Fitting on 5/8" (16mm) support rods or smaller, this stamped steel clamp is plated for corrosion resistance and has a steel thumbscrew. The clamp is 9" (229mm)long by 3" (76mm) wide with a center distance 7-1/4" (184mm) between burettes. The unit is designed for use with burettes from 6mm to 16mm…

Standard taper keck type joint clips Color coded for easy size identification Will not corrode or scratch glassware Can withstand temperatures up to 302°F (150°C)

Corning offers a stainless steel, two piece, 18" (45.7cm) support rod with a 5/16" (0.8cm) diameter that consists of two 9" rods that screw together. It screws into the base of Corning hot plate and stirrer models PC-400/410/420, PC-400D/410D/420D and PC-600D/610D/620D.

Burner tri-pod with cast iron ring and nickel plated threaded legs. Sold individually.

Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.

The Universal H-Stand ensures stability and compatibility with all VELP Overhead Stirrers. It is possible to adjust the stand in order to adapt it to an uneven surface.

Clamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.

These non corrosive molded support stands provide excellent alternatives to metal ones. Even the metallic rod has a polypropylene covering making it non corrosive. Each support base comes with a 0.5" diameter 30" long rod.

Test tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.

Stainless steel electro-polished finish or nickel-plated zinc Large grip adjustment range 2-prong construction Single or dual adjust Designed to securely hold laboratory glassware and apparatus. Extension arm attaches clamp head securely and offers easy positioning in the deepest…

Clamp Retort, 3 Prong, Powder coated 3 Prong, Powder coated clamp Over all Length 10" Prongs have 2" of PVC coating. Clamping tommy-bar screw through swivels, Clamping tommy-bar screw through swivels, mounted on 5.625" rod. Rod dia. 8 mm (0.315") Jaw…

The Humboldt Funnel Support is designed to accept up to four funnels. The unit consists of a hard wood support with four slotted holes and a metal clamp with thumbscrew for support rod mounting.

Heidolph RZR 1 overhead stirrer with tools and accessories features 2 gears delivering 280 to 2200rpm with analog control. 115v 60Hz input motor is high torque, up to 100Ncm. Use code -32 stir shaft for slow speed, up to 250rpm and code -34 shaft for speeds up to 2200rpm. Universal stand and clamp…

Nickel plated steel. Overall length 5".

Two prong zinc-plated, stamped steel with aluminum alloy holder is adjustable by checknut to any angle Takes objects from 3/8” to 1 3/8” diameter. Fits rods up to 1/2” diameter. Length: 6 3/8”.

Aluminum alloy clamp Metal clamping screws Includes: (1) Boss head For use with laboratory stands, this popular boss head is made of die casted alloy with a powder coat finish. It accepts rods at a right angle to one another. Metal thumbscrews allow for adjustment.  

Nylon Closed connector for 1/2" Rods with hex head bolt Corrosion-resistant; they will not corrode or rust Accommodates (1/2") rod Locked with nylon hex head bolt

Suspend two funnels simultaneously using this polypropylene holder. These corrosion-resistant holders can be used with 3" to 6" diameter funnels, and include an extra plate to accommodate 1" to 3" diameter funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.

Floor style stainless steel support stand made to accept 12 and 22 Liter CG-1539 half jacketed flasks. Stand is 67in overall height with a depth of 22in. Ring has a diameter of 8 1/2in I.D. and is 28in above floor level. Top of stand has a 39in reinforced riser to support overhead stirrers, clamps etc.

These brass Stoddard-style test tube clamps are available both with and without finger grips. We also sell test tube clamps made from nickel-plated steel . PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are known to the State…

FlowLinX Pinch Valves are suited for high purity applications where liquid flow control and shut off are necessary.   Made of glass reinforced nylon, these highly durable pinch valves can be used with unreinforced and braid reinforced tubing and hose.   The pinch…

Cast aluminum clamp holder for use with rods up to 19mm in diameter. For use when clamping at 90° is required. This clamp features a min to max grip range of 0-21mm and a v-grove bearing length of 55mm.

Shelf can be attached to any lattice setup using the supplied CG-9250-01 clamp holder. Shelf is 9" wide x 10" deep and anodized green with a neoprene surface to prevent items from slipping off. The 1/2" square support rod is 7.5" long. Square support rod prevents shelf from…

Useful for mounting stirrers and other general equipment to lab frames. Small physical size takes up very little space. Solid aluminum construction holds items up to 4.3 lbs.

The support feet are of non-ferrous alloy, two inches in diameter, 16mm high, with set screw for fastening lattice frame rods. Provided without mounting screws. Foot has four holes for attaching to bench, floor or wall.

All stainless steel, fully adjustable clamps for securing and supporting circulator hoses used with jacketed pilot plants. The universal clamps adjust to any pipe style pilot plant stand, and the clip will accommodate any standard circulator hose size.

Flask clamps and universal platforms for shakers. Fits onto standard platforms. Purchase individual pieces to build various configurations. Specifications: 25x25cm Tray Accepts 9 51x51cm Tray Accepts 25

CLAMPS, BURET, Clamp will hold two burets from micro to 100mL. Spring loaded mechanism adjusts simply by squeezing, yet hold buret firmly in place. Mounts directly to standard support rod with built in hook connector. Constructed of epoxy coated aluminum with vinyl jaws. CHEMGLASS LAB CLAMPS,…

These steel rings are intended to suspend flasks on a support stand. We offer multiple sizes. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are known to the State of California to cause cancer, birth defects, or other reproductive…

A Standard Taper clamp made of corrosion-free stainless spring wire.

Tripod Clamp used with a variety of our handheld instruments. This small 4654 tripod supports the instrument at a convenient viewing angle Ideal in the lab or any other level surface

These economical KECK adapters, clamps, and clips will not scratch glass or corrode—ideal for glass and tubing assembly. All KECK products are color-coded for fast, easy size identification. Use quick disconnect adapters for safe, convenient tubing-to-tubing or tubing-to-glass connections.…