Electrodes Products (0)

Compare Tool

Select up to 3 products

  • > Next
  • Thumbnail Image for Combination pH Electrodes

    Corning

    General Purpose pH Combination (4136L21) AgCl internal reference sealed by ion exchange barrier pH range 0-14 at temperatures from 0° to 100°C Replaceable junction Plastic body 13 mm diameter x 138 mm long. 4136L16 and L21 have removable bulb connector for easy cleaning; also usable with...

  • Thumbnail Image for Orion Ion Selective Electrodes (ISE)

    Thermo Scientific Orion

    Measurements using an ion selective electrode (ISE) are applicable in virtually every laboratory. ISEs can be used to measure ion concentrations in water, food, pharmaceuticals and biological samples. Ion selective electrodes can be used as endpoint indicators or to perform direct measurement and...

  • Thumbnail Image for Ion Selective Electrodes

    Oakton

    Oakton has a large selection of ion-selective electrodes (ISEs) to suit a wide variety of applications. Each electrode has a typical response time of 20 to 30 seconds but will vary with solution concentration. Oakton offers four electrode types: membrane, solid-state, gas sensing, and glass bulb....

  • Thumbnail Image for Ammonia Ion Electrode Accessories

    Thermo Scientific Orion

    Accessories: Ionic Strength Adjusting Solution (ISA) adjusts the pH of standards and samples used in ammonia measurements. Ammonia Standard Solutions; 0.1 M ammonium chloride or 1,000 ppm as N. Replacement Membranes or Membrane Caps; Loose membranes for probes with O-Ring membrane holder; membrane...

  • Thumbnail Image for Fluoride Ion Electrode

    Thermo Scientific Orion

    4210F12 For determination of fluoride ion activity in concentrations from saturated to 10 -6 M (0.02 ppm) Method approved by ASTM for water, drinking water, wastewater and seawater brines and it is approved by EPA, Standard Methods and AOAC for feeds Range saturated to 0.02 ppm Requires 4215F10...

  • Thumbnail Image for ROSS® Sure-Flow® pH Electrodes

    Thermo Scientific Orion

    Ross® Sure-Flow Easy cleaning in waste-waters, food samples, colloids, soils and slurries Has optimum flow rate for high purity waters, drinking waters and buffers Produces fast, stable responses in samples that vary in temperature pH range is 0-14 over a temperature range of 0°-100°C...

  • Thumbnail Image for WTW Dissolved Oxygen Sensor, FDO® 925

    WTW

    The FDO® 925’s small dimensions make it suitable for lab and process . The flow-free, easy-to-clean, beveled membrane allows it to be used in containers with low sample volumes. Low oxygen concentrations under 1 mg/l can also be detected accurately. The fast and flow-free FDO® 925 is...

  • Thumbnail Image for High Performance Ammonia Electrode

    Thermo Scientific Orion

    Designed to meet the demanding needs of drinking water and wastewater applications Accurate results down to 0.01 ppm Linear electrode response down to low detection limits Response time of 1 minute in sample concentrations of 1 ppm and higher New wastewater applications developed using known...

  • Thumbnail Image for SenTix® pH Electrodes

    WTW

    SenTix®: Standard electrodes with gel and precision electrodes with liquid gel electrolyte for pH measurements in lab applications and in the field Maintenance-free gel reference system across the entire product life Quick repsonse time by good connection to the medium for electrodes with liquid...

  • Thumbnail Image for InLab® Maintenance-Free pH Sensors

    Mettler Toledo

    Always Ready Well-equipped for challenging tasks. The highly robust PEEK shaft in combination with the open junction makes the InLab Expert both resilient and easy to handle. Its solid reference electrolyte requires no refilling and is always ready for use. If highest performance is expected, the...

  • Thumbnail Image for Orion ROSS® 3-in-1 Triodes

    Thermo Scientific Orion

    pH and temperature measurement with one electrode Superior stability with high accuracy pH and temperature measurement Fast pH response even in samples at varying temperatures Compatible with Mettler-Toledo TM Five and Seven Series meters and others which accommodate NTC30 thermisters with RCA plugs...

  • Thumbnail Image for 3-in-1 Triode Probes

    Thermo Scientific Orion

    Orion Triode 3-in-1 Probe is a practical solution for field and plant use. The pH/Reference/ATC probes are all in one body. It's non-refillable, little or no maintenance required. You get portability and accuracy in one package.

  • Thumbnail Image for Standard Ag/AgCl pH electrodes

    Thermo Scientific Orion

    Ideal for all routine pH measurements. A large variety of quality electrodes for a wide range of applications. Includes specialty pH electrodes for unique or challenging pH measurements.

  • Thumbnail Image for Combination Electrodes

    Sensorex

    Sealed Ag-AgCl Reference, Epoxy Epoxy plastic body incorporates glass electrode and sealed Ag-AgCl reference electrode in a single stem Range pH 0 to 14, 0° to 100°C Usable at pressures from 0 to 100 psig (690 kPa) Offered in choice of types, each with US Standard or BNC Connector The...

  • Thumbnail Image for InLab® pH Electrode S7 Connector Cables

    Mettler Toledo

    pH Electrode Connector Cables, compatible with Mettler Toledo pH meters.

  • Thumbnail Image for pH Electrode Stand

    Thermo Scientific Orion

    Electrode holders and stands Electrode holders and stands permit one-handed operation of electrode movement Four-position holders allow simultaneous use of pH or ISE electrode and reference half cell Swing arm stand (0732H82) allows flexible movement of electrodes. Holder and stand (4153Y35) permits...

  • > Next

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.