Boiling Flasks
-
Flask, Round Bottom, Ace-Thred Side Port
Ace GlassRound bottom, single neck flask with Ace-Thred side port supplied with our 5029-10 nylon bushing and 7855-704 FETFE o-ring. Bushing is ideal for use with thermometers or bleed tubes of up to 7mm OD. Available in standard and heavy wall versions.
-
Class A Mixing Bulb Style Wide Mouth Flasks with Standard Taper Stoppers
DWK Life Sciences (Kimble)Wide mouths allow easy access into these mixing bulb volumetric flasks for applications such as dissolving tablets and other solids. Mixing bulb in neck accommodates approximately one tenth of the flask’s total volume and is designed to aid in dissolving or mixing the contents of the…
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.
-
Florence Boiling Flasks
EiscoMade of high quality, heavy duty Borosilicate glass Narrow neck, flat bottom, beaded rim. Perfect for any science or home laboratory Florence boiling flask made out of high quality, heavy duty borosilicate glass. Narrow neck, beaded rim and flat bottom. No stopper included. …
-
Round bottom flask with five necks arranged 3 in-line, two 90 degrees front and back of in-line necks. All necks are vertical. Available in heavy wall.
-
Single Neck Flat Bottom Flasks
ChemglassSingle neck, flat bottom flask with a standard taper outer joint.
-
Round bottom, HEAVY WALL single long neck flask with a standard taper outer joint.
-
Borosilicate Glass Flat Bottom Boiling Flasks
United Scientific SuppliesBorosilicate Glass Flat Bottom Boiling Flasks are designed to give the best combination of thermal shock resistance, physical strength, and resistance to chemical attack.
-
Flask, Three Necks, Angled
Ace GlassRound bottom flask, three necks with angled sides. All joints are standard taper. Available in standard and heavy wall.
-
-
Flask 1000 ml Cs30
CorningThese 1L PYREX® round bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
Flask, Two Necks, Vertical
Ace GlassTwo neck, one center and on vertical side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.
-
Angled Two Neck Round Bottom Flasks
DWK Life Sciences (Kimble)Two-neck heavy wall flask with Standard Taper outer joints Side neck is angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Round Bottom Two Vertical Neck Flasks
SP Wilmad-LabGlassWith two vertical necks and a round bottom, these borosilicate glass flasks feature a side neck Standard Taper 24/40 outer joint. The center Standard Taper joint varies with flask capacity.
-
Flask 1000 ml
CorningThis specially designed PYREX® 1L boiling flask is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C).
-
Flask, Single Neck, Spherical, Receiving
Ace GlassWith short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall.
-
SYNTHWARE Round Bottom Flasks
Kemtech AmericaSYNTHWARE round bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.
-
Flask, Round Bottom, Beaded Tube Port
Ace GlassRound bottom, single neck flask with a beaded tube end port.
-
Round Bottom Boiling Flasks, SJ Joint, Heavy Wall, with Plastic Safety Coating
DWK Life Sciences (Kimble)KimCote® plastic-coated single neck flask with a SJ socket joint. Useful as rotary evaporator condensate collection flask or as a replacement for European designation KS 20/35.
-
Single Standard Taper Neck Heavy Wall Round Bottom Flasks
DWK Life Sciences (Kimble)Single neck flask with a Standard Taper outer joint Heavy wall Ref: ASTM Method D95 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
-
Flask, Round Bottom, Single Neck
NDS Technologies5 mL 14/20 center neck Single neck round bottom flask with an outer joint.
-
Borosilicate Glass Round Bottom Boiling Flasks with Ground Glass Joints
United Scientific SuppliesBoiling, round bottom flasks with ground glass joints. Our boiling flasks are made from low-expansion borosilicate glass. Feature uniform wall thickness for superior mechanical strength and shock resistance. Ideal for boiling, heating and mixing in the laboratory.
-
Flask Boiling Flat Bottom 250ml
DWK Life Sciences (Kimble)KIMAX boiling flask with a short joint neck. Designed from ASTM Specification E1403, Type I, Class 4 requirements.
-
-
ValueWare® Flat Bottom Flasks, Short Neck, Full-Length
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Flask, Boiling, Round Bottom, 250ml
DWK Life Sciences (Kimble)KIMAX® round-bottomed boiling flask Reinforced tooled top Designed from ASTM Specification E1403, Type II, Class I, requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
ValueWare® Round Bottom Flasks, Short Neck, Full-Length
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. The three side necks are angled.
-
These PYREX(r) round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
Florence Boiling Flasks
EiscoMade of high quality, heavy duty borosilicate glass Narrow neck, flat bottom, beaded rim Perfect for any science or home laboratory Florence boiling flask made out of high quality, heavy duty borosilicate glass. Narrow neck, beaded rim and flat bottom. No stopper included. Autoclavable, with…
-
SYNTHWARE Flat Bottom Flasks
Kemtech AmericaSYNTHWARE flat bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.