ml, 300ml and 450ml. Easy to clean. Operation Insert the sampler into the liquid. Pull the handle to take the sample. Withdraw…

The Sampling Systems range of non-sterile and sterile scoops are the scoop of choice for thousands of pharmaceutical and food companies around the world. Our sterile, disposable Scoops (spades) are manufactured in a class 100,000 cleanroom to ensure cleanliness. They are all individually bagged and…

Mini-Pots from Sampling Systems are high quality containers made from 316L Stainless Steel. They have a crevice free interior and are widely used in the pharmaceutical & chemical laboratories worldwide. Available in a range of sizes Satin finish Multi purpose small volume containers …

Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

Sampler for viscous substances such as pastes, mud, creams, oils. The sample is drawn in using the pump rod and directly conveyed to the sampling container. Easy cleaning for flawless sampling. Depending on the viscosity, the removable suction tip can be fitted with suction drills of 2 mm to 6 mm. …

Scoops. Flat Bottom. High-density Polyethylene. 25 mL liquid capacity. Heavy duty scoops with many industrial and laboratory applications. Suitable for liquids and powders.

Twelve-inch rim dip net is fitted with a heavy canvas bag approximately 6½" deep Bag attached to metal frame with clamp rings Bottom of bag is a mesh material of approximately 500 micron nylon Canvas skirt extends three inches below bag bottom to protect mesh Aluminum pole…

SingleSample® Disposable Polyethylene Bailers Eliminates field clean-up and cross-contamination Rugged, high-density polyethylene Each unit individually decontaminated with Liquinox™ washing and DI water rinse Ready-to-use Capacity approximately 1 L Friction-fit nozzle for easy,…

ICRA Liquids Reflector, Pkg. 100

Vis/NIR (400 to 2400nm) 2 x 2m each.

PFA-100 Apex MicroFlow Nebulizer with Ultem manual sampling probe, 90-150 µL/min, 80cm capillary.

The SteriWare™ Disposable Powder Funnel is ideal for transferring powders. Available both sterile & non-sterile. Made from chemically resistant, food grade HDPE. Key Features: Moulded & packed in a Class 100,000 Cleanroom Individually bagged Made from FDA, EC…

The new SteriWare V-Spatula Collection from Sampling Systems are ideal for sampling powders. Available in a range of widths and lengths there is a perfect spatula for every application. Key Features: Moulded & packed in a Medical Cleanroom Individually bagged in ultra-strong…

The range of GL45 containers have the advantage that the lid can be fully removed for full cleaning. The lid comes with a built in adapter to mate with standard GL45 threads. These containers are available in a variety of sizes and come as standard with a highly polished finish. Multi…

Sample Tray for PerkinElmer Series 200 Autosampler. Microvials/high throughput. Replacement parts for PerkinElmer autosamplers are identical to the components contained in your instrument at the time of purchase. Use of these parts will ensure that your sample operates with maximum precision and accuracy.

The PerkinElmer sample with a volume capacity of 10 uL is made from solid stainless steel material and is mainly used in laboratory and manufacturing factories.

SimplOFy™ is a new kit for the standardized collection of 2.0 mL of whole saliva in the simplest way possible. The sample is immediately preserved by a dried stabilizing solution coated to the inside of the tube cap, which stabilizes DNA upon contact. The 12 x 75 mm tube is directly amenable…

During the height of the COVID-19 pandemic, viral testing became the most effective tool to help bring outbreaks and surges under control. However, with new COVID variants on the rise and ongoing supply chain shortage for viral extraction reagents, Mawi DNA directed their focus to develop a…

Suitable for use with powders, granules, liquids, gels or suspensions, these sterile spoons allow set volumes to be accurately measured and sampled. Leveling to top of bowl provides accurately measured samples Made from FDA and EU conforming materials; safe for food, drug and cosmetic use …

The carbon fiber reinforced probes are designed to be mounted to a Z-drive with two probe clamps and without a guide plate. The carbon fiber probes can also be used with the prior version Z-drives, but the guide plate must be used. Most CETAC autosamplers built since January 2009 are equipped with…

Capture water samples from specific depths with this clever tool. The unit is made from impact-resistant PVC, with soft rubber seals that hold up to 1.5 liters of liquid. A unique design allows for hassle-free sample collection: when the desired depth is reached, students simply jerk the attached…