The Phipps & Bird state-of-the-art programmable model elevates jar testing to a new level of precision by utilizing four operator-programmable memory banks that offer virtually unlimited stirring capabilities: Each bank may be programmed with paddle speeds from 5 to 300 rpm in 1-rpm…

Blade is shaped to resemble the contour of a round bottom flask. Blades are available solid or perforated. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.

Support Stand Steel base; legs have rubber pads to cut vibration Support rod is made of stainless steel. Height is 29”; available in two models. Jacob's Chuck, Adjustable Fits 3/8 ” (10 mm) diameter motor shafts Keyless Chuck, Nylon-bodied …

High-performance multi-position magnetic stirrer with 10 stirring position, optimum use of laboratory space The stainless steel surface covers the unit allowing easy cleaning and providing protection against the penetration of liquids Simultaneously operating stirrers, absolute consistency…

RT2 Advanced Hotplate Stirrer Experience precision with our low-profile digital display hotplate stirrer, equipped with PT100 sensor for precise temperature measurements for sensitive experimental procedures. FEATURES Digital control Overheat prevention circuit turns off…

RT Basic Series Magnetic Stirrers Experience the reliability of our plug-and-play stirrers, ideal for routine stirring applications. FEATURES Strong magnetic coupling to ensure consistent stirring during experimental procedures Three size options Low profile lightweight…

Consistent, reliable stirrer speed Digital display Glass ceramic top Conserves lab space Easy-to-use stirrers with digital displays indicate stir speed settings. Microprocessor-controlled feedback maintains consistent repeatable stir speed. Control automatically adjusts motor strength to…

These Corning® stirrers have a durable glass-ceramic 4 x 5 inch Pyroceram® top and offer superior performance and reliability in a low profile, space-saving design. Exclusive closed-loop stirring control monitors and regulates the stirring speed for aqueous, viscous, or semi-solid solutions. A…

The Heidolph overhead stirrers of the Hei-TORQUE series are perfectly designed for powerful stirring, in order to achieve best mixing results even for very challenging applications. Hei-TORQUE Value These stirrers are ideal for standard stirring tasks. They are designed to mix and…

Caframo’s high torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high performance Brushless Direct Current (BDC) motor. A unique two speed transmission provides incredible amounts of power. Caframo…

Precision ground glass stirring shaft with attached vanes, 10mm. For use when agitation and gas introduction are desired at the same time. Agitator will fit through a 45/50 joint. Designed for use with our 9523 Trubore bearing and 9443 or 9446 mini-lab flask heads. Introduced gas exits the hollow…

Reliable DC motors Available in 4, 5 and 9 position models Stirs at speeds up to 2,000 rpm Stir up to 9 vessels at the same time with these Multi Position Stirrers. The stirrers' magnets and DC motors provide smooth well-coupled stirring up to 2,000 rpm. The speed of all positions on the units…

The MICROSTIRRER is a magnetic stirrer with epoxy painted metal structure that ensures a high resistance to chemical agents. A small, simple and efficient stirrer specially designed for microtitrations. The MICROSTIRRER remains cold even after several days of continuous use, a feature that is…

OHAUS offers four models for stirring capacities between 25 to 200 L allowing you to choose the right model for your application. The broad top plate surface allows processing of oversized vessels such as carboys for your large volume stirring. The powerful magnetic drive is also capable of mixing…

Bell-ennium Process Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment.  The Front-End models are designed to position so that one flask is positioned behind the other, minimizing the…

RT Basic Series Magnetic Stirrers Experience the reliability of our plug-and-play stirrers, ideal for routine stirring applications. Features: Strong magnetic coupling to ensure consistent stirring during experimental procedures Three size options Low profile lightweight…

OBOD/BOD probe power stirrer adapter for MultiLab with input for up to 3 stirrers. Allows connection of multiple OBOD/BOD probes to multi-channel MultiLab instruments.

Stirrer Shafts, with 4-Blade Propeller Shaft diameter 6.4 mm, with stainless steel, 4-blade propeller on one end Listings show shaft length x propeller diameter Stirrer Shaft, with 3-Blade Propeller 8 mm-diameter shaft has stainless steel propeller and includes coupling Shaft length 222…

Bell-ennium Digital Magnetic Stirrer 9 Position Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment.  Bell-ennium stirrers offer the laboratory researcher a wide range of…

“Power Hold” Universal Clamps (8583L36 and L40) Designed with large knobs for powerful gripping plus an adjustable stop for speed and safety in set up and operation Made with precision machined aluminum rod for strength and durability Used for most applications Will hold any stirrer with…

Safely conduct applications with aggressive media in high-humidity environments with the Thermo Scientific™ Cimarec™ i Telesystem 15 Position with Telemodul 40 C Stirrer. Stirrer is designed for integration with incubators and controlled climate chambers 15 position stirrer…

The ultimate in compact design measuring only two by four inches. The BDC250 offers great capabilities in a small package; used in formulation, R&D, clinical research, education labs, anywhere a magnetic stirrer is used. It fits into small spaces and can be easily transported to other labs or…

An economical solution made for ultimate function The Mini Magnetic Stirrer by labForce® is an economical solution made for ultimate function with optimal magnetic coupling to ensure dependable stirring efficiency. A powerful magnetic coupling of the high-quality stir bar and the…

Speed range: 60-2000 rpm Stepless speed control Ambient temperature range: 5 to 40°C The RW 20 digital stirrer offers two speed ranges for universal use from 60 to 2000 rpm. Stirrer has a slim ergonomic design, digital display and constant power drive. Push-through agitator…

The ARE 5 Hotplate Stirrer is the product of choice since 1983 for basic heating and stirring laboratory requirements. A reference for many laboratories around the world ranging from universities and research centers to industrial laboratories. The 135 mm diameter aluminum alloy top plate…

Totally enclosed, 1/40hp DC permanent magnet motor with dual 8 mm (5/16") armature and gear shafts with milled flats. Armature shaft with maximum speed of 4000rpm.; 18:1 ratio gear shaft rated 3.6in-lb torque, up to 333rpm. Motor supplied with 1.5 meter 3-wire cable for controller connection.…

Scilogex offers two efficient and carefully controlled digital overhead stirrer models for the safe and effective mixing of large volumes of liquids. LCD and LED Digital overhead stirrer models offer considerable functionality that would not be available on a standard analog overhead stirrer.…

Programmable Single position or four position models High/Low speed stirring MagStir Genie is a single position magnetic stirrer. It may be used with any regular flask/beaker or spinner flask and a maximum sample weight of 5.0 kg. MultiMagStir Genie is a multi-position digital…

Glass bearing design for use with Ace-Thred pressure reactors and our 8075 glass, polished or 8074 bare, stainless steel 10mm stirring shafts. Both the top bushing and bottom coupling are PTFE. Maximum operating speed is 600 rpm.

Stands Extra strong retort stands with H-pattern base for stability and robust support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer.   Paddle Rods Made from high grade stainless steel, there is a choice of five…

These Corning® PC-611 stirrers have an 11 x 11 inch plastic (ABS) top and can stir large volumes of liquid with ease. These stirrers are designed for 5 gallon vessels (19L), but can stir up to 10 gallons and can handle many applications that previously required an overhead stirrer. This powerful…