Stirrers
-
Tru-Stir Stirrer Shaft Coupling
ChemglassThe unique design of our Tru-Stir™ stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical stainless steel spring permitting up to 1/4” of offset misalignment and…
-
Magnetic Hotplate Stirrer & Accessories
Oxford Lab ProductsThe Oxford Lab Products BenchMate 20 L Digital hotplate stirrer is a high capacity hot plate stirrer unit. It can heat and mix up to 20 L at one time, with a maximum stirring speed of 2200 rpm. The BenchMate 20L Digital hotplate stirrer is designed for all sorts of mixing applications, from gentle…
-
Stirrer Bearings
ChemglassGrease-Free PTFE stirrer bearing for use under moderate vacuum. The bearing consists of a PTFE standard taper body, Nylon compression cap, PTFE Insert/bushing and a Nylon loosening nut. The PTFE insert/bushing provides only glass and PTFE contact with the reaction. Loosening nut above the standard…
-
Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.
-
Banana Shape PTFE Stirrer Blades
ChemglassBlade is shaped to resemble the contour of a round bottom flask. Blades are available solid or perforated. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
-
1 P Digital Stirr Comp,8L-230V
Bellco GlassBell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring…
-
PTFE 10mm Stirrer Blades
ChemglassStirrer blade made of 1/8" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 10mm OD.
-
Stirrer, Polypropylene
DynalonCome in three different configurations -Two fixed blades, U shape blade and Centrifugal blades. The blades are made of chemically resistant polypropylene and are fixed to a PVC covered steel rod with a diameter of 8 mm (approx. 5/16") x 350 mm (approx. 13 3/4") long. Clockwise…
-
Stirrer Biological Mcs-102L, 117/240V
Techne (Cole-Parmer)The stirrers are designed for optimal suspension cell culture and the use of microcarriers. The system comprises of a stirrer platform and a number of glass culture vessels. MCS-102L accommodates two 1 litre culture vessels Speed range from 0 to 80rpm Softstart/stop for slow…
-
Chem-Stir™ PTFE Stirrer Bearings
ChemglassGrease-Free PTFE stirrer bearing designed for use under moderate vacuum applications. The bearing consists of a threaded glass adapter having an inner joint, a set of PTFE washer style bearings, a stainless steel spring, nylon alignment ring and Celcon® compression cap. The unique design of…
-
Magnetic Induction Stirrer
labForce® (powered by Thomas Scientific)The Magnetic Induction Stirrer is motor-less, using advanced coil technology that produces the strongest magnetic coupling and has no moving parts making this unit 100% wear-free and maintenance free. The magnetic induction stirrer is ideal for use in general research, life science,…
-
Precision ground glass stirring shaft, 10mm OD, attached vanes. Vanes will fit through a 45/50 joint and are contoured for use with our 9448 and 9456 series Mini-Lab flasks. Use with Trubore bearings 8036, 8038, 8039, 8040, 8042, 8043, 8047, 8051, 8053 and 8055. Compatible with our 8050 mechanical…
-
Chem-Stir™ 10mm Polished Stirring Shafts
ChemglassA 10mm OD precision ground and polished stirrer shaft with our patented** Chem-Stir™ blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt…
-
Material: 316l stainless steel ra32 finish or better inside & out Includes: dust shield, impeller shaft folding paddle Locking ring secures paddle in horizontal position Dimensions: 3"x14"
-
RT2 Advanced Hotplate Stirrers and Accessories
Thermo ScientificRT2 Advanced Hotplate Stirrer Experience precision with our low-profile digital display hotplate stirrer, equipped with PT100 sensor for precise temperature measurements for sensitive experimental procedures. FEATURES Digital control Overheat prevention circuit turns off…
-
Stirrer Carboy 10 L & 20 L
Thermo Scientific NalgenePolypropylene screw closure Teflon TFE stir bar Polyvinylidene fluoride, stainless steel reinforced shaft TFE impeller Ideal for low-speed mixing of large volumes of media and buffer solutions on a magnetic stir plate For use with Nalgene 10 and 20-liter carboys with 83B (83-mm)…
-
Button type, solid glass stirring shafts, 5 & 6mm OD. Precision ground shafts, codes -04 & -06, should be used in matching glass Trubore 9524 and 9527 bearings. Polished shaft, code -40, should be used only in our 8066-120, 6mm PTFE inner bearing. All accept our 9542 blades. Join to stirrer motor…
-
PTFE Flake Catching Cups
ChemglassCup is designed to catch all flaking that occurs with PTFE stirrer bearings. Made entirely of PTFE, the complete item consists of a compression fitting, deep perforated PTFE cup and a 50 micron porosity PTFE filter disc.
-
Ultra-flat compact magnetic stirrer, guaranteed with modern magnet coil technology. Wear-free drive with no moving parts. To ensure better mixing, the lab disc can reverse direction of rotation automatically every 30 seconds. High IP protection class (IP 65) Set-up plate and casing made…
-
The ultimate in compact design measuring only two by four inches. The BDC250 offers great capabilities in a small package; used in formulation, R&D, clinical research, education labs, anywhere a magnetic stirrer is used. It fits into small spaces and can be easily transported to other labs or…
-
Air-Driven Stirrers
Arrow EngineeringModel 8583J10: Produces propeller speeds from approximately 200 to 10,000 rpm Compact and quiet; operates on compressed air at pressures from 30 to 100 psi (210 to 690 kPa) Sturdy, smooth-running motor develops 1/6 hp (120 W) at 80 psi (550 kPa) input Speed is variable by adjustment…
-
Angled Stirrer Blades
ChemglassAgitators are made entirely of PTFE and glass filled PTFE and are for use with 19mm or 25.4mm OD stirrer shaft CG-2097 and are available in 45°, 60° and 90° impeller angles. The 45° and 60° impellers are set up to stir downwards in a clockwise direction and upwards when rotated…
-
Stirrer Bearing, PTFE, 6-10MM Shafts
Ace GlassPTFE stirrer bearing featuring a non-shedding, fully enclosed, anti-whip, chemically resistant design. Models available for 6, 8 and 10mm glass, metal or PTFE stir shafts. Can be used in slight pressure or vacuum applications. Maximum recommended speed for continuous operation is 500 rpm. Unlike…
-
SP BEL-ART COOL STIR LARGE VOLUME MAGNETIC STIRRER; 15½ X 15½ X 9½ IN.; FOR 10…
Bel-Art - SP SciencewareThe Cool Stir® Large Volume Magnetic Stirrer efficiently stirs fluid volumes from 10 liters up to 208 liters (2.5 to 55 gallons). Stirring speed is continuously changeable to around 600 rpm (maximum operational rpm depends on volume and density) delivering torque for mixing through powerful…
-
-
Four-Blade PTFE Agitator Stirrer Blades
ChemglassAgitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45°, 60° and 90° impeller angles. The 45° and 60° impellers are set up to stir downwards in a clockwise direction and upwards when rotated…
-
Electric Laboratory Stirrers
Arrow EngineeringElectronically controlled and built to handle viscosities ranging from light watery solution to high viscosity fluid Totally enclosed, non-ventilated motor keeps corrosive fumes and dust out for a long and trouble-free service life Permanent-magnet, D.C. motor provides maximum constant torque…
-
Stirring Shaft, Glass, Polished, 10mm
Ace GlassPolished glass stirring shafts, 10mm OD. Recommended for use with only our 8050,8066,13443 and 13445 bearings. Join 8083,8085,8086,8087,8096 blades to button type shafts. Join 8088, 8089, 8090 & 8091 agitators to bead type shafts. Plain shafts will accept 8094 & 8095 agitators secured with a…
-
Bearing, Trubore, 5 & 6mm
Ace GlassTrubore bearing with standard taper joint for use with our 9534, 9535 and 9541 precision ground stir shafts. Lubricant well at top will accept enough 8117 Stir-Lube to provide hours of operation at up to 1000 rpm. Match bearing ID with stir shaft OD.
-
Telescopic H-Stand
VELPThe VELP Telescopic H-Stand allows even heavy accessories to be lifted and lowered effortlessly. The stand has an adjustment handle to move the stirrer. The Telecopic H-Stand is compatible with all VELP Overhead Stirrers.
-
Stir Shaft, Retreat Agitator, PTFE
Ace GlassPTFE covered stainless steel shaft with a solid PTFE retreat curve agitator. Featuring a retreat angle of 30 degrees and, for a better grip by the stir motor chuck,50mm of exposed stainless.