Lab Filtration Products
Lab filtration products play a crucial role in ensuring precise results and maintaining the integrity of your samples.
Explore our diverse selection, including Neoprene filter adapters, Rapid-Flow sterile filter storage bottles, SPIN filters, cell strainers, and indicating oxygen traps. These products are designed to make your lab processes more efficient, accurate, and reliable.
In this category, you'll find trusted brands such as PerkinElmer, Chemglass, MP Biomedicals, and our very own Thomas brand, all known for their commitment to quality and innovation in lab filtration technology.
Whether you require Lab Filtration accessories, cell strainers, Buchner funnel filter adapters, or filter adapter Buchner funnel systems, you'll find a wide variety of options to suit your specific lab requirements. Choose from different materials, sizes, and configurations to ensure your lab filtration needs are met.
Elevate your lab's filtration processes with our Lab Filtration Products, and experience the difference that quality and variety can make in your research and analysis endeavors.
-
Rapid-Flow™ Sterile Filter Storage Bottles
Thermo Scientific NalgeneSave time and minimize contamination with radiation-sterilized Thermo Scientific™ Nalgene™ Rapid-Flow™ Filter Storage Bottles. Use with Nalgene Bottle-Top Filters or as replacement/extra receptacles for Nalgene Tissue Culture and Sterilization Filter Units. Excellent as single-use…
-
Air/Acetylene Filter Assembly
PerkinElmerIncludes filters for both compressed air and acetylene. Two-stage, high-efficiency coalescing filter system removes oil, water, and solids from compressed air down to 99.99% at 0.1 micron. Removes particulate and acetone droplets from acetylene to 99.99% at 0.1 micron protecting your…
-
Filter Dryer Kit
PerkinElmerRemoves moisture and particulates from your purge gas Includes all the necessary fittings needed to make pneumatic connections easy Tape and tubing are not included
-
Polypropylene Syringe Filter Holder
Advantec MFSThermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…
-
Polysulfone Vacuum Filter Holders
Advantec MFS47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…
-
Click-On Inline Super-Clean Traps are inline traps designed with Click-On adaptor connectors which allows inline cartridges to be exchanged without introducing oxygen. Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need…
-
-
High Pressure In-Line Filter Holder, Stainless Steel
Advantec MFSHigh-quality and durable, this 47mm stainless steel in-line pressure holder can operate at high pressures up to 1420 psi (9.8 MPa). Standard FPM(Viton) O-rings are compatible with many aggressive liquids and gases. Type 304ss body and type 316ss sintered support screen. An optional…
-
Cell Strainers
BiologixMade of sturdy polypropylene and strong nylon mesh Three different pore sizes available: 40μm, 70μm, or 100μm, strainers are color-coded according to pore size for convenience Fits perfectly into Biologix 50mL Centrifuge Tubes Gamma radiation sterilized, non-pyrogenic
-
Cartridge systems make changing gas filters quick and easy. A base plate allows cartridges to be exchanged without introducing oxygen. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no longer a need for loosening and…
-
Ultra Clean Oxygen Filter for GC and GC/MS
PerkinElmerThe easy to use leak-tight cartridge system enables rapid change of exhausted cartridges without interrupting supply or system operation. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no longer a need for loosening and…
-
Stainless Steel Connector, Double Version (1)
PerkinElmerConnectors are compatible with our Click-On Traps: N9306100, N9306101, N9306102, N9306103, N9306104, N9306105, N9306106 and N9306107
-
Ultra Clean Hydrocarbon Filter for GC and GC/MS
PerkinElmerThe easy to use leak-tight cartridge system enables rapid change of exhausted cartridges without interrupting supply or system operation. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no longer a need for loosening and…
-
XX6700P01
MilliporeSigmaDispensing pressure vessel, 1 gallon Dispensing pressure vessels hold liquid for filtration through Millipore pressure-operated filter holders when connected to an external pressure source. Type 316 stainless-steel body and fittings; Viton gaskets and O-rings; molded neoprene rubber…
-
-
Chemically Resistant PFA In-Line Filter Holders
Advantec MFSFilter acids, alkalis, or organic solvents Dual support screens allow flow in either direction Perfluoroalkoxy(PFA) polymer is very similar to PTFE resin. The PFA holder offers superior chemical compatibility and can be used with chemically aggressive liquids. Dual support screens allow…
-
Storage Bottles
NEST Scientific USAIt is mainly used in tissue culture media and biological fluids for separation and purification of large volume samples. The whole set includes membrane diaphragm, a graduated, transparent polystyrene funnel connected to a receiving bottle by a connector. The disposable vacuum filter utilizes a…
-
Standard Cut Off Filter
PerkinElmerThe PerkinElmer standard cut-off filter with a wavelength of 290 nm is primarily used in laboratory and manufacturing factories.
-
ULPA filtered enclosure for SC-4 Autosampler
PerkinElmerThe enclosures can be configured either as a dust cover or ULPA-filtered mini-environment.
-
The glass indicating trap clearly shows when the filter needs to be replaced with the use of color changes. The packing material is a silica-based environmentally friendly substitute for cobalt dioxide (blue) in the moisture indicator. Available as a kit with the necessary 1/8" brass connectors,…
-
Ultra Clean Moisture Filter Bundle (2 filters)
PerkinElmerCartridge systems make changing gas filters quick and easy. A base plate allows cartridges to be exchanged without introducing oxygen. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no longer a need for loosening and…
-
Glass Support Base
Vee Gee ScientificGlass Support Base, for Stainless Steel Screen Glass Support Base, Fritted
-
47 mm Screen, Filter Support, S / S
DWK Life Sciences (Wheaton)Designed to handle up to 1000mL of liquid for analysis of particulate or microbiological contamination Glass components manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Flasks have a #2 hose connection for…
-
-
Accessories for BVC Fluid Aspiration Systems
BrandTech®Accessories for BVC BioChem VacuuCenter Systems.
-
The Barnstead accessory is suitable for use with all kinds of Barnstead RO and TII water purification systems.
-
The PolyScience Air Filter with Frame
PerkinElmerFor use with the PolyScience® WhisperCool™ Refrigerated Chiller 240 V, 50 Hz, 12.2 A part number N0772045 and the PolyScience® WhisperCool™ Refrigerated Chiller 208-230 V, 60 Hz, 12.2 A part number N0772046
-
Replacement Air Intake Filter for oil free Compressor
-
Reservoir elliminates the need for a pressure vessel Filter small batches of liquid Available in type 304ss or 316ss These quality stainless steel holders are designed for filtering small batches of liquid without having to use a separate pressure vessel. There are separate ports for…
-
Replacement Air Filter Element for Filter Assembly N0775325
-
Stainless Steel Gas In-Line Filter Holders
Advantec MFSThreaded locking ring enables filter changes without disconnecting the gas lines. Dual support screens protect the membrane filter from reverse pressure surges and allow forward and reverse flow. Tighten by hand only - hand torque maximum is 15 lbs/in. Type 304ss body and support screen.…
-
The easy to use leak-tight cartridge system enables rapid change of exhausted cartridges without interrupting supply or system operation. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no longer a need for loosening and…