Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…

Oil mist filter for DS402 rotary vane pump. Replacement oil mist filter only, does not include tubing or clamp. Replace oil mist filter every 12mths along with rotary pump oil. Application: For DS402 Rotary Vane Pump. Replacement Oil Mist Filter Only, Replace Oil Mist Filter Every 12Mths Along…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies replacement collapsible ferrule is made of polychlorotrifluoroethylene which offers high tensile strength and good thermal characteristics. This ferrule adapts flangeless tube end fitting of 1/16 Inch and is suitable for integrated sample introduction system (ISIS3) used…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

HPLC separation, followed by ICP-MS detection is well established as the analytical method of choice for speciation analysis of many sample types. As a leader in GC and HPLC systems, columns, and ICP-MS instrumentation, Agilent is at the forefront of hyphenated ICP-MS research and development. For…

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

The Agilent Technologies gas tubing helps to connect nebulizer, make-up and HMI/UHMI aerosol dilution argon gas from instrument to sample introduction components. One tubing each is required for external carrier of makeup and dilution gas. It is suitable for use with 7700, 7800, 7850, 7900, 8800,…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

The Agilent Technologies connector is used to make-up argon gas line at spray chamber end cap. It is compatible with all Agilent ICP-MS models used with scott double pass spray chamber and end cap. Application: For Make-Up Argon Gas Line At Spray Chamber End Cap. Suitable For All Agilent ICP-MS…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Ferrules and connectors are critical components to securing a leak-free flow path in your GC. Agilent is proud to offer a wide selection of supplies for your connection needs, including ferrules varying in size and material, unions, column connectors, and our patented self-tightening column nuts. …

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

ICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.