We offer fit-to-perform Electrode Contacts for your Thermo Electron AA instrument, equivalent to Thermo Electron part 9423 393 95011.

Sapphire injector, bayonet mount. HF-resistant. Used for high matrix geochemistry and HF applications where low ppt Al is not required.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

A variety of evaporation covers are available to fit your apparatus and vessels. Evaporation plugs are used to minimize evaporation by sealing unused ports in the evaporation covers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Nebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Aqueous…

A variety of empty reservoirs is available for packing custom SPE cartridges with bulk Bondesil or other desired sorbents. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies 20-port collection rack offers good storage options to keep test tubes organized.is compatible to use with 10 x 75 mm test tubes and VacElut 20 cartridge manifolds. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Four PTFE-coated 8.74 mm I.D. o-rings are included in the Scott/Cross-Flow Torch Injector O-Ring Kit (N0790440) and two are included in the Cyclonic/Concentric Torch Injector O-Ring Kit (N0790441).

The corrosion-resistant VacElut cartridge manifolds allow simultaneous processing of multiple Bond Elut cartridges. The clear glass base allows observation of the entire sample collection process. Its compact, linear design requires little bench space. This product is only available to U.S.…

FlashPure EcoFlex cartridges are packed with quality silica designed to help maximize cost and performance on any flash purification instrument. Large selection of cartridge sizes Several stationary phases available Luer lock inlet and Luer slip outlet Non-RFID suitable on any…

Captiva syringe filters offer the industry's highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to prepare small-volume samples for High-Performance Liquid Chromatography (HPLC)…

The Agilent Technologies P3311 pH triode combination electrode comes with refilling solution and delivers great and accurate results in chemical laboratories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Cap - UV-Cuvette Micro 100 pcs

Vapor generation provides the best performance for analysis of hydride forming elements such as As, Se, and Hg for ICP-OES. VGA 77 supplies such as tubing, gas-liquid seperators, absorption cells, reagents, and maintenance supplies provide the key consumables need to receive optimal performance…

Sampling and manifold replacement tubing and tubing kits are available to connect an Agilent dissolution tester to a sampling instrument such as the 850-DS dissolution sampling station. These tubings should be replaced on a regular basis. This product is only available to U.S. Domestic Customers.…

Quality Control Standard 21

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: Sample Tubing, For PerkinElmer, FIMS-100, FIMS-400, FIAS-100, or FIAS-400 This product is only…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent burner heads for PerkinElmer PinAAcle/AAnalyst flame AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Nitrous Oxide-Acetylene or Air-Acetylene Operation, For Pinaacle & AAnalyst…

Agilent provides disintegration reaction beakers for the 100 automated disintegration apparatus. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene. The 2.0 mm i.d. Alumina injector is shipped standard with all PerkinElmer ICP-OES instruments. A variety of sizes are available as an…

Bond Elut adapters fit on top of any Bond Elut cartridge and contain a female Luer fitting that accommodates the tip of another cartridge. ASPEC adapter caps produce a positive pressure seal with the needle in the Gilson ASPEC, ASPEC XL and ASPEC XL4 solid phase extraction systems. This product…

Dissolution vessels are used to hold dissolution media during drug release. Agilent provides a variety of dissolution vessels for use with Agilent dissolution apparatus. Selected verified vessels are available containing a Certificate of Conformance (COC). TruAlign vessels for the 708-DS are…

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. …

Agilent Full Flow Filters are made of either ultrahigh molecular weight polyethylene (UHMWPE) or the polyvinylidene fluoride (PVDF). These dissolution cannula filters are relatively inert and can be used for different sample matrices. PVDF cannula filters are available in those instances where…

The Agilent Technologies reservoir with 1 frit provides a capacity of 8 mL. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

V-Solv™ ICP Solvent is a proprietary solvent that is used for diluting oil and other organic liquids for analysis by ICP and ICP-MS. Use V-Solv™ as a matrix blank and as a diluent for your calibration standards and samples for outstanding nebulization characteristics. V-Solv™ ICP Solvent offers the…

Dissolution vessels are used to hold dissolution media during drug release. Agilent provides a variety of dissolution vessels for use with Agilent dissolution apparatus. Selected verified vessels are available containing a Certificate of Conformance (COC). Dissolution peak vessels (Apex vessels)…

The Agilent Technologies tall glass basin is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.